From: Rob Herring <robh@kernel.org>
To: Dan Murphy <dmurphy@ti.com>
Cc: sre@kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Ricardo Rivera-Matos <r-rivera-matos@ti.com>
Subject: Re: [PATCH v5 2/3] Add the bindings for the bq25150 and bq25155 500mA charging ICs from Texas Instruments.
Date: Fri, 1 May 2020 16:35:40 -0500 [thread overview]
Message-ID: <20200501213540.GA15569@bogus> (raw)
In-Reply-To: <20200501175118.26226-3-dmurphy@ti.com>
On Fri, 1 May 2020 12:51:17 -0500, Dan Murphy wrote:
> From: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
>
> Description:
> The BQ2515X family of devices are highly integrated battery management
> ICs that integrate the most common functions for wearbale devices
> namely a charger, an output voltage rail, ADC for battery and system
> monitoring, and a push-button controller.
>
> Datasheets:
> http://www.ti.com/lit/ds/symlink/bq25150.pdf
> http://www.ti.com/lit/ds/symlink/bq25155.pdf
>
> CC: Rob Herring <robh@kernel.org>
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
> ---
> .../bindings/power/supply/bq2515x.yaml | 99 +++++++++++++++++++
> 1 file changed, 99 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/power/supply/bq2515x.yaml: while scanning a block scalar
in "<unicode string>", line 81, column 5
found a tab character where an indentation space is expected
in "<unicode string>", line 96, column 1
Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/power/supply/bq2515x.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/power/supply/bq2515x.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq2515x.yaml: ignoring, error parsing file
warning: no schema found in file: Documentation/devicetree/bindings/power/supply/bq2515x.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq2515x.yaml: ignoring, error parsing file
warning: no schema found in file: Documentation/devicetree/bindings/power/supply/bq2515x.yaml
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1281414
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
next prev parent reply other threads:[~2020-05-01 21:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-01 17:51 [PATCH v5 0/3] BQ25150/155 Batter charger Dan Murphy
2020-05-01 17:51 ` [PATCH v5 1/3] power_supply: Add additional health properties to the header Dan Murphy
2020-05-03 0:30 ` Sebastian Reichel
2020-05-01 17:51 ` [PATCH v5 2/3] Add the bindings for the bq25150 and bq25155 500mA charging ICs from Texas Instruments Dan Murphy
2020-05-01 21:35 ` Rob Herring [this message]
2020-05-03 0:40 ` Sebastian Reichel
2020-05-01 17:51 ` [PATCH v5 3/3] power: supply: bq25150 introduce the bq25150 Dan Murphy
2020-05-03 1:16 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200501213540.GA15569@bogus \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=r-rivera-matos@ti.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).