From: Shawn Guo <shawnguo@kernel.org>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: imx: imx6qdl-gw: add Gateworks System Controller
Date: Thu, 18 Jun 2020 15:17:16 +0800 [thread overview]
Message-ID: <20200618071715.GD30139@dragon> (raw)
In-Reply-To: <1589985459-4874-1-git-send-email-tharvey@gateworks.com>
On Wed, May 20, 2020 at 07:37:39AM -0700, Tim Harvey wrote:
> Add Gateworks System Controller support to Gateworks Ventana boards:
> - add dt bindings for GSC mfd driver and hwmon driver for ADC's and
> fan controllers.
> - add dt bindings for gpio-keys driver for push-button and interrupt events
> from the GSC.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 152 +++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 158 ++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 164 +++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 166 ++++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 146 ++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 152 +++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 140 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 139 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 140 +++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 141 ++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 159 +++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 146 +++++++++++++++++++++++++++++-
> arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 152 ++++++++++++++++++++++++++++++-
> 14 files changed, 2062 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> index 419a7cd..5fbf7d1 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
> @@ -19,6 +19,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
We recommend to use hyphen than underscore in name name.
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
Use defines from include/dt-bindings/input/linux-event-codes.h, you can
drop the comments then.
Shawn
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -102,6 +149,103 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -126,13 +270,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -387,6 +524,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> index 60563ff..9f7436d 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
> @@ -28,6 +28,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -165,6 +212,109 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -189,13 +339,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -504,6 +647,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> index 8942bec..2a5f484 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
> @@ -28,6 +28,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -158,6 +205,115 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -182,13 +338,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -486,6 +635,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index c40583d..d25d73d 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -29,6 +29,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -195,6 +242,117 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> + };
> +
> + fan-controller@2c {
> + compatible = "gw,gsc-fan";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2c>;
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -219,13 +377,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -571,6 +722,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> index c38e86e..90c6d0d 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
> @@ -63,6 +63,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -167,6 +214,97 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8a";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0b";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -191,13 +329,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -464,6 +595,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> index bb35971..0d563be 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
> @@ -20,6 +20,53 @@
> bootargs = "console=ttymxc1,115200";
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -92,6 +139,103 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -116,13 +260,6 @@
> pagesize = <16>;
> };
>
> - gpio: pca9555@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> rtc: ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -305,6 +442,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> index ee85031..7f67180 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> @@ -61,6 +61,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -130,11 +177,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio: pca9555@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8a";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0b";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_an1";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> @@ -428,6 +565,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> index 69ca70d..cb20301 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
> @@ -88,6 +88,53 @@
> default-on;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -243,6 +290,115 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> +
> + channel@26 {
> + gw,mode = <1>;
> + reg = <0x26>;
> + label = "vdd_gps";
> + };
> +
> + channel@29 {
> + gw,mode = <1>;
> + reg = <0x29>;
> + label = "vdd_an2";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> eeprom1: eeprom@50 {
> compatible = "atmel,24c02";
> reg = <0x50>;
> @@ -267,13 +423,6 @@
> pagesize = <16>;
> };
>
> - pca9555: gpio@23 {
> - compatible = "nxp,pca9555";
> - reg = <0x23>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> ds1672: rtc@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> @@ -608,6 +757,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> index aee9221..e1bf19e 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
> @@ -71,6 +71,53 @@
> default-brightness-level = <100>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -183,11 +230,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - pca9555: gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> index 76d6cf5..1535ef6 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
> @@ -68,6 +68,53 @@
> default-brightness-level = <7>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -205,11 +252,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - pca9555: gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom1: eeprom@50 {
> @@ -503,6 +640,7 @@
> fsl,pins = <
> MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
> MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
> >;
> };
>
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> index 0bdebdd..81853b5 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
> @@ -19,6 +19,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -102,11 +149,101 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_an1";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> @@ -133,7 +270,7 @@
