* [PATCH v2] dt-bindings: display: anx7814.txt: convert to yaml
@ 2020-04-27 8:46 Ricardo Cañuelo
2020-04-27 9:09 ` Sam Ravnborg
0 siblings, 1 reply; 3+ messages in thread
From: Ricardo Cañuelo @ 2020-04-27 8:46 UTC (permalink / raw)
To: devicetree; +Cc: kernel, dri-devel, robh+dt, enric.balletbo
This converts the Analogix ANX7814 bridge DT binding to yaml. Port
definitions and descriptions were expanded, apart from that it's a
direct translation from the original binding.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
---
Changes in v2 (suggested by Enric Balletbo):
- File name change: use full compatible string.
- Binding description removed.
- #address-cells and #size-cells properties removed from ports node.
- Example node renamed: anx7814 -> bridge.
Tested with:
make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml>
make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml>
.../display/bridge/analogix,anx7814.yaml | 124 ++++++++++++++++++
.../bindings/display/bridge/anx7814.txt | 42 ------
2 files changed, 124 insertions(+), 42 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 000000000000..5459336ac2f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+ - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+properties:
+ compatible:
+ enum:
+ - analogix,anx7808
+ - analogix,anx7812
+ - analogix,anx7814
+ - analogix,anx7818
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+ interrupts:
+ maxItems: 1
+ description: Should contain the INTP interrupt.
+
+ hpd-gpios:
+ maxItems: 1
+ description: Which GPIO to use for hpd.
+
+ pd-gpios:
+ maxItems: 1
+ description: Which GPIO to use for power down.
+
+ reset-gpios:
+ maxItems: 1
+ description: Which GPIO to use for reset.
+
+ dvdd10-supply:
+ maxItems: 1
+ description: Regulator for 1.0V digital core power.
+
+ ports:
+ type: object
+ description:
+ A node containing input and output port nodes with endpoint
+ definitions as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+
+ properties:
+ port@0:
+ type: object
+ description: Video port for HDMI input.
+
+ properties:
+ reg:
+ const: 0
+
+ port@1:
+ type: object
+ description:
+ Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+ properties:
+ reg:
+ const: 1
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - hpd-gpios
+ - pd-gpios
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx7814: bridge@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ anx7814_out: endpoint {
+ remote-endpoint = <&edp_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
deleted file mode 100644
index 17258747fff6..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible : Must be one of:
- "analogix,anx7808"
- "analogix,anx7812"
- "analogix,anx7814"
- "analogix,anx7818"
- - reg : I2C address of the device
- - interrupts : Should contain the INTP interrupt
- - hpd-gpios : Which GPIO to use for hpd
- - pd-gpios : Which GPIO to use for power down
- - reset-gpios : Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply : Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
- anx7814: anx7814@38 {
- compatible = "analogix,anx7814";
- reg = <0x38>;
- interrupt-parent = <&gpio0>;
- interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
- hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
- pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
- port {
- anx7814_in: endpoint {
- remote-endpoint = <&hdmi0_out>;
- };
- };
- };
--
2.18.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] dt-bindings: display: anx7814.txt: convert to yaml
2020-04-27 8:46 [PATCH v2] dt-bindings: display: anx7814.txt: convert to yaml Ricardo Cañuelo
@ 2020-04-27 9:09 ` Sam Ravnborg
2020-04-27 9:50 ` Ricardo Cañuelo
0 siblings, 1 reply; 3+ messages in thread
From: Sam Ravnborg @ 2020-04-27 9:09 UTC (permalink / raw)
To: Ricardo Cañuelo
Cc: devicetree, enric.balletbo, robh+dt, kernel, dri-devel
Hi Ricardo.
On Mon, Apr 27, 2020 at 10:46:58AM +0200, Ricardo Cañuelo wrote:
> This converts the Analogix ANX7814 bridge DT binding to yaml. Port
> definitions and descriptions were expanded, apart from that it's a
> direct translation from the original binding.
>
> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
One comment below, with that fixed:
Acked-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> Changes in v2 (suggested by Enric Balletbo):
>
> - File name change: use full compatible string.
> - Binding description removed.
> - #address-cells and #size-cells properties removed from ports node.
> - Example node renamed: anx7814 -> bridge.
