[PATCH AUTOSEL 5.7 015/388] ARM: dts: renesas: Fix IOMMU device node names

[PATCH AUTOSEL 5.7 015/388] ARM: dts: renesas: Fix IOMMU device node names

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit ae990a1de014396ffc8d0fcc31b6888c9b0ce59a ]

Fix IOMMU device node names as "iommu@".

Fixes: bbb44da0b595 ("ARM: dts: r8a7743: Add IPMMU DT nodes")
Fixes: 0dcba3de5835 ("ARM: dts: r8a7745: Add IPMMU DT nodes")
Fixes: 350ae49b97c4 ("ARM: dts: r8a7744: Add IPMMU DT nodes")
Fixes: 70496727c082 ("ARM: shmobile: r8a7790: Add IPMMU DT nodes")
Fixes: f1951852ed17 ("ARM: shmobile: r8a7791: Add IPMMU DT nodes")
Fixes: 098cb3a601e6 ("ARM: shmobile: r8a7793: Add IPMMU nodes")
Fixes: 1cb2794f6082 ("ARM: shmobile: r8a7794: Add IPMMU DT nodes")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1587461756-13317-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7744.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------
 arch/arm/boot/dts/r8a7791.dtsi | 14 +++++++-------
 arch/arm/boot/dts/r8a7793.dtsi | 14 +++++++-------
 arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++------
 7 files changed, 44 insertions(+), 44 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index e8b340bb99bc..fff123753b85 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -338,7 +338,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index def840b8b2d3..5050ac19041d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -338,7 +338,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 7ab58d8bb740..b0d1fc24e97e 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -302,7 +302,7 @@ irqc: interrupt-controller@e61c0000 {
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e5ef9fd4284a..166d5566229d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -427,7 +427,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6e5bd86731cd..09e47cc17765 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -350,7 +350,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +360,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +369,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +379,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +388,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +398,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +407,7 @@ ipmmu_rt: mmu@ffc80000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index dadbda16161b..1b62a7e06b42 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -336,7 +336,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@ ipmmu_rt: mmu@ffc80000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 2c9e7a1ebfec..8d7f8798628a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -290,7 +290,7 @@ irqc0: interrupt-controller@e61c0000 {
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@ ipmmu_mp: mmu@ec680000 {
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@ ipmmu_mx: mmu@fe951000 {
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 018/388] ARM: dts: stm32: Add missing ethernet PHY reset on AV96

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 010ca9fe500bfe365860b50220ff80541c18f0e1 ]

Add PHY reset GPIO on AV96 ethernet PHY.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 425175f7d83c..081037b510bc 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -92,6 +92,9 @@ mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+
 		phy0: ethernet-phy@7 {
 			reg = <7>;
 		};
-- 
2.25.1

[PATCH AUTOSEL 5.7 019/388] arm64: dts: renesas: Fix IOMMU device node names

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit cf8ae446bbcbf5c48214eb7ddaa6ac6e12f4633d ]

Fix IOMMU device node names as "iommu@".

Fixes: 8f507babc617 ("arm64: dts: renesas: r8a774a1: Add IPMMU device nodes")
Fixes: 63093a8e58be ("arm64: dts: renesas: r8a774b1: Add IPMMU device nodes")
Fixes: 6c7e02178e8f ("arm64: dts: renesas: r8a774c0: Add IPMMU device nodes")
Fixes: 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes")
Fixes: e4b9a493df45 ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes")
Fixes: 389baa409617 ("arm64: dts: renesas: r8a7796: Add IPMMU device nodes")
Fixes: 55697cbb44e4 ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes")
Fixes: ce3b52a1595b ("arm64: dts: renesas: r8a77970: Add IPMMU device nodes")
Fixes: a3901e7398e1 ("arm64: dts: renesas: r8a77995: Add IPMMU device nodes")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1587461775-13369-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 18 ++++++------
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 18 ++++++------
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 18 ++++++------
 arch/arm64/boot/dts/renesas/r8a77950.dtsi | 14 +++++-----
 arch/arm64/boot/dts/renesas/r8a77951.dtsi | 34 +++++++++++------------
 arch/arm64/boot/dts/renesas/r8a77960.dtsi | 22 +++++++--------
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 20 ++++++-------
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 10 +++----
 arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 +++++------
 arch/arm64/boot/dts/renesas/r8a77990.dtsi | 20 ++++++-------
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 20 ++++++-------
 11 files changed, 105 insertions(+), 105 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 79023433a740..a603d947970e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1000,7 +1000,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1008,7 +1008,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1016,7 +1016,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1024,7 +1024,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1033,7 +1033,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1041,7 +1041,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -1049,7 +1049,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1057,7 +1057,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1065,7 +1065,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774a1";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 3137f735974b..1e51855c7cd3 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -874,7 +874,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -882,7 +882,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -890,7 +890,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -898,7 +898,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -907,7 +907,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -915,7 +915,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -923,7 +923,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -931,7 +931,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -939,7 +939,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a774b1";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 22785cbddff5..5c72a7efbb03 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -847,7 +847,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -855,7 +855,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -863,7 +863,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -871,7 +871,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -880,7 +880,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -888,7 +888,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -896,7 +896,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -904,7 +904,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -912,7 +912,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a774c0";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
index 3975eecd50c4..d716c4386ae9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi
@@ -77,7 +77,7 @@ &soc {
 	/delete-node/ dma-controller@e6460000;
 	/delete-node/ dma-controller@e6470000;
 
-	ipmmu_mp1: mmu@ec680000 {
+	ipmmu_mp1: iommu@ec680000 {
 		compatible = "renesas,ipmmu-r8a7795";
 		reg = <0 0xec680000 0 0x1000>;
 		renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -85,7 +85,7 @@ ipmmu_mp1: mmu@ec680000 {
 		#iommu-cells = <1>;
 	};
 
-	ipmmu_sy: mmu@e7730000 {
+	ipmmu_sy: iommu@e7730000 {
 		compatible = "renesas,ipmmu-r8a7795";
 		reg = <0 0xe7730000 0 0x1000>;
 		renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -93,11 +93,11 @@ ipmmu_sy: mmu@e7730000 {
 		#iommu-cells = <1>;
 	};
 
