From: Boris Brezillon <boris.brezillon@collabora.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
<linux-mtd@lists.infradead.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, <devicetree@vger.kernel.org>
Subject: Re: [RESEND v5 09/21] mtd: rawnand: Create a new enumeration to describe properly ECC types
Date: Wed, 27 May 2020 00:59:28 +0200 [thread overview]
Message-ID: <20200527005928.39c549e2@collabora.com> (raw)
In-Reply-To: <20200526195633.11543-10-miquel.raynal@bootlin.com>
On Tue, 26 May 2020 21:56:21 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> Now that the misleading mix between ECC engine type and OOB placement
> has been addressed, add a new enumeration to properly define ECC types
> (also called provider or mode).
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
> drivers/mtd/nand/raw/nand_base.c | 7 +++++++
> include/linux/mtd/rawnand.h | 16 ++++++++++++++++
> 2 files changed, 23 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 515cd4681660..5c6ab5b93270 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5018,6 +5018,13 @@ static const char * const nand_ecc_modes[] = {
> [NAND_ECC_ON_DIE] = "on-die",
> };
>
> +static const char * const nand_ecc_engine_providers[] = {
This table is not used here, are you sure it should be introduced now?
> + [NAND_ECC_ENGINE_NONE] = "none",
> + [NAND_ECC_ENGINE_SOFT] = "soft",
> + [NAND_ECC_ENGINE_CONTROLLER] = "hw",
^ "on-controller" ?
> + [NAND_ECC_ENGINE_ON_DIE] = "on-die",
> +};
> +
> static const char * const nand_ecc_placement[] = {
> [NAND_ECC_PLACEMENT_INTERLEAVED] = "interleaved",
> };
> diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
> index dc909fb977c7..a2078c5f3d21 100644
> --- a/include/linux/mtd/rawnand.h
> +++ b/include/linux/mtd/rawnand.h
> @@ -92,6 +92,22 @@ enum nand_ecc_mode {
> NAND_ECC_ON_DIE,
> };
>
> +/**
> + * enum nand_ecc_engine_type - NAND ECC engine type/provider
> + * @NAND_ECC_ENGINE_INVALID: Invalid value
> + * @NAND_ECC_ENGINE_NONE: No ECC correction
> + * @NAND_ECC_ENGINE_SOFT: Software ECC correction
> + * @NAND_ECC_ENGINE_CONTROLLER: Hardware controller ECC correction
> + * @NAND_ECC_ENGINE_ON_DIE: On chip hardware ECC correction
> + */
> +enum nand_ecc_engine_type {
> + NAND_ECC_ENGINE_INVALID,
> + NAND_ECC_ENGINE_NONE,
> + NAND_ECC_ENGINE_SOFT,
> + NAND_ECC_ENGINE_CONTROLLER,
> + NAND_ECC_ENGINE_ON_DIE,
> +};
> +
> /**
> * enum nand_ecc_placement - NAND ECC placement
> * @NAND_ECC_PLACEMENT_FREE: The driver can decide where to put ECC bytes.
next prev parent reply other threads:[~2020-05-26 22:59 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-26 19:56 [RESEND v5 00/21] Introduce the generic ECC engine abstraction Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 01/21] mtd: Fix typo in mtd_ooblayout_set_databytes() description Miquel Raynal
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 02/21] mtd: rawnand: Avoid a typedef Miquel Raynal
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 03/21] mtd: rawnand: Drop OOB_FIRST placement scheme Miquel Raynal
2020-05-26 22:46 ` Boris Brezillon
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 04/21] dt-bindings: mtd: Deprecate OOB_FIRST mode Miquel Raynal
2020-05-26 22:42 ` Boris Brezillon
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 05/21] mtd: rawnand: Return an enum from of_get_nand_ecc_algo() Miquel Raynal
2020-05-26 22:41 ` Boris Brezillon
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 06/21] mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones Miquel Raynal
2020-05-27 14:11 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 07/21] mtd: rawnand: Create a new enumeration to describe OOB placement Miquel Raynal
2020-05-26 22:39 ` Boris Brezillon
2020-05-27 8:00 ` Miquel Raynal
2020-05-27 8:22 ` Boris Brezillon
2020-05-26 19:56 ` [RESEND v5 08/21] mtd: rawnand: Separate the ECC engine type and the " Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 09/21] mtd: rawnand: Create a new enumeration to describe properly ECC types Miquel Raynal
2020-05-26 22:55 ` Boris Brezillon
2020-05-26 23:21 ` Boris Brezillon
2020-05-27 8:21 ` Miquel Raynal
2020-05-26 22:59 ` Boris Brezillon [this message]
2020-05-27 8:33 ` Miquel Raynal
2020-05-27 8:44 ` Boris Brezillon
2020-05-27 8:50 ` Boris Brezillon
2020-05-26 19:56 ` [RESEND v5 10/21] mtd: rawnand: Create a helper to retrieve the ECC placement Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 11/21] mtd: rawnand: Use the new ECC engine type enumeration Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 12/21] mtd: rawnand: Deprecate nand-ecc-mode in favor of nand-ecc-provider Miquel Raynal
2020-05-26 23:03 ` Boris Brezillon
2020-05-27 8:42 ` Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 13/21] mtd: rawnand: Drop the legacy ECC type enumeration Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 14/21] dt-bindings: mtd: Add the nand-ecc-placement property Miquel Raynal
2020-05-26 23:08 ` Boris Brezillon
2020-05-26 23:10 ` Rob Herring
2020-05-26 19:56 ` [RESEND v5 15/21] dt-bindings: mtd: Deprecate hw_syndrome from the ECC modes Miquel Raynal
2020-05-26 23:09 ` Boris Brezillon
2020-05-26 19:56 ` [RESEND v5 16/21] dt-bindings: mtd: Deprecate the nand-ecc-mode property Miquel Raynal
2020-05-26 23:12 ` Boris Brezillon
2020-05-26 19:56 ` [RESEND v5 17/21] mtd: nand: Move nand_device forward declaration to the top Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 18/21] mtd: nand: Add an extra level in the Kconfig hierarchy Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 19/21] mtd: nand: Drop useless 'depends on' in Kconfig Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 20/21] mtd: nand: Add a NAND page I/O request type Miquel Raynal
2020-05-26 19:56 ` [RESEND v5 21/21] mtd: nand: Rename a core structure Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527005928.39c549e2@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).