* [PATCH] arm64: dts: lx2160a: add more thermal zone support
@ 2020-04-17 6:16 Yuantian Tang
2020-05-07 6:20 ` Andy Tang
2020-05-11 14:29 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Yuantian Tang @ 2020-04-17 6:16 UTC (permalink / raw)
To: shawnguo, robh+dt, mark.rutland, catalin.marinas, will.deacon
Cc: devicetree, linux-arm-kernel, linux-kernel, Yuantian Tang
There are 7 thermal zones in lx2160a soc. Add the
rest thermal zone node to enable them.
Also correct one of the values for tmu-calibration property.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
1 file changed, 125 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ae1b113ab162..abaeb587de48 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -436,19 +436,19 @@
};
thermal-zones {
- core_thermal1: core-thermal1 {
+ cluster6-7 {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
- core_cluster_alert: core-cluster-alert {
+ cluster6_7_alert: cluster6-7-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- core_cluster_crit: core-cluster-crit {
+ cluster6_7_crit: cluster6-7-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -457,7 +457,7 @@
cooling-maps {
map0 {
- trip = <&core_cluster_alert>;
+ trip = <&cluster6_7_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -478,6 +478,126 @@
};
};
};
+
+ ddr-cluster5 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ ddr-cluster5-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ddr-cluster5-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wriop {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ wriop-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ wriop-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ dce-qbman-hsio2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ dce-qbman-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ dce-qbman-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ccn-dpaa-tbu {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ ccn-dpaa-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ccn-dpaa-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster4-hsio3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 5>;
+
+ trips {
+ clust4-hsio3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ clust4-hsio3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster2-3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 6>;
+
+ trips {
+ cluster2-3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster2-3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
};
soc {
@@ -549,7 +669,7 @@
/* Calibration data group 1 */
<0x00000000 0x00000035
/* Calibration data group 2 */
- 0x00010001 0x00000154>;
+ 0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* RE: [PATCH] arm64: dts: lx2160a: add more thermal zone support
2020-04-17 6:16 [PATCH] arm64: dts: lx2160a: add more thermal zone support Yuantian Tang
@ 2020-05-07 6:20 ` Andy Tang
2020-05-11 14:29 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Andy Tang @ 2020-05-07 6:20 UTC (permalink / raw)
To: Andy Tang, shawnguo@kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, catalin.marinas@arm.com,
will.deacon@arm.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
PING.
BR,
Andy
> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2020年4月17日 14:16
> To: shawnguo@kernel.org; robh+dt@kernel.org; mark.rutland@arm.com;
> catalin.marinas@arm.com; will.deacon@arm.com
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; Andy Tang <andy.tang@nxp.com>
> Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support
>
> There are 7 thermal zones in lx2160a soc. Add the rest thermal zone node to
> enable them.
> Also correct one of the values for tmu-calibration property.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
> 1 file changed, 125 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index ae1b113ab162..abaeb587de48 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -436,19 +436,19 @@
> };
>
> thermal-zones {
> - core_thermal1: core-thermal1 {
> + cluster6-7 {
> polling-delay-passive = <1000>;
> polling-delay = <5000>;
> thermal-sensors = <&tmu 0>;
>
> trips {
> - core_cluster_alert: core-cluster-alert {
> + cluster6_7_alert: cluster6-7-alert {
> temperature = <85000>;
> hysteresis = <2000>;
> type = "passive";
> };
>
> - core_cluster_crit: core-cluster-crit {
> + cluster6_7_crit: cluster6-7-crit {
> temperature = <95000>;
> hysteresis = <2000>;
> type = "critical";
> @@ -457,7 +457,7 @@
>
> cooling-maps {
> map0 {
> - trip = <&core_cluster_alert>;
> + trip = <&cluster6_7_alert>;
> cooling-device =
> <&cpu0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> <&cpu1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>, @@ -478,6 +478,126 @@
> };
> };
> };
> +
> + ddr-cluster5 {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 1>;
> +
> + trips {
> + ddr-cluster5-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + ddr-cluster5-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + wriop {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 2>;
> +
> + trips {
> + wriop-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + wriop-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + dce-qbman-hsio2 {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 3>;
> +
> + trips {
> + dce-qbman-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + dce-qbman-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + ccn-dpaa-tbu {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 4>;
> +
> + trips {
> + ccn-dpaa-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + ccn-dpaa-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cluster4-hsio3 {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 5>;
> +
> + trips {
> + clust4-hsio3-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + clust4-hsio3-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + cluster2-3 {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 6>;
> +
> + trips {
> + cluster2-3-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cluster2-3-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> };
>
> soc {
> @@ -549,7 +669,7 @@
> /* Calibration data group 1 */
> <0x00000000 0x00000035
> /* Calibration data group 2 */
> - 0x00010001 0x00000154>;
> + 0x00000001 0x00000154>;
> little-endian;
> #thermal-sensor-cells = <1>;
> };
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] arm64: dts: lx2160a: add more thermal zone support
2020-04-17 6:16 [PATCH] arm64: dts: lx2160a: add more thermal zone support Yuantian Tang
2020-05-07 6:20 ` Andy Tang
@ 2020-05-11 14:29 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2020-05-11 14:29 UTC (permalink / raw)
To: Yuantian Tang
Cc: robh+dt, mark.rutland, catalin.marinas, will.deacon, devicetree,
linux-arm-kernel, linux-kernel
On Fri, Apr 17, 2020 at 02:16:18PM +0800, Yuantian Tang wrote:
> There are 7 thermal zones in lx2160a soc. Add the
> rest thermal zone node to enable them.
> Also correct one of the values for tmu-calibration property.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-05-11 14:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-17 6:16 [PATCH] arm64: dts: lx2160a: add more thermal zone support Yuantian Tang
2020-05-07 6:20 ` Andy Tang
2020-05-11 14:29 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).