devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <andrew@lunn.ch>, <f.fainelli@gmail.com>, <hkallweit1@gmail.com>,
	<davem@davemloft.net>, <robh@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next v5 2/4] net: phy: Add a helper to return the index for of the internal delay
Date: Tue, 2 Jun 2020 11:45:20 -0500	[thread overview]
Message-ID: <20200602164522.3276-3-dmurphy@ti.com> (raw)
In-Reply-To: <20200602164522.3276-1-dmurphy@ti.com>

Add a helper function that will return the index in the array for the
passed in internal delay value.  The helper requires the array, size and
delay value.

The helper will then return the index for the exact match or return the
index for the index to the closest smaller value.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/net/phy/phy_device.c | 51 ++++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |  2 ++
 2 files changed, 53 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 04946de74fa0..5d4e7520b15e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2657,6 +2657,57 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
 }
 EXPORT_SYMBOL(phy_get_pause);
 
+/**
+ * phy_get_delay_index - returns the index of the internal delay
+ * @phydev: phy_device struct
+ * @delay_values: array of delays the PHY supports
+ * @size: the size of the delay array
+ * @int_delay: the internal delay to be looked up
+ *
+ * Returns the index within the array of internal delay passed in.
+ * The array must be in ascending order.
+ * Return errno if the delay is invalid or cannot be found.
+ */
+s32 phy_get_delay_index(struct phy_device *phydev, const int *delay_values,
+			int size, int int_delay)
+{
+	int i;
+
+	if (int_delay < 0)
+		return -EINVAL;
+
+	if (size <= 0)
+		return -EINVAL;
+
+	if (int_delay < delay_values[0] || int_delay > delay_values[size - 1]) {
+		phydev_err(phydev, "Delay %d is out of range\n", int_delay);
+		return -EINVAL;
+	}
+
+	if (int_delay == delay_values[0])
+		return 0;
+
+	for (i = 1; i < size; i++) {
+		if (int_delay == delay_values[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (int_delay > delay_values[i - 1] &&
+		    int_delay < delay_values[i]) {
+			if (int_delay - delay_values[i - 1] <
+			    delay_values[i] - int_delay)
+				return i - 1;
+			else
+				return i;
+		}
+	}
+
+	phydev_err(phydev, "error finding internal delay index for %d\n",
+		   int_delay);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(phy_get_delay_index);
+
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->ack_interrupt;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..a4327e6fd356 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1430,6 +1430,8 @@ void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
 bool phy_validate_pause(struct phy_device *phydev,
 			struct ethtool_pauseparam *pp);
 void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
+int phy_get_delay_index(struct phy_device *phydev, const int *delay_values,
+			int size, int delay);
 void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv,
 		       bool *tx_pause, bool *rx_pause);
 
-- 
2.26.2


  parent reply	other threads:[~2020-06-02 16:45 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-02 16:45 [PATCH net-next v5 0/4] RGMII Internal delay common property Dan Murphy
2020-06-02 16:45 ` [PATCH net-next v5 1/4] dt-bindings: net: Add tx and rx internal delays Dan Murphy
2020-06-02 16:45 ` Dan Murphy [this message]
2020-06-02 16:45 ` [PATCH net-next v5 3/4] dt-bindings: net: Add RGMII internal delay for DP83869 Dan Murphy
2020-06-02 16:45 ` [PATCH net-next v5 4/4] net: dp83869: Add RGMII internal delay configuration Dan Murphy
2020-06-02 22:33   ` Florian Fainelli
2020-06-02 23:10     ` Dan Murphy
2020-06-02 23:13       ` Florian Fainelli
2020-06-02 23:18         ` Dan Murphy
2020-06-02 23:25           ` Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200602164522.3276-3-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).