-	/delete-node/ mmu@fd950000;
-	/delete-node/ mmu@fd960000;
-	/delete-node/ mmu@fd970000;
-	/delete-node/ mmu@febe0000;
-	/delete-node/ mmu@fe980000;
+	/delete-node/ iommu@fd950000;
+	/delete-node/ iommu@fd960000;
+	/delete-node/ iommu@fd970000;
+	/delete-node/ iommu@febe0000;
+	/delete-node/ iommu@fe980000;
 
 	xhci1: usb@ee040000 {
 		compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 52229546454c..61d67d9714ab 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1073,7 +1073,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1081,7 +1081,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1089,7 +1089,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1097,7 +1097,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1105,7 +1105,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1114,7 +1114,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp0: mmu@ec670000 {
+		ipmmu_mp0: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1122,7 +1122,7 @@ ipmmu_mp0: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1130,7 +1130,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1138,7 +1138,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv2: mmu@fd960000 {
+		ipmmu_pv2: iommu@fd960000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd960000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1146,7 +1146,7 @@ ipmmu_pv2: mmu@fd960000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv3: mmu@fd970000 {
+		ipmmu_pv3: iommu@fd970000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfd970000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
@@ -1154,7 +1154,7 @@ ipmmu_pv3: mmu@fd970000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1162,7 +1162,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1170,7 +1170,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc1: mmu@fe6f0000 {
+		ipmmu_vc1: iommu@fe6f0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe6f0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 13>;
@@ -1178,7 +1178,7 @@ ipmmu_vc1: mmu@fe6f0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1186,7 +1186,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi1: mmu@febe0000 {
+		ipmmu_vi1: iommu@febe0000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfebe0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 15>;
@@ -1194,7 +1194,7 @@ ipmmu_vi1: mmu@febe0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
@@ -1202,7 +1202,7 @@ ipmmu_vp0: mmu@fe990000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp1: mmu@fe980000 {
+		ipmmu_vp1: iommu@fe980000 {
 			compatible = "renesas,ipmmu-r8a7795";
 			reg = <0 0xfe980000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 17>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 31282367d3ac..33bf62acffbb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -997,7 +997,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1005,7 +1005,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -1013,7 +1013,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -1021,7 +1021,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1029,7 +1029,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1038,7 +1038,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1046,7 +1046,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 5>;
@@ -1054,7 +1054,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv1: mmu@fd950000 {
+		ipmmu_pv1: iommu@fd950000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfd950000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -1062,7 +1062,7 @@ ipmmu_pv1: mmu@fd950000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1070,7 +1070,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
@@ -1078,7 +1078,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a7796";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index d82dd4e67b62..6f7ab39fd282 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -867,7 +867,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -875,7 +875,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -883,7 +883,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -891,7 +891,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -900,7 +900,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -908,7 +908,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -916,7 +916,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -924,7 +924,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -932,7 +932,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -940,7 +940,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77965";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index a009c0ebc8b4..bd95ecb1b40d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -985,7 +985,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -993,7 +993,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1001,7 +1001,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1010,7 +1010,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 7>;
@@ -1018,7 +1018,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77970";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index d672b320bc14..387e6d99f2f3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1266,7 +1266,7 @@ gether: ethernet@e7400000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -1274,7 +1274,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ir: mmu@ff8b0000 {
+		ipmmu_ir: iommu@ff8b0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xff8b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 3>;
@@ -1282,7 +1282,7 @@ ipmmu_ir: mmu@ff8b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -1291,7 +1291,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -1299,7 +1299,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe990000 {
+		ipmmu_vc0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -1307,7 +1307,7 @@ ipmmu_vc0: mmu@fe990000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -1315,7 +1315,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vip0: mmu@e7b00000 {
+		ipmmu_vip0: iommu@e7b00000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7b00000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -1323,7 +1323,7 @@ ipmmu_vip0: mmu@e7b00000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vip1: mmu@e7960000 {
+		ipmmu_vip1: iommu@e7960000 {
 			compatible = "renesas,ipmmu-r8a77980";
 			reg = <0 0xe7960000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 11>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 1543f18e834f..cd11f24744d4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -817,7 +817,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -825,7 +825,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -833,7 +833,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -841,7 +841,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -850,7 +850,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -858,7 +858,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -866,7 +866,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -874,7 +874,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -882,7 +882,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -890,7 +890,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77990";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e8d2290fe79d..e5617ec0f49c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -507,7 +507,7 @@ dmac2: dma-controller@e7310000 {
 			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
 		};
 
-		ipmmu_ds0: mmu@e6740000 {
+		ipmmu_ds0: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
@@ -515,7 +515,7 @@ ipmmu_ds0: mmu@e6740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_ds1: mmu@e7740000 {
+		ipmmu_ds1: iommu@e7740000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
@@ -523,7 +523,7 @@ ipmmu_ds1: mmu@e7740000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_hc: mmu@e6570000 {
+		ipmmu_hc: iommu@e6570000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
@@ -531,7 +531,7 @@ ipmmu_hc: mmu@e6570000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mm: mmu@e67b0000 {
+		ipmmu_mm: iommu@e67b0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
@@ -540,7 +540,7 @@ ipmmu_mm: mmu@e67b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_mp: mmu@ec670000 {
+		ipmmu_mp: iommu@ec670000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
@@ -548,7 +548,7 @@ ipmmu_mp: mmu@ec670000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_pv0: mmu@fd800000 {
+		ipmmu_pv0: iommu@fd800000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
@@ -556,7 +556,7 @@ ipmmu_pv0: mmu@fd800000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
@@ -564,7 +564,7 @@ ipmmu_rt: mmu@ffc80000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vc0: mmu@fe6b0000 {
+		ipmmu_vc0: iommu@fe6b0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
@@ -572,7 +572,7 @@ ipmmu_vc0: mmu@fe6b0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vi0: mmu@febd0000 {
+		ipmmu_vi0: iommu@febd0000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
@@ -580,7 +580,7 @@ ipmmu_vi0: mmu@febd0000 {
 			#iommu-cells = <1>;
 		};
 
-		ipmmu_vp0: mmu@fe990000 {
+		ipmmu_vp0: iommu@fe990000 {
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit d120b5f98031eefc22164ae8c6ea3711e7a04c19 ]

Remove the uneeded "amlogic,p201", "amlogic,s905" in the board compatible list.

It fixes:
meson-gxbb-kii-pro.dt.yaml: /: compatible: ['videostrong,kii-pro', 'amlogic,p201', 'amlogic,s905', 'amlogic,meson-gxbb'] is not valid under any of the given schemas

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-5-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index 6c9cc45fb417..e8394a8269ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 / {
-	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
 	model = "Videostrong KII Pro";
 
 	leds {
-- 
2.25.1

[PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 9ecded10b4b6af238da0c86197b0418912e7513e ]

The GX and AXG SCP sram nodes were using invalid compatible and
node names for the sram entries.

Fixup the sram entries node names, and use proper compatible for them.

It notably fixes:
sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi |  6 +++---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 10 +++++-----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index aace3d32a3df..8e6281c685fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1735,18 +1735,18 @@ sd_emmc_c: mmc@7000 {
 		};
 
 		sram: sram@fffc0000 {
-			compatible = "amlogic,meson-axg-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xfffc0000 0x0 0x20000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xfffc0000 0x20000>;
 
-			cpu_scp_lpri: scp-shmem@13000 {
+			cpu_scp_lpri: scp-sram@13000 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@13400 {
+			cpu_scp_hpri: scp-sram@13400 {
 				compatible = "amlogic,meson-axg-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 03f79fe045b7..e2bb68ec8502 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -398,20 +398,20 @@ gic: interrupt-controller@c4301000 {
 		};
 
 		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
+			compatible = "mmio-sram";
 			reg = <0x0 0xc8000000 0x0 0x14000>;
 
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x0 0xc8000000 0x14000>;
 
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13000 0x400>;
 			};
 
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
 				reg = <0x13400 0x400>;
 			};
 		};
-- 
2.25.1

[PATCH AUTOSEL 5.7 048/388] arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes

[Sasha Levin]

From: Marek Behún <marek.behun@nic.cz>

[ Upstream commit 7a2c36b039d2343cc29fec6102da839477b8dc60 ]

Use sdhci-caps-mask to forbid SDR104 mode on the SDIO capable SDHCI
controller. Without this the device cannot pass electromagnetic
interference certifications.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index bb42d1e6a4e9..47fee66c70cb 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -179,6 +179,8 @@ &sdhci1 {
 	marvell,pad-type = "sd";
 	vqmmc-supply = <&vsdio_reg>;
 	mmc-pwrseq = <&sdhci1_pwrseq>;
+	/* forbid SDR104 for FCC purposes */
+	sdhci-caps-mask = <0x2 0x0>;
 	status = "okay";
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 049/388] arm64: dts: armada-3720-turris-mox: fix SFP binding

[Sasha Levin]

From: Marek Behún <marek.behun@nic.cz>

[ Upstream commit c2671acbbbd822ef077cc168991e0a7dbe2172c9 ]

The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched
kernel where the latter was working.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 47fee66c70cb..0e0491ca2930 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -95,7 +95,7 @@ sdhci1_pwrseq: sdhci1-pwrseq {
 	};
 
 	sfp: sfp {
-		compatible = "sff,sfp+";
+		compatible = "sff,sfp";
 		i2c-bus = <&i2c0>;
 		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 050/388] arm64: dts: juno: Fix GIC child nodes

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit a78aee9e434932a500db36cc6d88daeff3745e9f ]

The GIC DT nodes for the Juno boards were not fully compliant with
the DT binding, which has certain expectations about child nodes and
their size and address cells values.

Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.

Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 50 +++++++++++++-------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f5889281545f..59b6ac0b828a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -74,35 +74,35 @@ gic: interrupt-controller@2c010000 {
 		      <0x0 0x2c02f000 0 0x2000>,
 		      <0x0 0x2c04f000 0 0x2000>,
 		      <0x0 0x2c06f000 0 0x2000>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#interrupt-cells = <3>;
-		#size-cells = <2>;
+		#size-cells = <1>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
-		ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+		ranges = <0 0 0x2c1c0000 0x40000>;
 
 		v2m_0: v2m@0 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0 0 0x10000>;
+			reg = <0 0x10000>;
 		};
 
 		v2m@10000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x10000 0 0x10000>;
+			reg = <0x10000 0x10000>;
 		};
 
 		v2m@20000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x20000 0 0x10000>;
+			reg = <0x20000 0x10000>;
 		};
 
 		v2m@30000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0 0x30000 0 0x10000>;
+			reg = <0x30000 0x10000>;
 		};
 	};
 
@@ -546,10 +546,10 @@ pcie_ctlr: pcie@40000000 {
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 		msi-parent = <&v2m_0>;
 		status = "disabled";
 		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
@@ -813,19 +813,19 @@ bus@8000000 {
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 15>;
-		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	site2: tlx@60000000 {
@@ -835,6 +835,6 @@ site2: tlx@60000000 {
 		ranges = <0 0 0x60000000 0x10000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0>;
-		interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 	};
 };
-- 
2.25.1

[PATCH AUTOSEL 5.7 056/388] arm64: dts: fvp: Fix GIC child nodes

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 78631aecc52c4b2adcf611769df2ff9c67ac16d0 ]

The GIC DT nodes for the fastmodels were not fully compliant with the
DT binding, which has certain expectations about child nodes and their
size and address cells values.

Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.

Since the .dts files share interrupt nexus nodes across different
interrupt controllers (GICv2 vs. GICv3), we need to use the only
commonly allowed #address-size value of <1> for both.

Link: https://lore.kernel.org/r/20200513103016.130417-11-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/arm/foundation-v8-gicv2.dtsi     |  2 +-
 .../boot/dts/arm/foundation-v8-gicv3.dtsi     |  8 +-
 arch/arm64/boot/dts/arm/foundation-v8.dtsi    | 86 +++++++++----------
 3 files changed, 48 insertions(+), 48 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
index 15fe81738e94..dfb23dfc0b0f 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
@@ -8,7 +8,7 @@ / {
 	gic: interrupt-controller@2c001000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <2>;
+		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x2c001000 0 0x1000>,
 		      <0x0 0x2c002000 0 0x2000>,
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
index f2c75c756039..906f51935b36 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
@@ -8,9 +8,9 @@ / {
 	gic: interrupt-controller@2f000000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2f000000 0x100000>;
 		interrupt-controller;
 		reg =	<0x0 0x2f000000 0x0 0x10000>,
 			<0x0 0x2f100000 0x0 0x200000>,
@@ -22,7 +22,7 @@ gic: interrupt-controller@2f000000 {
 		its: its@2f020000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
-			reg = <0x0 0x2f020000 0x0 0x20000>;
+			reg = <0x20000 0x20000>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 12f039fa3dad..60ec37d6c9d3 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -107,49 +107,49 @@ bus@8000000 {
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic 0 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic 0 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic 0 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic 0 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic 0 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic 0 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic 0 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic 0 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic 0 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 
 		ethernet@2,02000000 {
 			compatible = "smsc,lan91c111";
-- 
2.25.1

[PATCH AUTOSEL 5.7 059/388] arm64: dts: fvp/juno: Fix node address fields

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit bb5cce12ac717c7462217cd493ed701d12d6dbce ]

The Arm Ltd. boards were using an outdated address convention in the DT
node names, by separating the high from the low 32-bits of an address by
a comma.

