devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Marco Felsch <m.felsch@pengutronix.de>,
	Maxime Ripard <maxime@cerno.tech>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Dongchun Zhu <dongchun.zhu@mediatek.com>,
	Fabio Estevam <festevam@gmail.com>,
	Tomasz Figa <tfiga@chromium.org>,
	Robert Foss <robert.foss@linaro.org>
Subject: [PATCH v6 3/3] media: ov8856: Implement sensor module revision identification
Date: Wed, 29 Apr 2020 18:24:37 +0200	[thread overview]
Message-ID: <20200429162437.2025699-4-robert.foss@linaro.org> (raw)
In-Reply-To: <20200429162437.2025699-1-robert.foss@linaro.org>

Query the sensor for its module revision, and compare it
to known revisions.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---

- Changes since v3:
  * Actually add module revision 2A

- Changes since v2:
  * Add module revision 2A
  * Sakari: Remove ov8856_check_revision()
  * Sakari: Stop EEPROM streaming mode

 drivers/media/i2c/ov8856.c | 53 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 4749dc74d5ad..3f4000aef2ab 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -32,6 +32,19 @@
 #define OV8856_MODE_STANDBY		0x00
 #define OV8856_MODE_STREAMING		0x01
 
+/* module revisions */
+#define OV8856_2A_MODULE		0x01
+#define OV8856_1B_MODULE		0x02
+
+/* the OTP read-out buffer is at 0x7000 and 0xf is the offset
+ * of the byte in the OTP that means the module revision
+ */
+#define OV8856_MODULE_REVISION		0x700f
+#define OV8856_OTP_MODE_CTRL		0x3d84
+#define OV8856_OTP_LOAD_CTRL		0x3d81
+#define OV8856_OTP_MODE_AUTO		0x00
+#define OV8856_OTP_LOAD_CTRL_ENABLE	BIT(0)
+
 /* vertical-timings from sensor */
 #define OV8856_REG_VTS			0x380e
 #define OV8856_VTS_MAX			0x7fff
@@ -1152,6 +1165,46 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
 		return -ENXIO;
 	}
 
+	ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
+			       OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
+	if (ret)
+		return ret;
+
+	ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
+			       OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
+	if (ret) {
+		dev_err(&client->dev, "failed to set otp mode");
+		return ret;
+	}
+
+	ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL,
+			       OV8856_REG_VALUE_08BIT,
+			       OV8856_OTP_LOAD_CTRL_ENABLE);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable load control");
+		return ret;
+	}
+
+	ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION,
+			      OV8856_REG_VALUE_08BIT, &val);
+	if (ret) {
+		dev_err(&client->dev, "failed to read module revision");
+		return ret;
+	}
+
+	dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n",
+		val,
+		val == OV8856_2A_MODULE ? "2A" :
+		val == OV8856_1B_MODULE ? "1B" : "unknown revision",
+		client->addr);
+
+	ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
+			       OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY);
+	if (ret) {
+		dev_err(&client->dev, "failed to exit streaming mode");
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.25.1


      parent reply	other threads:[~2020-04-29 16:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-29 16:24 [PATCH v6 v6 0/3] media: ov8856: Add devicetree support Robert Foss
2020-04-29 16:24 ` [PATCH v9 1/3] media: dt-bindings: ov8856: Document YAML bindings Robert Foss
2020-04-29 16:24 ` [PATCH v6 2/3] media: ov8856: Add devicetree support Robert Foss
2020-04-30  9:35   ` Marco Felsch
2020-04-30  9:45     ` Sakari Ailus
2020-04-30  9:53       ` Marco Felsch
2020-04-30  9:59         ` Sakari Ailus
2020-04-30 10:11           ` Marco Felsch
2020-04-30 10:20             ` Sakari Ailus
2020-04-30 12:07               ` Marco Felsch
2020-04-30 13:32                 ` Sakari Ailus
2020-04-30 16:11                 ` Robert Foss
2020-05-04  6:24                   ` Marco Felsch
2020-04-29 16:24 ` Robert Foss [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200429162437.2025699-4-robert.foss@linaro.org \
    --to=robert.foss@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dongchun.zhu@mediatek.com \
    --cc=festevam@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=m.felsch@pengutronix.de \
    --cc=maxime@cerno.tech \
    --cc=sakari.ailus@iki.fi \
    --cc=tfiga@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).