From: Chris Healy <cphealy@gmail.com>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, stefan@agner.ch,
robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
festevam@gmail.com
Cc: Andrew Lunn <andrew@lunn.ch>, Chris Healy <cphealy@gmail.com>
Subject: [PATCH v2] arm: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
Date: Wed, 8 Jul 2020 17:11:54 -0700 [thread overview]
Message-ID: <20200709001154.7403-1-cphealy@gmail.com> (raw)
From: Andrew Lunn <andrew@lunn.ch>
The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Chris Healy <cphealy@gmail.com>
---
v2:
- convert spaces back to tabs
- Correct from line to show Andrew as the original author
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff1>;
};
@@ -194,7 +194,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_3";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
@@ -202,7 +202,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_4";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff3>;
};
@@ -210,7 +210,7 @@
port@5 {
reg = <5>;
label = "eth_fc_1000_5";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff4>;
};
@@ -218,7 +218,7 @@
port@6 {
reg = <6>;
label = "eth_fc_1000_6";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff5>;
};
@@ -226,7 +226,7 @@
port@7 {
reg = <7>;
label = "eth_fc_1000_7";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff6>;
};
@@ -234,7 +234,7 @@
port@9 {
reg = <9>;
label = "eth_fc_1000_1";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff0>;
};
@@ -269,7 +269,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_8";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff7>;
};
@@ -277,7 +277,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_9";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff8>;
};
@@ -285,7 +285,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_10";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff9>;
};
--
2.21.3
next reply other threads:[~2020-07-09 0:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 0:11 Chris Healy [this message]
2020-07-13 8:25 ` [PATCH v2] arm: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200709001154.7403-1-cphealy@gmail.com \
--to=cphealy@gmail.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).