devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Lu <roger.lu@mediatek.com>
To: Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Fan Chen <fan.chen@mediatek.com>,
	HenryC Chen <HenryC.Chen@mediatek.com>,
	YT Lee <yt.lee@mediatek.com>,
	Xiaoqing Liu <Xiaoqing.Liu@mediatek.com>,
	Charles Yang <Charles.Yang@mediatek.com>,
	Angus Lin <Angus.Lin@mediatek.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nishanth Menon <nm@ti.com>, Roger Lu <roger.lu@mediatek.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>
Subject: [PATCH v8 1/3] dt-bindings: power: avs: add mtk svs dt-bindings
Date: Mon, 18 May 2020 17:24:02 +0800	[thread overview]
Message-ID: <20200518092403.22647-2-roger.lu@mediatek.com> (raw)
In-Reply-To: <20200518092403.22647-1-roger.lu@mediatek.com>

Document the binding for enabling mtk svs on MediaTek SoC.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 .../bindings/power/avs/mtk_svs.yaml           | 141 ++++++++++++++++++
 1 file changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/avs/mtk_svs.yaml

diff --git a/Documentation/devicetree/bindings/power/avs/mtk_svs.yaml b/Documentation/devicetree/bindings/power/avs/mtk_svs.yaml
new file mode 100644
index 000000000000..77ab606814ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/avs/mtk_svs.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/mtk_svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Introduce SVS engine
+
+maintainers:
+  - Kevin Hilman <khilman@kernel.org>
+  - Nishanth Menon <nm@ti.com>
+
+description: |+
+  The SVS (Smart Voltage Scaling) engine is a piece of hardware which is
+  used to calculate optimized voltage values of several power domains,
+  e.g. CPU/GPU/CCI, according to chip process corner, temperatures,
+  and other factors. Then DVFS driver could apply those optimized voltage
+  values to reduce power consumption.
+
+properties:
+  compatible:
+    const: mediatek,mt8183-svs
+
+  reg:
+    description: Address range of the MTK SVS controller.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ for the MTK SVS controller.
+    maxItems: 1
+
+  clocks:
+    description: Main clock for svs controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: calibration-data
+
+patternProperties:
+  "^svs-(cpu-little|cpu-big|cci|gpu)$":
+    type: object
+    description:
+      Each subnode represents one SVS bank.
+        - svs-cpu-little (SVS bank device node of little CPU)
+        - svs-cpu-big (SVS bank device node of big CPU)
+        - svs-cci (SVS bank device node of CCI)
+        - svs-gpu (SVS bank device node of GPU)
+
+    properties:
+      compatible:
+       enum:
+         - mediatek,mt8183-svs-cpu-little
+         - mediatek,mt8183-svs-cpu-big
+         - mediatek,mt8183-svs-cci
+         - mediatek,mt8183-svs-gpu
+
+      power-domains:
+        description: Phandle to the associated power domain
+        maxItems: 1
+
+      operating-points-v2: true
+
+      vcpu-little-supply:
+        description: PMIC buck of little CPU
+
+      vcpu-big-supply:
+        description: PMIC buck of big CPU
+
+      vcci-supply:
+        description: PMIC buck of CCI
+
+      vgpu-spply:
+        description: PMIC buck of GPU
+
+    required:
+      - compatible
+      - operating-points-v2
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+
+    svs: svs@1100b000 {
+        compatible = "mediatek,mt8183-svs";
+        reg = <0 0x1100b000 0 0x1000>;
+        interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg CLK_INFRA_THERM>;
+        clock-names = "main";
+        nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+        nvmem-cell-names = "svs-calibration-data", "calibration-data";
+
+        svs_cpu_little: svs-cpu-little {
+            compatible = "mediatek,mt8183-svs-cpu-little";
+            operating-points-v2 = <&cluster0_opp>;
+            vcpu-little-supply = <&mt6358_vproc12_reg>;
+        };
+
+        svs_cpu_big: svs-cpu-big {
+            compatible = "mediatek,mt8183-svs-cpu-big";
+            operating-points-v2 = <&cluster1_opp>;
+            vcpu-big-supply = <&mt6358_vproc11_reg>;
+        };
+
+        svs_cci: svs-cci {
+            compatible = "mediatek,mt8183-svs-cci";
+            operating-points-v2 = <&cci_opp>;
+            vcci-supply = <&mt6358_vproc12_reg>;
+        };
+
+        svs_gpu: svs-gpu {
+            compatible = "mediatek,mt8183-svs-gpu";
+            power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
+            operating-points-v2 = <&gpu_opp_table>;
+            vgpu-spply = <&mt6358_vgpu_reg>;
+        };
+    };
-- 
2.18.0

  reply	other threads:[~2020-05-18  9:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-18  9:24 [PATCH v8 0/3] PM / AVS: SVS: Introduce SVS engine Roger Lu
2020-05-18  9:24 ` Roger Lu [this message]
2020-05-18  9:24 ` [PATCH v8 2/3] arm64: dts: mt8183: add svs device information Roger Lu
2020-05-18  9:24 ` [PATCH v8 3/3] PM / AVS: SVS: Introduce SVS engine Roger Lu
2020-05-19 15:30   ` Enric Balletbo Serra
2020-05-22  9:40     ` Roger Lu
2020-05-22 15:38       ` Matthias Brugger
2020-05-26  9:12         ` Roger Lu
2020-05-26 15:29           ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200518092403.22647-2-roger.lu@mediatek.com \
    --to=roger.lu@mediatek.com \
    --cc=Angus.Lin@mediatek.com \
    --cc=Charles.Yang@mediatek.com \
    --cc=HenryC.Chen@mediatek.com \
    --cc=Xiaoqing.Liu@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@google.com \
    --cc=fan.chen@mediatek.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=yt.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).