>
> Tested with:
> make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml>
> make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml>
>
> .../display/bridge/analogix,anx7814.yaml | 124 ++++++++++++++++++
> .../bindings/display/bridge/anx7814.txt | 42 ------
> 2 files changed, 124 insertions(+), 42 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
> delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
> new file mode 100644
> index 000000000000..5459336ac2f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
> +
> +maintainers:
> + - Enric Balletbo i Serra <enric.balletbo@collabora.com>
> +
> +properties:
> + compatible:
> + enum:
> + - analogix,anx7808
> + - analogix,anx7812
> + - analogix,anx7814
> + - analogix,anx7818
> +
> + reg:
> + maxItems: 1
> + description: I2C address of the device.
> +
> + interrupts:
> + maxItems: 1
> + description: Should contain the INTP interrupt.
> +
> + hpd-gpios:
> + maxItems: 1
> + description: Which GPIO to use for hpd.
> +
> + pd-gpios:
> + maxItems: 1
> + description: Which GPIO to use for power down.
> +
> + reset-gpios:
> + maxItems: 1
> + description: Which GPIO to use for reset.
> +
> + dvdd10-supply:
> + maxItems: 1
> + description: Regulator for 1.0V digital core power.
> +
> + ports:
> + type: object
> + description:
> + A node containing input and output port nodes with endpoint
> + definitions as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> + Documentation/devicetree/bindings/graph.txt
> +
> + properties:
> + port@0:
> + type: object
> + description: Video port for HDMI input.
> +
> + properties:
> + reg:
> + const: 0
> +
> + port@1:
> + type: object
> + description:
> + Video port for SlimPort, DisplayPort, eDP or MyDP output.
> +
> + properties:
> + reg:
> + const: 1
> +
> + required:
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - hpd-gpios
> + - pd-gpios
> + - reset-gpios
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c0 {
Name this i2c
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + anx7814: bridge@38 {
> + compatible = "analogix,anx7814";
> + reg = <0x38>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
> + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + anx7814_in: endpoint {
> + remote-endpoint = <&hdmi0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + anx7814_out: endpoint {
> + remote-endpoint = <&edp_out>;
> + };
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
> deleted file mode 100644
> index 17258747fff6..000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Analogix ANX7814 SlimPort (Full-HD Transmitter)
> ------------------------------------------------
> -
> -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> -designed for portable devices.
> -
> -Required properties:
> -
> - - compatible : Must be one of:
> - "analogix,anx7808"
> - "analogix,anx7812"
> - "analogix,anx7814"
> - "analogix,anx7818"
> - - reg : I2C address of the device
> - - interrupts : Should contain the INTP interrupt
> - - hpd-gpios : Which GPIO to use for hpd
> - - pd-gpios : Which GPIO to use for power down
> - - reset-gpios : Which GPIO to use for reset
> -
> -Optional properties:
> -
> - - dvdd10-supply : Regulator for 1.0V digital core power.
> - - Video port for HDMI input, using the DT bindings defined in [1].
> -
> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> -Example:
> -
> - anx7814: anx7814@38 {
> - compatible = "analogix,anx7814";
> - reg = <0x38>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
> - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
> - port {
> - anx7814_in: endpoint {
> - remote-endpoint = <&hdmi0_out>;
> - };
> - };
> - };
> --
> 2.18.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] dt-bindings: display: anx7814.txt: convert to yaml
2020-04-27 9:09 ` Sam Ravnborg
@ 2020-04-27 9:50 ` Ricardo Cañuelo
0 siblings, 0 replies; 3+ messages in thread
From: Ricardo Cañuelo @ 2020-04-27 9:50 UTC (permalink / raw)
To: Sam Ravnborg; +Cc: devicetree, enric.balletbo, robh+dt, kernel, dri-devel
On lun 27-04-2020 11:09:00, Sam Ravnborg wrote:
> Hi Ricardo.
>
> On Mon, Apr 27, 2020 at 10:46:58AM +0200, Ricardo Cañuelo wrote:
> > This converts the Analogix ANX7814 bridge DT binding to yaml. Port
> > definitions and descriptions were expanded, apart from that it's a
> > direct translation from the original binding.
> >
> > Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
>
> One comment below, with that fixed:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> ...
>
> > +
> > + i2c0 {
> Name this i2c
Hi Sam,
Thanks for the review, I'll do that.
Cheers,
Ricardo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-04-27 9:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-27 8:46 [PATCH v2] dt-bindings: display: anx7814.txt: convert to yaml Ricardo Cañuelo
2020-04-27 9:09 ` Sam Ravnborg
2020-04-27 9:50 ` Ricardo Cañuelo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).