* [PATCH AUTOSEL 5.4 02/32] ARM: dts: rockchip: fix phy nodename for rk3229-xms6
2020-05-22 14:50 [PATCH AUTOSEL 5.4 01/32] ARM: dts: rockchip: fix phy nodename for rk3228-evb Sasha Levin
@ 2020-05-22 14:50 ` Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 03/32] arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts Sasha Levin
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-05-22 14:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
linux-rockchip, devicetree
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 621c8d0c233e260232278a4cfd3380caa3c1da29 ]
A test with the command below gives for example this error:
arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200416170321.4216-2-jbx6244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/rk3229-xms6.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 679fc2b00e5a..933ef69da32a 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -150,7 +150,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.4 03/32] arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts
2020-05-22 14:50 [PATCH AUTOSEL 5.4 01/32] ARM: dts: rockchip: fix phy nodename for rk3228-evb Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 02/32] ARM: dts: rockchip: fix phy nodename for rk3229-xms6 Sasha Levin
@ 2020-05-22 14:50 ` Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 04/32] arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node Sasha Levin
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-05-22 14:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, devicetree,
linux-arm-kernel, linux-rockchip
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit c617ed88502d0b05149e7f32f3b3fd8a0663f7e2 ]
The status was removed of the '&gmac2phy' node with the apply
of a patch long time ago, so fix status for '&gmac2phy'
in 'rk3328-evb.dts'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425122345.12902-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 6abc6f4a86cf..05265b38cc02 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -86,7 +86,7 @@
assigned-clock-rate = <50000000>;
assigned-clocks = <&cru SCLK_MAC2PHY>;
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+ status = "okay";
};
&i2c1 {
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.4 04/32] arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node
2020-05-22 14:50 [PATCH AUTOSEL 5.4 01/32] ARM: dts: rockchip: fix phy nodename for rk3228-evb Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 02/32] ARM: dts: rockchip: fix phy nodename for rk3229-xms6 Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 03/32] arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts Sasha Levin
@ 2020-05-22 14:50 ` Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 05/32] ARM: dts: rockchip: swap clock-names of gpu nodes Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 06/32] ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi Sasha Levin
4 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-05-22 14:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, devicetree,
linux-arm-kernel, linux-rockchip
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ]
Dts files with Rockchip rk3399 'gpu' nodes were manually verified.
In order to automate this process arm,mali-midgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-midgard.yaml expects interrupts and interrupt-names values
in the same order. Fix this for rk3399.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-midgard.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425143837.18706-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index cd97016b7c18..c5d8d1c58291 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@
gpu: gpu@ff9a0000 {
compatible = "rockchip,rk3399-mali", "arm,mali-t860";
reg = <0x0 0xff9a0000 0x0 0x10000>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "gpu", "job", "mmu";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.4 05/32] ARM: dts: rockchip: swap clock-names of gpu nodes
2020-05-22 14:50 [PATCH AUTOSEL 5.4 01/32] ARM: dts: rockchip: fix phy nodename for rk3228-evb Sasha Levin
` (2 preceding siblings ...)
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 04/32] arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node Sasha Levin
@ 2020-05-22 14:50 ` Sasha Levin
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 06/32] ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi Sasha Levin
4 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-05-22 14:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
linux-rockchip, devicetree
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ]
Dts files with Rockchip 'gpu' nodes were manually verified.
In order to automate this process arm,mali-utgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/rk3036.dtsi | 2 +-
arch/arm/boot/dts/rk322x.dtsi | 2 +-
arch/arm/boot/dts/rk3xxx.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index c776321b2cc4..d282a7b638d8 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -128,7 +128,7 @@
assigned-clocks = <&cru SCLK_GPU>;
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
resets = <&cru SRST_GPU>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 340ed6ccb08f..c60784f3aa75 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -561,7 +561,7 @@
"pp1",
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 97307a405e60..bce0b05ef7bf 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -84,7 +84,7 @@
compatible = "arm,mali-400";
reg = <0x10090000 0x10000>;
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
assigned-clocks = <&cru ACLK_GPU>;
assigned-clock-rates = <100000000>;
resets = <&cru SRST_GPU>;
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.4 06/32] ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
2020-05-22 14:50 [PATCH AUTOSEL 5.4 01/32] ARM: dts: rockchip: fix phy nodename for rk3228-evb Sasha Levin
` (3 preceding siblings ...)
2020-05-22 14:50 ` [PATCH AUTOSEL 5.4 05/32] ARM: dts: rockchip: swap clock-names of gpu nodes Sasha Levin
@ 2020-05-22 14:50 ` Sasha Levin
4 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-05-22 14:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Johan Jonker, Heiko Stuebner, Sasha Levin, linux-arm-kernel,
linux-rockchip, devicetree
From: Johan Jonker <jbx6244@gmail.com>
[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]
A test with the command below gives these errors:
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property
The $nodename pattern for spi nodes is
"^spi(@.*|-[0-9a-f])*$". To prevent warnings rename
'spi-0' and 'spi-1' pinctrl sub nodenames to
'spi0' and 'spi1' in 'rk322x.dtsi'.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/rk322x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index c60784f3aa75..6bb78b19c555 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -1033,7 +1033,7 @@
};
};
- spi-0 {
+ spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
};
@@ -1051,7 +1051,7 @@
};
};
- spi-1 {
+ spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread