From: Rob Herring <robh@kernel.org>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>,
dri-devel@lists.freedesktop.org,
linux-rpi-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Maxime Ripard <maxime@cerno.tech>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas
Date: Mon, 27 Apr 2020 16:32:00 -0500 [thread overview]
Message-ID: <20200427213200.GA30618@bogus> (raw)
In-Reply-To: <abfe72e59b796c86820d933bd81ba5ae0699e5b6.1587742492.git-series.maxime@cerno.tech>
On Fri, 24 Apr 2020 17:34:08 +0200, Maxime Ripard wrote:
> The BCM283x SoCs have a display pipeline composed of several controllers
> with device tree bindings that are supported by Linux.
>
> Now that we have the DT validation in place, let's split into separate
> files and convert the device tree bindings for those controllers to
> schemas.
>
> This is just a 1:1 conversion though, and some bindings were incomplete so
> it results in example validation warnings that are going to be addressed in
> the following patches.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +------------------------------------------------------------------------
> Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 66 +++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 73 ++++++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 75 +++++++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 37 +++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 40 +++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 +++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 +++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 34 ++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++++++++++++++++++-
> MAINTAINERS | 2 +-
> 11 files changed, 449 insertions(+), 175 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml: properties: '#clock-cells' is a dependency of 'clock-output-names'
Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1276439
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
next prev parent reply other threads:[~2020-04-27 21:32 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 15:33 [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 03/91] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-05-11 21:47 ` Rob Herring
2020-05-13 8:13 ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 24/91] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 25/91] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-05-27 7:06 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-04-27 21:32 ` Rob Herring [this message]
2020-04-24 15:34 ` [PATCH v2 28/91] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 29/91] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 30/91] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 31/91] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 59/91] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 90/91] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-11 21:50 ` Rob Herring
2020-05-13 8:16 ` Maxime Ripard
2020-04-27 7:23 ` [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin Jian-Hong Pan
2020-04-28 16:21 ` Maxime Ripard
2020-05-04 6:35 ` Jian-Hong Pan
2020-05-07 17:21 ` Maxime Ripard
2020-05-08 6:20 ` Jian-Hong Pan
2020-05-11 3:12 ` Jian-Hong Pan
2020-05-25 11:11 ` Maxime Ripard
2020-05-26 10:20 ` Maxime Ripard
2020-05-27 3:49 ` Daniel Drake
2020-05-27 9:13 ` Maxime Ripard
2020-05-27 9:15 ` Daniel Drake
2020-05-28 7:30 ` Maxime Ripard
2020-06-01 7:58 ` Jian-Hong Pan
2020-06-02 11:04 ` Maxime Ripard
2020-06-05 8:44 ` Jian-Hong Pan
2020-06-29 14:21 ` Maxime Ripard
2020-06-30 8:26 ` Jian-Hong Pan
2020-07-03 12:56 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200427213200.GA30618@bogus \
--to=robh@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maxime@cerno.tech \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).