RE: [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile

Yoshihiro Shimoda
2020-05-11T11:09:06Z

Hi Al,

> From: Al Cooper, Sent: Saturday, May 9, 2020 6:19 AM
>
> Some BRCMSTB USB chips have an XHCI, EHCI and OHCI controller
> on the same port where XHCI handles 3.0 devices, EHCI handles 2.0
> devices and OHCI handles <2.0 devices. Currently the Makefile
> has XHCI linking at the bottom which will result in the XHIC driver
> initalizing after the EHCI and OHCI drivers and any installed 3.0
> device will be seen as a 2.0 device. Moving the XHCI linking
> above the EHCI and OHCI linking fixes the issue.
>
> Signed-off-by: Al Cooper <alcooperx@gmail.com>

I tested on my environment (r8a77951 and r8a77961) and then
I didn't detect any regression. So,

Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Best regards,
Yoshihiro Shimoda