Remove the comma from the node name suffix to be DT spec compliant.

Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi              | 10 +++++-----
 arch/arm64/boot/dts/arm/foundation-v8.dtsi           |  4 ++--
 arch/arm64/boot/dts/arm/juno-motherboard.dtsi        |  6 +++---
 arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi |  2 +-
 arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi     |  6 +++---
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 5c183483ec3b..8010cdcdb37a 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -31,7 +31,7 @@ motherboard {
 			#interrupt-cells = <1>;
 			ranges;
 
-			nor_flash: flash@0,00000000 {
+			nor_flash: flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>,
 				      <4 0x00000000 0x04000000>;
@@ -41,13 +41,13 @@ partitions {
 				};
 			};
 
-			psram@1,00000000 {
+			psram@100000000 {
 				compatible = "arm,vexpress-psram", "mtd-ram";
 				reg = <1 0x00000000 0x02000000>;
 				bank-width = <4>;
 			};
 
-			ethernet@2,02000000 {
+			ethernet@202000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x02000000 0x10000>;
 				interrupts = <15>;
@@ -59,14 +59,14 @@ ethernet@2,02000000 {
 				vddvario-supply = <&v2m_fixed_3v3>;
 			};
 
-			usb@2,03000000 {
+			usb@203000000 {
 				compatible = "nxp,usb-isp1761";
 				reg = <2 0x03000000 0x20000>;
 				interrupts = <16>;
 				port1-otg;
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 60ec37d6c9d3..e2da63f78298 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -151,7 +151,7 @@ bus@8000000 {
 				<0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 
-		ethernet@2,02000000 {
+		ethernet@202000000 {
 			compatible = "smsc,lan91c111";
 			reg = <2 0x02000000 0x10000>;
 			interrupts = <15>;
@@ -178,7 +178,7 @@ v2m_refclk32khz: refclk32khz {
 			clock-output-names = "v2m:refclk32khz";
 		};
 
-		iofpga@3,00000000 {
+		iofpga@300000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index e3983ded3c3c..d5cefddde08c 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -103,7 +103,7 @@ nmi-button {
 				};
 			};
 
-			flash@0,00000000 {
+			flash@0 {
 				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>;
@@ -120,7 +120,7 @@ partitions {
 				};
 			};
 
-			ethernet@2,00000000 {
+			ethernet@200000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x00000000 0x10000>;
 				interrupts = <3>;
@@ -133,7 +133,7 @@ ethernet@2,00000000 {
 				vddvario-supply = <&mb_fixed_3v3>;
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
index 60703b5763c6..350cbf17e8b4 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -9,7 +9,7 @@ bus@8000000 {
 		motherboard {
 			arm,v2m-memory-map = "rs2";
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				virtio-p9@140000 {
 					compatible = "virtio,mmio";
 					reg = <0x140000 0x200>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index e333c8d2d0e4..d1bfa62ca073 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -17,14 +17,14 @@ motherboard {
 			#interrupt-cells = <1>;
 			ranges;
 
-			flash@0,00000000 {
+			flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>,
 				      <4 0x00000000 0x04000000>;
 				bank-width = <4>;
 			};
 
-			ethernet@2,02000000 {
+			ethernet@202000000 {
 				compatible = "smsc,lan91c111";
 				reg = <2 0x02000000 0x10000>;
 				interrupts = <15>;
@@ -51,7 +51,7 @@ v2m_refclk32khz: refclk32khz {
 				clock-output-names = "v2m:refclk32khz";
 			};
 
-			iofpga@3,00000000 {
+			iofpga@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 061/388] arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges

[Sasha Levin]

From: Maulik Shah <mkshah@codeaurora.org>

[ Upstream commit 7d2f29e49477aa51339e719cf73f0945c39c8a9e ]

Few PDC interrupts do not map to respective parent GIC interrupt.
Fix this by correcting the pdc interrupt map.

Fixes: 22f185ee81d2 ("arm64: dts: qcom: sc7180: Add pdc interrupt controller")
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1589804402-27130-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101ad623..eea92b314fc6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1657,8 +1657,7 @@ dispcc: clock-controller@af00000 {
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
-			qcom,pdc-ranges = <0 480 15>, <17 497 98>,
-					  <119 634 4>, <124 639 1>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupt-controller;
-- 
2.25.1

[PATCH AUTOSEL 5.7 114/388] ARM: dts: bcm283x: Use firmware PM driver for V3D

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 3ac395a5b3f3b678663fbb58381fdae2b1b57588 ]

The register based driver turned out to be unstable, specially on RPi3a+
but not limited to it. While a fix is being worked on, we roll back to
using firmware based scheme.

Fixes: e1dc2b2e1bef ("ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20200303173217.3987-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2835-common.dtsi     |  1 -
 arch/arm/boot/dts/bcm2835-rpi-common.dtsi | 12 ++++++++++++
 arch/arm/boot/dts/bcm2835.dtsi            |  1 +
 arch/arm/boot/dts/bcm2836.dtsi            |  1 +
 arch/arm/boot/dts/bcm2837.dtsi            |  1 +
 5 files changed, 15 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm2835-rpi-common.dtsi

diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index 2b1d9d4c0cde..4119271c979d 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
 			compatible = "brcm,bcm2835-v3d";
 			reg = <0x7ec00000 0x1000>;
 			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
 		};
 
 		vc4: gpu {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..8a55b6cded59
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 53bf4579cc22..0549686134ea 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 82d6c4662ae4..b390006aef79 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 9e95fee78e19..0199ec98cd61 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,5 +1,6 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
-- 
2.25.1

[PATCH AUTOSEL 5.7 115/388] arm64: dts: realtek: rtd129x: Fix GIC CPU masks for RTD1293

[Sasha Levin]

From: Andreas Färber <afaerber@suse.de>

[ Upstream commit 31888c8be1486daf2c34ba6c58129635e49d564a ]

Convert from GIC_CPU_MASK_RAW() to GIC_CPU_MASK_SIMPLE().