> pagesize = <16>;
> };
>
> - rtc@68 {
> + ds1672@68 {
> compatible = "dallas,ds1672";
> reg = <0x68>;
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> index 0857de5..2f34623 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
> @@ -22,6 +22,53 @@
> reg = <0x10000000 0x20000000>;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -111,11 +158,121 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@6 {
> + gw,mode = <0>;
> + reg = <0x06>;
> + label = "temp";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@82 {
> + gw,mode = <2>;
> + reg = <0x82>;
> + label = "vdd_vin";
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <800000>;
> + };
> +
> + channel@84 {
> + gw,mode = <2>;
> + reg = <0x84>;
> + label = "vdd_5p0";
> + gw,voltage-divider-ohms = <22100 10000>;
> + };
> +
> + channel@86 {
> + gw,mode = <2>;
> + reg = <0x86>;
> + label = "vdd_3p3";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@88 {
> + gw,mode = <2>;
> + reg = <0x88>;
> + label = "vdd_2p5";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@8c {
> + gw,mode = <2>;
> + reg = <0x8c>;
> + label = "vdd_3p0";
> + };
> +
> + channel@8e {
> + gw,mode = <2>;
> + reg = <0x8e>;
> + label = "vdd_arm";
> + };
> +
> + channel@90 {
> + gw,mode = <2>;
> + reg = <0x90>;
> + label = "vdd_soc";
> + };
> +
> + channel@92 {
> + gw,mode = <2>;
> + reg = <0x92>;
> + label = "vdd_1p5";
> + };
> +
> + channel@98 {
> + gw,mode = <2>;
> + reg = <0x98>;
> + label = "vdd_1p8";
> + };
> +
> + channel@9a {
> + gw,mode = <2>;
> + reg = <0x9a>;
> + label = "vdd_1p0";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@9c {
> + gw,mode = <2>;
> + reg = <0x9c>;
> + label = "vdd_an1";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@a2 {
> + gw,mode = <2>;
> + reg = <0xa2>;
> + label = "vdd_gsc";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> index 8c57fd2..0e2dbc8 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
> @@ -20,6 +20,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -106,11 +153,108 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + gw,mode = <0>;
> + reg = <0x00>;
> + label = "temp";
> + };
> +
> + channel@2 {
> + gw,mode = <1>;
> + reg = <0x02>;
> + label = "vdd_vin";
> + };
> +
> + channel@5 {
> + gw,mode = <1>;
> + reg = <0x05>;
> + label = "vdd_3p3";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@b {
> + gw,mode = <1>;
> + reg = <0x0b>;
> + label = "vdd_5p0";
> + };
> +
> + channel@e {
> + gw,mode = <1>;
> + reg = <0xe>;
> + label = "vdd_arm";
> + };
> +
> + channel@11 {
> + gw,mode = <1>;
> + reg = <0x11>;
> + label = "vdd_soc";
> + };
> +
> + channel@14 {
> + gw,mode = <1>;
> + reg = <0x14>;
> + label = "vdd_3p0";
> + };
> +
> + channel@17 {
> + gw,mode = <1>;
> + reg = <0x17>;
> + label = "vdd_1p5";
> + };
> +
> + channel@1d {
> + gw,mode = <1>;
> + reg = <0x1d>;
> + label = "vdd_1p8";
> + };
> +
> + channel@20 {
> + gw,mode = <1>;
> + reg = <0x20>;
> + label = "vdd_1p0";
> + };
> +
> + channel@23 {
> + gw,mode = <1>;
> + reg = <0x23>;
> + label = "vdd_2p5";
> + };
> + };
> +
> + fan-controller@a {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "gw,gsc-fan";
> + reg = <0x0a>;
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> index 635c203..5fa79c9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
> @@ -19,6 +19,53 @@
> stdout-path = &uart2;
> };
>
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + user_pb {
> + label = "user_pb";
> + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
> + linux,code = <256>; /* BTN_0 */
> + };
> +
> + user_pb1x {
> + label = "user_pb1x";
> + linux,code = <257>; /* BTN_1 */
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key_erased {
> + label = "key-erased";
> + linux,code = <258>; /* BTN_2 */
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + eeprom_wp {
> + label = "eeprom_wp";
> + linux,code = <259>; /* BTN_3 */
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + tamper {
> + label = "tamper";
> + linux,code = <260>; /* BTN_4 */
> + interrupt-parent = <&gsc>;
> + interrupts = <5>;
> + };
> +
> + switch_hold {
> + label = "switch_hold";
> + linux,code = <261>; /* BTN_5 */
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> @@ -87,11 +134,114 @@
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> - gpio@23 {
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <4 GPIO_ACTIVE_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #size-cells = <0>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@6 {
> + gw,mode = <0>;
> + reg = <0x06>;
> + label = "temp";
> + };
> +
> + channel@8 {
> + gw,mode = <1>;
> + reg = <0x08>;
> + label = "vdd_bat";
> + };
> +
> + channel@82 {
> + gw,mode = <2>;
> + reg = <0x82>;
> + label = "vdd_vin";
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <800000>;
> + };
> +
> + channel@84 {
> + gw,mode = <2>;
> + reg = <0x84>;
> + label = "vdd_5p0";
> + gw,voltage-divider-ohms = <22100 10000>;
> + };
> +
> + channel@86 {
> + gw,mode = <2>;
> + reg = <0x86>;
> + label = "vdd_3p3";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@88 {
> + gw,mode = <2>;
> + reg = <0x88>;
> + label = "vdd_2p5";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@8c {
> + gw,mode = <2>;
> + reg = <0x8c>;
> + label = "vdd_arm";
> + };
> +
> + channel@8e {
> + gw,mode = <2>;
> + reg = <0x8e>;
> + label = "vdd_soc";
> + };
> +
> + channel@90 {
> + gw,mode = <2>;
> + reg = <0x90>;
> + label = "vdd_1p5";
> + };
> +
> + channel@92 {
> + gw,mode = <2>;
> + reg = <0x92>;
> + label = "vdd_1p0";
> + };
> +
> + channel@98 {
> + gw,mode = <2>;
> + reg = <0x98>;
> + label = "vdd_3p0";
> + };
> +
> + channel@9a {
> + gw,mode = <2>;
> + reg = <0x9a>;
> + label = "vdd_an1";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@a2 {
> + gw,mode = <2>;
> + reg = <0xa2>;
> + label = "vdd_gsc";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> + };
> + };
> +
> + gsc_gpio: pca9555@23 {
> compatible = "nxp,pca9555";
> reg = <0x23>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> };
>
> eeprom@50 {
> --
> 2.7.4
>
next prev parent reply other threads:[~2020-06-18 7:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 14:37 [PATCH] ARM: dts: imx: imx6qdl-gw: add Gateworks System Controller Tim Harvey
2020-06-18 7:17 ` Shawn Guo [this message]
2020-06-18 16:19 ` [PATCH v2] ARM: dts: imx6qdl-gw: add Gateworks System Controller support Tim Harvey
2020-06-23 2:49 ` Shawn Guo
2020-06-23 18:35 ` [PATCH v3] " Tim Harvey
2020-07-11 10:42 ` Shawn Guo
2020-07-13 11:50 ` Shawn Guo
2020-07-16 15:35 ` [PATCH v4] " Tim Harvey
2020-07-20 1:48 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618071715.GD30139@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).