* [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding [not found] <cover.1588747998.git.xji@analogixsemi.com> @ 2020-05-06 7:04 ` Xin Ji 2020-05-14 14:54 ` Rob Herring 0 siblings, 1 reply; 2+ messages in thread From: Xin Ji @ 2020-05-06 7:04 UTC (permalink / raw) To: devicetree, devel, Laurent Pinchart, Andrzej Hajda, Nicolas Boichat, Sam Ravnborg Cc: Neil Armstrong, Jonas Karlman, Jernej Skrabec, David Airlie, Daniel Vetter, Dan Carpenter, Nicolas Boichat, linux-kernel, dri-devel, Pi-Hsun Shih, Sheng Pan The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed for portable device. It converts MIPI to DisplayPort 1.3 4K. You can add support to your board with binding. Example: anx7625_bridge: encoder@58 { compatible = "analogix,anx7625"; reg = <0x58>; status = "okay"; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; mipi2dp_bridge_in: port@0 { reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; }; }; mipi2dp_bridge_out: port@1 { reg = <1>; anx7625_out: endpoint { remote-endpoint = <&panel_in>; }; }; }; }; Signed-off-by: Xin Ji <xji@analogixsemi.com> --- .../bindings/display/bridge/analogix,anx7625.yaml | 98 ++++++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml new file mode 100644 index 0000000..6e54176 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analogix Semiconductor, Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) + +maintainers: + - Xin Ji <xji@analogixsemi.com> + +description: | + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter + designed for portable devices. + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + items: + - const: analogix,anx7625 + + reg: + maxItems: 1 + + interrupts: + description: used for interrupt pin B8. + maxItems: 1 + + enable-gpios: + description: used for power on chip control, POWER_EN pin D2. + maxItems: 1 + + reset-gpios: + description: used for reset chip control, RESET_N pin B7. + maxItems: 1 + + ports: + type: object + + properties: + port@0: + type: object + description: + Video port for MIPI DSI input. + + port@1: + type: object + description: + Video port for panel or connector. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + anx7625_bridge: encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi2dp_bridge_in: port@0 { + reg = <0>; + anx7625_in: endpoint { + remote-endpoint = <&mipi_dsi>; + }; + }; + + mipi2dp_bridge_out: port@1 { + reg = <1>; + anx7625_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding 2020-05-06 7:04 ` [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji @ 2020-05-14 14:54 ` Rob Herring 0 siblings, 0 replies; 2+ messages in thread From: Rob Herring @ 2020-05-14 14:54 UTC (permalink / raw) To: Xin Ji Cc: devicetree, devel, Laurent Pinchart, Andrzej Hajda, Nicolas Boichat, Sam Ravnborg, Neil Armstrong, Jonas Karlman, Jernej Skrabec, David Airlie, Daniel Vetter, Dan Carpenter, Nicolas Boichat, linux-kernel, dri-devel, Pi-Hsun Shih, Sheng Pan On Wed, May 06, 2020 at 03:04:20PM +0800, Xin Ji wrote: > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed > for portable device. It converts MIPI to DisplayPort 1.3 4K. > > You can add support to your board with binding. We have an example in the binding, no reason to also put in the commit msg. > > Example: > anx7625_bridge: encoder@58 { > compatible = "analogix,anx7625"; > reg = <0x58>; > status = "okay"; > enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; > reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; > > ports { > #address-cells = <1>; > #size-cells = <0>; > > mipi2dp_bridge_in: port@0 { > reg = <0>; > anx7625_in: endpoint { > remote-endpoint = <&mipi_dsi>; > }; > }; > > mipi2dp_bridge_out: port@1 { > reg = <1>; > anx7625_out: endpoint { > remote-endpoint = <&panel_in>; > }; > }; > }; > }; > > Signed-off-by: Xin Ji <xji@analogixsemi.com> > --- > .../bindings/display/bridge/analogix,anx7625.yaml | 98 ++++++++++++++++++++++ > 1 file changed, 98 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > new file mode 100644 > index 0000000..6e54176 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 Analogix Semiconductor, Inc. > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) > + > +maintainers: > + - Xin Ji <xji@analogixsemi.com> > + > +description: | > + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > + designed for portable devices. > + > +properties: > + "#address-cells": true > + "#size-cells": true These don't belong here. > + > + compatible: > + items: > + - const: analogix,anx7625 > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: used for interrupt pin B8. > + maxItems: 1 > + > + enable-gpios: > + description: used for power on chip control, POWER_EN pin D2. > + maxItems: 1 > + > + reset-gpios: > + description: used for reset chip control, RESET_N pin B7. > + maxItems: 1 > + > + ports: > + type: object > + > + properties: > + port@0: > + type: object > + description: > + Video port for MIPI DSI input. > + > + port@1: > + type: object > + description: > + Video port for panel or connector. > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + anx7625_bridge: encoder@58 { Drop any unused labels. > + compatible = "analogix,anx7625"; > + reg = <0x58>; > + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mipi2dp_bridge_in: port@0 { > + reg = <0>; > + anx7625_in: endpoint { > + remote-endpoint = <&mipi_dsi>; > + }; > + }; > + > + mipi2dp_bridge_out: port@1 { > + reg = <1>; > + anx7625_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + }; > + }; > + }; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-05-14 14:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <cover.1588747998.git.xji@analogixsemi.com>
2020-05-06 7:04 ` [PATCH v10 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding Xin Ji
2020-05-14 14:54 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).