In case of RTD1293 adjust the arch timer and VGIC interrupts'
CPU masks to its smaller number of CPUs.

Fixes: cf976f660ee8 ("arm64: dts: realtek: Add RTD1293 and Synology DS418j")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/realtek/rtd1293.dtsi | 12 ++++++++----
 arch/arm64/boot/dts/realtek/rtd1295.dtsi |  8 ++++----
 arch/arm64/boot/dts/realtek/rtd1296.dtsi |  8 ++++----
 3 files changed, 16 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
index bd4e22723f7b..2d92b56ac94d 100644
--- a/arch/arm64/boot/dts/realtek/rtd1293.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
@@ -36,16 +36,20 @@ l2: l2-cache {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
 &arm_pmu {
 	interrupt-affinity = <&cpu0>, <&cpu1>;
 };
+
+&gic {
+	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
index 93f0e1d97721..34f6cc6f16fe 100644
--- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -61,13 +61,13 @@ tee@10100000 {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
index 0f9e59cac086..fb864a139c97 100644
--- a/arch/arm64/boot/dts/realtek/rtd1296.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
@@ -50,13 +50,13 @@ l2: l2-cache {
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 119/388] arm64: dts: mt8173: fix unit name warnings

[Sasha Levin]

From: Hsin-Yi Wang <hsinyi@chromium.org>

[ Upstream commit 72b29215aced394d01ca25e432963b619daa0098 ]

Fixing several unit name warnings:

Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000"
Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200210063523.133333-4-hsinyi@chromium.org
[mb: drop fixes for '_' in property name]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d819e44d94a8..6ad1053afd27 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -242,21 +242,21 @@ psci {
 		cpu_on	      = <0x84000003>;
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 		clock-output-names = "clk26m";
 	};
 
-	clk32k: oscillator@1 {
+	clk32k: oscillator1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32000>;
 		clock-output-names = "clk32k";
 	};
 
-	cpum_ck: oscillator@2 {
+	cpum_ck: oscillator2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
@@ -272,19 +272,19 @@ cpu_thermal: cpu_thermal {
 			sustainable-power = <1500>; /* milliwatts */
 
 			trips {
-				threshold: trip-point@0 {
+				threshold: trip-point0 {
 					temperature = <68000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				target: trip-point@1 {
+				target: trip-point1 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit@0 {
+				cpu_crit: cpu_crit0 {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -292,13 +292,13 @@ cpu_crit: cpu_crit@0 {
 			};
 
 			cooling-maps {
-				map@0 {
+				map0 {
 					trip = <&target>;
 					cooling-device = <&cpu0 0 0>,
 							 <&cpu1 0 0>;
 					contribution = <3072>;
 				};
-				map@1 {
+				map1 {
 					trip = <&target>;
 					cooling-device = <&cpu2 0 0>,
 							 <&cpu3 0 0>;
@@ -312,7 +312,7 @@ reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		vpu_dma_reserved: vpu_dma_mem_region {
+		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xb7000000 0 0x500000>;
 			alignment = <0x1000>;
@@ -365,7 +365,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@10005000 {
+		pio: pinctrl@1000b000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;
@@ -572,7 +572,7 @@ mipi_tx1: mipi-dphy@10216000 {
 			status = "disabled";
 		};
 
-		gic: interrupt-controller@10220000 {
+		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 121/388] arm64: dts: qcom: msm8916: remove unit name for thermal trip points

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@linaro.org>

[ Upstream commit fe2aff0c574d206f34f1864d5a0b093694c27142 ]

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.1585562459.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a88a15f2352b..5548d7b5096c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -261,7 +261,7 @@ cpu2_3-thermal {
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu2_3_alert0: trip-point@0 {
+				cpu2_3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -291,7 +291,7 @@ gpu-thermal {
 			thermal-sensors = <&tsens 2>;
 
 			trips {
-				gpu_alert0: trip-point@0 {
+				gpu_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -311,7 +311,7 @@ camera-thermal {
 			thermal-sensors = <&tsens 1>;
 
 			trips {
-				cam_alert0: trip-point@0 {
+				cam_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -326,7 +326,7 @@ modem-thermal {
 			thermal-sensors = <&tsens 0>;
 
 			trips {
-				modem_alert0: trip-point@0 {
+				modem_alert0: trip-point0 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "hot";
-- 
2.25.1

[PATCH AUTOSEL 5.7 122/388] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity

[Sasha Levin]

From: Vincent Stehlé <vincent.stehle@laposte.net>

[ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ]

The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low.
This has been verified on a board and in the schematics [1].

[1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents

Fixes: 8b8061fcbfae ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d043031b..4c6704e4c57e 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@ leds {
 
 		pwr_led {
 			label = "bananapi-m2-zero:red:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
 			default-state = "on";
 		};
 	};
-- 
2.25.1

[PATCH AUTOSEL 5.7 133/388] arm64: dts: qcom: fix pm8150 gpio interrupts

[Sasha Levin]

From: Jonathan Marek <jonathan@marek.ca>

[ Upstream commit 61d2ca503d0b55d2849fd656ce51d8e1e9ba0b6c ]

This was mistakenly copied from the downstream dts, however the upstream
driver works differently.

I only tested this with the pm8150_gpios node (used with volume button),
but the 2 others should be the same.

Fixes: e92b61c8e775 ("arm64: dts: qcom: pm8150l: Add base dts file")
Fixes: 229d5bcad0d0 ("arm64: dts: qcom: pm8150b: Add base dts file")
Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200420153543.14512-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 14 ++------------
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------
 3 files changed, 6 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b6e304748a57..c0b197458665 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -73,18 +73,8 @@ pm8150_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 322379d5c31f..40b5d75a4a1d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -62,18 +62,8 @@ pm8150b_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index eb0e9a090e42..cf05e0685d10 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -56,18 +56,8 @@ pm8150l_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 135/388] arm64: dts: qcom: sm8250: Fix PDC compatible and reg

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 240031967ac4c63713c6e0c3249d734e23c913aa ]

The pdc node suffers from both too narrow compatible and insufficient
cells in the reg, fix these.

