[PATCH v2] arm64: dts: rockchip: fix phy nodename for rk3328

[Johan Jonker <jbx6244@gmail.com>]

A test with the command below gives for example this error:

arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changes v2:
  Reword commit message in the same way as in the patches for
  'rk3228-evb.dts' and 'rk3229-xms6.dts'
  that are already aproved.

  Patch 2-6 of version 1 unchanged.
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 931a9279e..fdf0e1b26 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -935,7 +935,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy: phy@0 {
+			phy: ethernet-phy@0 {
 				compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
 				reg = <0>;
 				clocks = <&cru SCLK_MAC2PHY_OUT>;
-- 
2.11.0