* [PATCH v5 0/2] shtc1: add support for device tree bindings
@ 2020-07-10 2:15 Chris Ruehl
2020-07-10 2:15 ` [PATCH v5 1/2] hwmon: " Chris Ruehl
2020-07-10 2:15 ` [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl
0 siblings, 2 replies; 6+ messages in thread
From: Chris Ruehl @ 2020-07-10 2:15 UTC (permalink / raw)
To: Chris Ruehl
Cc: Jack Lo, devicetree, Jean Delvare, Guenter Roeck, linux-hwmon,
linux-kernel
Add support for DTS bindings to the shtc driver
The patches add the compatible table and of_property_read_bool to the
shtc1.c. Newly created Yaml document has been released to the
Documentation/devicetree/hwmon/sensirion,shtc1.yaml
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
Version 5
devicetree/driver-source: name conversion sensirion,low-precision sensirion,blocking-io
use const: 0x70 with the reg:
Version 4
Fix errors report by make dt_binding_check (devicetree)
Set maintainers for the yaml document to my own.
Version 3
Fix errors report with checkpatch.pl
Correct logic, add (!) when check for sensirion,low_precision
Version 2
remove the #ifdef CONFIG_OF
ignore platform data if dev->of_node is valid
use boolean only therefor use sensirion,low_precise to fit the logic
add missing driver.of_match_table entry
Version 1
initial version
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v5 1/2] hwmon: shtc1: add support for device tree bindings 2020-07-10 2:15 [PATCH v5 0/2] shtc1: add support for device tree bindings Chris Ruehl @ 2020-07-10 2:15 ` Chris Ruehl 2020-07-10 2:15 ` [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl 1 sibling, 0 replies; 6+ messages in thread From: Chris Ruehl @ 2020-07-10 2:15 UTC (permalink / raw) To: Chris Ruehl Cc: Jack Lo, devicetree, Guenter Roeck, Jean Delvare, linux-hwmon, linux-kernel Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> --- drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c index a0078ccede03..7993a5ff8768 100644 --- a/drivers/hwmon/shtc1.c +++ b/drivers/hwmon/shtc1.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/platform_data/shtc1.h> +#include <linux/of.h> /* commands (high precision mode) */ static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 }; @@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client, enum shtcx_chips chip = id->driver_data; struct i2c_adapter *adap = client->adapter; struct device *dev = &client->dev; + struct device_node *np = dev->of_node; if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) { dev_err(dev, "plain i2c transactions not supported\n"); @@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client, data->client = client; data->chip = chip; - if (client->dev.platform_data) - data->setup = *(struct shtc1_platform_data *)dev->platform_data; + if (np) { + data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking-io"); + data->setup.high_precision = !of_property_read_bool(np, "sensicon,low-precision"); + } else { + if (client->dev.platform_data) + data->setup = *(struct shtc1_platform_data *)dev->platform_data; + } + shtc1_select_command(data); mutex_init(&data->update_lock); @@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = { }; MODULE_DEVICE_TABLE(i2c, shtc1_id); +static const struct of_device_id shtc1_of_match[] = { + { .compatible = "sensirion,shtc1" }, + { .compatible = "sensirion,shtw1" }, + { .compatible = "sensirion,shtc3" }, + { } +}; +MODULE_DEVICE_TABLE(of, shtc1_of_match); + static struct i2c_driver shtc1_i2c_driver = { - .driver.name = "shtc1", + .driver = { + .name = "shtc1", + .of_match_table = shtc1_of_match, + }, .probe = shtc1_probe, .id_table = shtc1_id, }; -- 2.20.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml 2020-07-10 2:15 [PATCH v5 0/2] shtc1: add support for device tree bindings Chris Ruehl 2020-07-10 2:15 ` [PATCH v5 1/2] hwmon: " Chris Ruehl @ 2020-07-10 2:15 ` Chris Ruehl 2020-07-10 16:31 ` Rob Herring 1 sibling, 1 reply; 6+ messages in thread From: Chris Ruehl @ 2020-07-10 2:15 UTC (permalink / raw) To: Chris Ruehl Cc: Jack Lo, devicetree, Jean Delvare, Guenter Roeck, Rob Herring, linux-hwmon, linux-kernel Add documentation for the newly added DTS support in the shtc1 driver. To align with the drivers logic to have high precision by default a boolean sensirion,low_precision is used to switch to low precision. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> --- .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml new file mode 100644 index 000000000000..140cf3043a27 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHTC1 Humidity and Temperature Sensor IC + +maintainers: + - chris.ruehl@gtsys.com.hk + +description: | + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + designed especially for battery-driven high-volume consumer electronics + applications. + For further information refere to Documentation/hwmon/shtc1.rst + + This binding document describes the binding for the hardware monitor + portion of the driver. + +properties: + compatible: + enum: + - sensirion,shtc1 + - sensirion,shtw1 + - sensirion,shtc3 + + reg: + const: 0x70 + + sensirion,blocking-io: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the driver hold the i2c bus until measurement is finished. + + sensirion,low-precision: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, the sensor aquire data with low precision (not recommended). + The driver aquire data with high precision by default. + +required: + - compatible + - reg + +examples: + - | + i2c1 { + clock-frequency = <400000>; + + shtc3@70 { + compatible = "sensirion,shtc3"; + reg = <0x70> + sensirion,blocking-io; + }; + }; +... -- 2.20.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml 2020-07-10 2:15 ` [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl @ 2020-07-10 16:31 ` Rob Herring 2020-07-11 10:05 ` Chris Ruehl 0 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2020-07-10 16:31 UTC (permalink / raw) To: Chris Ruehl Cc: Guenter Roeck, Jack Lo, linux-hwmon, linux-kernel, Rob Herring, Jean Delvare, devicetree On Fri, 10 Jul 2020 10:15:35 +0800, Chris Ruehl wrote: > Add documentation for the newly added DTS support in the shtc1 driver. > To align with the drivers logic to have high precision by default > a boolean sensirion,low_precision is used to switch to low precision. > > Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> > --- > .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml > My bot found errors running 'make dt_binding_check' on your patch: Error: Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:25.13-14 syntax error FATAL ERROR: Unable to parse input tree scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml' failed make[1]: *** [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... Makefile:1347: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1326414 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml 2020-07-10 16:31 ` Rob Herring @ 2020-07-11 10:05 ` Chris Ruehl 2020-07-11 23:59 ` Chris Ruehl 0 siblings, 1 reply; 6+ messages in thread From: Chris Ruehl @ 2020-07-11 10:05 UTC (permalink / raw) To: Rob Herring Cc: Guenter Roeck, Jack Lo, linux-hwmon, linux-kernel, Rob Herring, Jean Delvare, devicetree On 11/7/2020 12:31 am, Rob Herring wrote: > On Fri, 10 Jul 2020 10:15:35 +0800, Chris Ruehl wrote: >> Add documentation for the newly added DTS support in the shtc1 driver. >> To align with the drivers logic to have high precision by default >> a boolean sensirion,low_precision is used to switch to low precision. >> >> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> >> --- >> .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++ >> 1 file changed, 57 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml >> > > > My bot found errors running 'make dt_binding_check' on your patch: > > Error: Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:25.13-14 syntax error > FATAL ERROR: Unable to parse input tree > scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml' failed > make[1]: *** [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml] Error 1 > make[1]: *** Waiting for unfinished jobs.... > Makefile:1347: recipe for target 'dt_binding_check' failed > make: *** [dt_binding_check] Error 2 > > > See https://patchwork.ozlabs.org/patch/1326414 > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure dt-schema is up to date: > > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade > > Please check and re-submit. > Hi Rob, I did run the test and didn't had any Error. dt-schema 2020.06 installed from git. pip3 install -e. Can you help? Chris ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml 2020-07-11 10:05 ` Chris Ruehl @ 2020-07-11 23:59 ` Chris Ruehl 0 siblings, 0 replies; 6+ messages in thread From: Chris Ruehl @ 2020-07-11 23:59 UTC (permalink / raw) To: Rob Herring Cc: Guenter Roeck, Jack Lo, linux-hwmon, linux-kernel, Rob Herring, Jean Delvare, devicetree Morning, On 11/7/2020 6:05 pm, Chris Ruehl wrote: > > On 11/7/2020 12:31 am, Rob Herring wrote: >> On Fri, 10 Jul 2020 10:15:35 +0800, Chris Ruehl wrote: >>> Add documentation for the newly added DTS support in the shtc1 driver. >>> To align with the drivers logic to have high precision by default >>> a boolean sensirion,low_precision is used to switch to low precision. >>> >>> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> >>> --- >>> .../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++ >>> 1 file changed, 57 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml >>> >> >> >> My bot found errors running 'make dt_binding_check' on your patch: >> >> Error: >> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:25.13-14 >> syntax error >> FATAL ERROR: Unable to parse input tree >> scripts/Makefile.lib:315: recipe for target >> 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml' failed >> make[1]: *** >> [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml] Error 1 >> make[1]: *** Waiting for unfinished jobs.... >> Makefile:1347: recipe for target 'dt_binding_check' failed >> make: *** [dt_binding_check] Error 2 >> >> >> See https://patchwork.ozlabs.org/patch/1326414 >> >> If you already ran 'make dt_binding_check' and didn't see the above >> error(s), then make sure dt-schema is up to date: >> >> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade >> >> Please check and re-submit. >> > > Hi Rob, > > I did run the test and didn't had any Error. dt-schema 2020.06 installed from > git. pip3 install -e. > > Can you help? > > Chris Solved, missing ";" behind reg = <0x70> will resend. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-11 23:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-07-10 2:15 [PATCH v5 0/2] shtc1: add support for device tree bindings Chris Ruehl 2020-07-10 2:15 ` [PATCH v5 1/2] hwmon: " Chris Ruehl 2020-07-10 2:15 ` [PATCH v5 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl 2020-07-10 16:31 ` Rob Herring 2020-07-11 10:05 ` Chris Ruehl 2020-07-11 23:59 ` Chris Ruehl
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).