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200415054703.739507-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 891d83b2afea..2a7eaefd221d 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -314,8 +314,8 @@ intc: interrupt-controller@17a00000 {
 		};
 
 		pdc: interrupt-controller@b220000 {
-			compatible = "qcom,sm8250-pdc";
-			reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>;
+			compatible = "qcom,sm8250-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
 			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
 					  <125 63 1>, <126 716 12>;
 			#interrupt-cells = <2>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 149/388] of: property: Fix create device links for all child-supplier dependencies

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit ed3655729182a59b9bef1b564c6fc2dcbbbe954e ]

Upon adding a new device from a DT node, we scan its properties and its
children's properties in order to create a consumer/supplier
relationship between the device and the property provider.

That said, it's possible for some of the node's children to be disabled,
which will create links that'll never be fulfilled.

To get around this, use the for_each_available_child_of_node() function
instead of for_each_available_node() when iterating over the node's
children.

Fixes: d4387cd11741 ("of: property: Create device links for all child-supplier depencencies")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/property.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index b4916dcc9e72..a8c2b13521b2 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1296,7 +1296,7 @@ static int of_link_to_suppliers(struct device *dev,
 		if (of_link_property(dev, con_np, p->name))
 			ret = -ENODEV;
 
-	for_each_child_of_node(con_np, child)
+	for_each_available_child_of_node(con_np, child)
 		if (of_link_to_suppliers(dev, child) && !ret)
 			ret = -EAGAIN;
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 150/388] of: property: Do not link to disabled devices

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 7456427af9def0fec5508dd8b861556038ee96a8 ]

When creating a consumer/supplier relationship between two devices,
make sure the supplier node is actually active. Otherwise this will
create a link relationship that will never be fulfilled. This, in the
worst case scenario, will hang the system during boot.

Note that, in practice, the fact that a device-tree represented
consumer/supplier relationship isn't fulfilled will not prevent devices
from successfully probing.

Fixes: a3e1d1a7f5fc ("of: property: Add functional dependency link from DT bindings")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/property.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index a8c2b13521b2..6dc542af5a70 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1045,8 +1045,20 @@ static int of_link_to_phandle(struct device *dev, struct device_node *sup_np,
 	 * Find the device node that contains the supplier phandle.  It may be
 	 * @sup_np or it may be an ancestor of @sup_np.
 	 */
-	while (sup_np && !of_find_property(sup_np, "compatible", NULL))
+	while (sup_np) {
+
+		/* Don't allow linking to a disabled supplier */
+		if (!of_device_is_available(sup_np)) {
+			of_node_put(sup_np);
+			sup_np = NULL;
+		}
+
+		if (of_find_property(sup_np, "compatible", NULL))
+			break;
+
 		sup_np = of_get_next_parent(sup_np);
+	}
+
 	if (!sup_np) {
 		dev_dbg(dev, "Not linking to %pOFP - No device\n", tmp_np);
 		return -ENODEV;
-- 
2.25.1

[PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 5c28dcbb3a1be167c07784b5f710ec602a57bea2 ]

Add missing amlogic,s922x in the board compatible list.

It fixes:
meson-g12b-ugoos-am6.dt.yaml: /: compatible: ['ugoos,am6', 'amlogic,g12b'] is not valid under any of the given schemas

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-4-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 06c5430eb92d..fdaacfd96b97 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -14,7 +14,7 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
-	compatible = "ugoos,am6", "amlogic,g12b";
+	compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
 	model = "Ugoos AM6";
 
 	aliases {
-- 
2.25.1

[PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 08dc0e5dd9aabd52cff9e94febe6b282d29deca4 ]

Fix the leds subnode names to match (^led-[0-9a-f]$|led)

It fixes:
meson-g12b-a311d-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-g12b-s922x-khadas-vim3.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-g12b-odroid-n2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-nanopi-k2.dt.yaml: leds: 'stat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-nexbox-a95x.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-odroidc2.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-pro.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-meta.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-vega-s95-telos.dt.yaml: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-wetek-hub.dt.yaml: leds: 'system' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxbb-wetek-play2.dt.yaml: leds: 'ethernet', 'system', 'wifi' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxl-s905x-libretech-cc.dt.yaml: leds: 'blue', 'system' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxl-s905d-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxm-rbox-pro.dt.yaml: leds: 'blue', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-gxm-s912-libretech-pc.dt.yaml: leds: 'blue', 'green' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-sm1-sei610.dt.yaml: leds: 'bluetooth' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
meson-sm1-khadas-vim3l.dt.yaml: leds: 'red', 'white' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200326165958.19274-6-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi       | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts         | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts       | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts          | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi         | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts       | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi            | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts           | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi           | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts             | 2 +-
 11 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 248b018c83d5..b1da36fdeac6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -96,14 +96,14 @@ dc_in: regulator-dc_in {
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};
 
-		blue {
+		led-blue {
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index d6ca684e0e61..7be3e354093b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -29,7 +29,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-stat {
 			label = "nanopi-k2:blue:stat";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 65ec7dea828c..67d901ed2fa3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -31,7 +31,7 @@ memory@0 {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "a95x:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index b46ef985bb44..70fcfb7b0683 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -49,7 +49,7 @@ usb_otg_pwr: regulator-usb-pwrs {
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c2:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 45cb83625951..222ee8069cfa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -20,7 +20,7 @@ chosen {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "vega-s95:blue:on";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index 1d32d1f6d032..2ab8a3d10079 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -14,13 +14,13 @@ / {
 	model = "WeTek Play 2";
 
 	leds {
-		wifi {
+		led-wifi {
 			label = "wetek-play:wifi-status";
 			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		ethernet {
+		led-ethernet {
 			label = "wetek-play:ethernet-status";
 			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index dee51cf95223..d6133af09d64 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -25,7 +25,7 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "wetek-play:system-status";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index e8348b2728db..a4a71c13891b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -54,14 +54,14 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		system {
+		led-system {
 			label = "librecomputer:system-status";
 			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			panic-indicator;
 		};
 
