Re: [PATCH 2/2] drm/panel: simple: Add Innolux N133HSE panel support

[Sam Ravnborg <sam@ravnborg.org>]

Hi Richard.

On Sat, May 09, 2020 at 01:18:34PM +0200, srk@48.io wrote:
> From: Sean Cross <xobs@kosagi.com>
> 
> The Innolux N133HSE panel is a 13.3" 1920x1080 panel that contains an
> integrated backlight, and connects via eDP.
> 
> It is used in the Kosagi Novena.

Thanks for the patch.


> 
> Signed-off-by: Sean Cross <xobs@kosagi.com>
> Signed-off-by: Richard Marko <srk@48.io>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> To: dri-devel@lists.freedesktop.org
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 3ad828eaefe1..c8a93771d398 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1906,6 +1906,30 @@ static const struct panel_desc innolux_n116bge = {
>  	},
>  };
>  
> +static const struct drm_display_mode innolux_n133hse_ea1_mode = {
> +	.clock = 138500,
> +	.hdisplay = 1920,
> +	.hsync_start = 1920 + 46,
> +	.hsync_end = 1920 + 46 + 30,
> +	.htotal = 1920 + 46 + 30 + 84,
> +	.vdisplay = 1080,
> +	.vsync_start = 1080 + 2,
> +	.vsync_end = 1080 + 2 + 4,
> +	.vtotal = 1080 + 2 + 4 + 26,
> +	.vrefresh = 60,
> +};
> +
> +static const struct panel_desc innolux_n133hse_ea1 = {
> +	.modes = &innolux_n133hse_ea1_mode,
> +	.num_modes = 1,
> +	.bpc = 8,
> +	.size = {
> +		.width = 293,
> +		.height = 165,
> +	},
> +	.connector_type = DRM_MODE_CONNECTOR_eDP,
Please include .bus_format and .bus_flags info too.

We are relying more and more on this type of info so we need it to be
present.

	Sam



> +};
> +
>  static const struct drm_display_mode innolux_n156bge_l21_mode = {
>  	.clock = 69300,
>  	.hdisplay = 1366,
> @@ -3577,6 +3601,9 @@ static const struct of_device_id platform_of_match[] = {
>  	}, {
>  		.compatible = "innolux,n116bge",
>  		.data = &innolux_n116bge,
> +	}, {
> +		.compatible = "innolux,n133hse-ea1",
> +		.data = &innolux_n133hse_ea1,
>  	}, {
>  		.compatible = "innolux,n156bge-l21",
>  		.data = &innolux_n156bge_l21,
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel