From: Rob Herring <robh@kernel.org>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>,
dri-devel@lists.freedesktop.org,
linux-rpi-kernel@lists.infradead.org,
bcm-kernel-feedback-list@broadcom.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas
Date: Wed, 27 May 2020 13:12:11 -0600 [thread overview]
Message-ID: <20200527191211.GA2559189@bogus> (raw)
In-Reply-To: <2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech>
On Wed, May 27, 2020 at 05:47:36PM +0200, Maxime Ripard wrote:
> The BCM283x SoCs have a display pipeline composed of several controllers
> with device tree bindings that are supported by Linux.
>
> Now that we have the DT validation in place, let's split into separate
> files and convert the device tree bindings for those controllers to
> schemas.
>
> This is just a 1:1 conversion though, and some bindings were incomplete so
> it results in example validation warnings that are going to be addressed in
> the following patches.
>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +------------------------------------------------------------------------
> Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 66 +++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 73 ++++++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 75 +++++++++++++++++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 37 +++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 40 +++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 +++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 +++++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 34 ++++++++++++++-
> Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++++++++++++++++++-
> MAINTAINERS | 2 +-
> 11 files changed, 449 insertions(+), 175 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
> create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
> new file mode 100644
> index 000000000000..3887675f844e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom VC4 (VideoCore4) DSI Controller
> +
> +maintainers:
> + - Eric Anholt <eric@anholt.net>
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,bcm2835-dsi0
> + - brcm,bcm2835-dsi1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: The DSI PLL clock feeding the DSI analog PHY
> + - description: The DSI ESC clock
> + - description: The DSI pixel clock
> +
> + clock-output-names: true
> + # FIXME: The meta-schemas don't seem to allow it for now
> + # items:
> + # - description: The DSI byte clock for the PHY
> + # - description: The DSI DDR2 clock
> + # - description: The DSI DDR clock
Doesn't pattern work for you?
pattern: '^dsi[0-1]_byte$'
Either way,
Reviewed-by: Rob Herring <robh@kernel.org>
next prev parent reply other threads:[~2020-05-27 19:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 15:47 [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 003/105] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 004/105] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-06-04 17:26 ` Nicolas Saenz Julienne
2020-06-05 17:43 ` Maxime Ripard
2020-06-05 18:11 ` Nicolas Saenz Julienne
2020-06-05 17:56 ` Eric Anholt
2020-05-27 15:47 ` [PATCH v3 006/105] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-05-27 19:12 ` Rob Herring [this message]
2020-06-02 15:00 ` Maxime Ripard
2020-06-17 20:21 ` Rob Herring
2020-05-27 15:47 ` [PATCH v3 007/105] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 008/105] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 009/105] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-05-27 15:47 ` [PATCH v3 010/105] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-05-27 15:48 ` [PATCH v3 058/105] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-05-27 15:49 ` [PATCH v3 104/105] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-29 18:18 ` Rob Herring
2020-06-02 15:08 ` Maxime Ripard
2020-06-08 23:01 ` Rob Herring
2020-06-02 20:12 ` [PATCH v3 000/105] drm/vc4: Support BCM2711 Display Pipeline Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527191211.GA2559189@bogus \
--to=robh@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maxime@cerno.tech \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).