-		blue {
+		led-blue {
 			label = "librecomputer:blue";
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 420a88e9a195..c89c9f846fb1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -36,13 +36,13 @@ memory@0 {
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "rbox-pro:blue:on";
 			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "rbox-pro:red:standby";
 			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 094ecf2222bb..1ef1e3672b96 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -39,13 +39,13 @@ button-function {
 	leds {
 		compatible = "gpio-leds";
 
-		white {
+		led-white {
 			label = "vim3:white:sys";
 			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		red {
+		led-red {
 			label = "vim3:red";
 			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index dfb2438851c0..5ab139a34c01 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -104,7 +104,7 @@ hdmi_connector_in: endpoint {
 	leds {
 		compatible = "gpio-leds";
 
-		bluetooth {
+		led-bluetooth {
 			label = "sei610:blue:bt";
 			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 			default-state = "off";
-- 
2.25.1

[PATCH AUTOSEL 5.7 164/388] ARM: dts: aspeed: ast2600: Set arch timer always-on

[Sasha Levin]

From: Eddie James <eajames@linux.ibm.com>

[ Upstream commit c998f40f2ae6a48e93206e2c1ea0691479989611 ]

According to ASPEED, FTTMR010 is not intended to be used in the AST2600.
The arch timer should be used, but Linux doesn't enable high-res timers
without being assured that the arch timer is always on, so set that
property in the devicetree.

The FTTMR010 device is described by set to disabled.

This fixes highres timer support for AST2600.

Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 0a29b3b57a9d..fd0e483737a0 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -65,6 +65,7 @@ timer {
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		clocks = <&syscon ASPEED_CLK_HPLL>;
 		arm,cpu-registers-not-fw-configured;
+		always-on;
 	};
 
 	ahb {
@@ -368,6 +369,7 @@ timer: timer@1e782000 {
 						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB1>;
 				clock-names = "PCLK";
+				status = "disabled";
                         };
 
 			uart1: serial@1e783000 {
-- 
2.25.1

[PATCH AUTOSEL 5.7 165/388] ARM: dts: aspeed: Change KCS nodes to v2 binding

[Sasha Levin]

From: Andrew Jeffery <andrew@aj.id.au>

[ Upstream commit fa4c8ec6feaa3237f5d44cb8c6d0aa0dff6e1bcc ]

Fixes the following warnings for both g5 and g6 SoCs:

    arch/arm/boot/dts/aspeed-g5.dtsi:376.19-381.8: Warning
    (unit_address_vs_reg): /ahb/apb/lpc@1e789000/lpc-bmc@0/kcs1@0: node
    has a unit name, but no reg property

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../dts/aspeed-bmc-facebook-tiogapass.dts     |  4 ++--
 arch/arm/boot/dts/aspeed-g5.dtsi              | 24 +++++++++----------
 arch/arm/boot/dts/aspeed-g6.dtsi              | 23 +++++++++---------
 3 files changed, 26 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 5d7cbd9164d4..669980c690f9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -112,13 +112,13 @@ &uart5 {
 &kcs2 {
 	// BMC KCS channel 2
 	status = "okay";
-	kcs_addr = <0xca8>;
+	aspeed,lpc-io-reg = <0xca8>;
 };
 
 &kcs3 {
 	// BMC KCS channel 3
 	status = "okay";
-	kcs_addr = <0xca2>;
+	aspeed,lpc-io-reg = <0xca2>;
 };
 
 &mac0 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f12ec04d3cbc..bc92d3db7b78 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -426,22 +426,22 @@ lpc_bmc: lpc-bmc@0 {
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <8>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <8>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -455,10 +455,10 @@ lpc_host: lpc-host@80 {
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index fd0e483737a0..a2d2ac720a51 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -435,22 +435,23 @@ lpc_bmc: lpc-bmc@0 {
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -464,10 +465,10 @@ lpc_host: lpc-host@80 {
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 185/388] arm64: dts: msm8996: Fix CSI IRQ types

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 4a4a26317ec8aba575f6b85789a42639937bc1a4 ]

Each IRQ_TYPE_NONE interrupt causes a warning at boot.
Fix that by defining an appropriate type.

Fixes: e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1587470425-13726-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 98634d5c4440..d22c364b520a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -989,16 +989,16 @@ camss: camss@a00000 {
 				"csi_clk_mux",
 				"vfe0",
 				"vfe1";
-			interrupts = <GIC_SPI 78 0>,
-				<GIC_SPI 79 0>,
-				<GIC_SPI 80 0>,
-				<GIC_SPI 296 0>,
-				<GIC_SPI 297 0>,
-				<GIC_SPI 298 0>,
-				<GIC_SPI 299 0>,
-				<GIC_SPI 309 0>,
-				<GIC_SPI 314 0>,
-				<GIC_SPI 315 0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "csiphy0",
 				"csiphy1",
 				"csiphy2",
-- 
2.25.1

[PATCH AUTOSEL 5.7 201/388] arm64: dts: qcom: db820c: Fix invalid pm8994 supplies

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 1cacdf5d3bb9644ac7b9339c611ac5b9dd90d09d ]

It's uncertain where the "vreg_s8a_l3a_input" comes from, but the supply
for VDD_L3_L11 on PM8994 should be VREG_S3A_1P3, so correct this - and
drop the vreg_s8a_l3a_input.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Fixes: 83d9ed4342a3 ("arm64: dts: qcom: db820c: Use regulator names from schematics")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200417070712.1376355-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index c4abbccf2bed..eaa1eb70b455 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -117,16 +117,6 @@ vph_pwr: vph-pwr-regulator {
 		regulator-max-microvolt = <3700000>;
 	};
 
-	vreg_s8a_l3a_input: vreg-s8a-l3a-input {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s8a_l3a_input";
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-min-microvolt = <0>;
-		regulator-max-microvolt = <0>;
-	};
-
 	wlan_en: wlan-en-1-8v {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlan_en_gpios>;
@@ -705,14 +695,14 @@ pm8994-regulators {
 		vdd_s11-supply = <&vph_pwr>;
 		vdd_s12-supply = <&vph_pwr>;
 		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
-		vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
 		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
 		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
 		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
 		vdd_l8_l16_l30-supply = <&vph_pwr>;
 		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
 		vdd_l25-supply = <&vreg_s3a_1p3>;
-		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
 
 		vreg_s3a_1p3: s3 {
 			regulator-name = "vreg_s3a_1p3";
-- 
2.25.1

[PATCH AUTOSEL 5.7 202/388] arm64: dts: qcom: c630: Add WiFi node

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 3fb298d0b2f2a1d47d53806d4ddf8f4ae83353cc ]

Specify regulators and enable the &wifi node. The firmware uses the 8
bit version of the host capability message, so specify this quirk.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191018055841.3729591-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 51a670ad15b2..4b9860a2c8eb 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -577,3 +577,14 @@ right_spkr: wsa8810-right{
 		};
 	};
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
-- 
2.25.1

[PATCH AUTOSEL 5.7 214/388] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

[Sasha Levin]

From: Marek Behún <marek.behun@nic.cz>

[ Upstream commit 715878016984b2617f6c1f177c50039e12e7bd5b ]

We found out that we are unable to control the PERST# signal via the
default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
value of this register does not change the pin output when measuring
with voltmeter.

We do not know if this is a bug in the SOC, or if it works only when
PCIe controller is in a certain state.

Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
before training link") says that when this pin changes pinctrl mode
from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
moment.

So currently the situation is that on A3700 boards the PERST# signal is
asserted in U-Boot (because the code in U-Boot issues reset via this pin
via GPIO mode), and then in Linux by the obscure and undocumented
mechanism described by the above mentioned commit.

We want to issue PERST# signal in a known way, therefore this patch
changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
reset-gpios property to the PCIe node in device tree files of
EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
has this property and uDPU does not have a PCIe port).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Remi Pommarel <repk@triplefau.lt>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts           | 3 +++
 arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 +
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts   | 4 ----
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi             | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index f2cc00594d64..3e5789f37206 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -128,6 +128,9 @@ phy1: ethernet-phy@1 {
 
 /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
 &pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 42e992f9c8a5..c92ad664cb0e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -47,6 +47,7 @@ &pcie0 {
 	phys = <&comphy1 0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 };
 
 /* J6 */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 0e0491ca2930..1452c821f8c0 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -128,10 +128,6 @@ rtc@6f {
 	};
 };
 
-&pcie_reset_pins {
-	function = "gpio";
-};
-
 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 000c135e39b7..7909c146eabf 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -317,7 +317,7 @@ sdio_pins: sdio-pins {
 
 				pcie_reset_pins: pcie-reset-pins {
 					groups = "pcie1";
-					function = "pcie";
+					function = "gpio";
 				};
 
 				pcie_clkreq_pins: pcie-clkreq-pins {
-- 
2.25.1

[PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 005231128e9e97461e81fa32421957a7664317ca ]

Let the PHY generate the RX and TX delay on the Odroid-C1 and MXIII
Plus.

Previously we did not know that these boards used an RX delay. We
assumed that setting the TX delay on the MAC side It turns out that
these boards also require an RX delay of 2ns (verified on Odroid-C1,
but the u-boot code uses the same setup on both boards). Ethernet only
worked because u-boot added this RX delay on the MAC side.

The 4ns TX delay was also wrong and the result of using an unsupported
RGMII TX clock divider setting. This has been fixed in the driver with
commit bd6f48546b9cb7 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX
delay on Meson8b/8m2 SoCs").

Switch to phy-mode "rgmii-id" to let the PHY side handle all the delays,
(as recommended by the Ethernet maintainers anyways) to correctly
describe the need for a 2ns RX as well as 2ns TX delay on these boards.
This fixes the Ethernet performance on Odroid-C1 where there was a huge
amount of packet loss when transmitting data due to the incorrect TX
delay.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200512215148.540322-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts    | 3 +--
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 4 +---
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..cb21ac9f517c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -202,9 +202,8 @@ &ethmac {
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 
-	phy-mode = "rgmii";
 	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	nvmem-cells = <&ethernet_mac_address>;
 	nvmem-cell-names = "mac-address";
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b1001c..cc498191ddd1 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -69,9 +69,7 @@ &ethmac {
 	pinctrl-names = "default";
 
 	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-- 
2.25.1

[PATCH AUTOSEL 5.7 247/388] arm64: tegra: Fix ethernet phy-mode for Jetson Xavier

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit bba25915b172c72f6fa635f091624d799e3c9cae ]

The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.

If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.

Fixes: f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 623f7d7d216b..8e3136dfdd62 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -33,7 +33,7 @@ ethernet@2490000 {
 
 			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
 			phy-handle = <&phy>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 
 			mdio {
 				#address-cells = <1>;
-- 
2.25.1

[PATCH AUTOSEL 5.7 248/388] arm64: tegra: Fix flag for 64-bit resources in 'ranges' property

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 3482a7afb261e2de9269a7f9ad0f4a3a82a83a53 ]

Fix flag in PCIe controllers device-tree nodes 'ranges' property to correctly
represent 64-bit resources.

Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index f4ede86e32b4..3c928360f4ed 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1387,7 +1387,7 @@ pcie@14100000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x30100000 0x0  0x30100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1432,7 +1432,7 @@ pcie@14120000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x32100000 0x0  0x32100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1477,7 +1477,7 @@ pcie@14140000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x34100000 0x0  0x34100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
+			  0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
 			  0x82000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
 	};
 
@@ -1522,7 +1522,7 @@ pcie@14160000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x36100000 0x0  0x36100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
@@ -1567,7 +1567,7 @@ pcie@14180000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
@@ -1616,7 +1616,7 @@ pcie@141a0000 {
 
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0  0x3a100000 0x0  0x3a100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
+			  0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
 			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
 	};
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 299/388] of: Fix a refcounting bug in __of_attach_node_sysfs()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ]

The problem in this code is that if kobject_add() fails, then it should
call of_node_put(np) to drop the reference count.  I've actually moved
the of_node_get(np) later in the function to avoid needing to do clean
up.

Fixes: 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/kobj.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
index c72eef988041..a32e60b024b8 100644
--- a/drivers/of/kobj.c
+++ b/drivers/of/kobj.c
@@ -134,8 +134,6 @@ int __of_attach_node_sysfs(struct device_node *np)
 	if (!name)
 		return -ENOMEM;
 
-	of_node_get(np);
-
 	rc = kobject_add(&np->kobj, parent, "%s", name);
 	kfree(name);
 	if (rc)
@@ -144,6 +142,7 @@ int __of_attach_node_sysfs(struct device_node *np)
 	for_each_property_of_node(np, pp)
 		__of_add_property_sysfs(np, pp);
 
+	of_node_get(np);
 	return 0;
 }
 
-- 
2.25.1