From: Tony Lindgren <tony@atomide.com>
To: Suman Anna <s-anna@ti.com>
Cc: linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Tero Kristo <t-kristo@ti.com>
Subject: Re: [PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5
Date: Fri, 10 Jul 2020 10:59:07 -0700 [thread overview]
Message-ID: <20200710175907.GH5849@atomide.com> (raw)
In-Reply-To: <4602b219-6822-4ebc-66c6-c64740793938@ti.com>
* Suman Anna <s-anna@ti.com> [200710 17:29]:
> FYI, the following one-line removal is enough for me to not see the error.
>
> diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
> index 86f1ac4c2412..b80c9dff81c4 100644
> --- a/arch/arm/mach-omap2/vc.c
> +++ b/arch/arm/mach-omap2/vc.c
> @@ -44,7 +44,6 @@
> #define OMAP4_VDD_DEFAULT_VAL \
> (OMAP4430_VDD_I2C_DISABLE_MASK | \
> OMAP4430_VDD_IVA_PRESENCE | OMAP4430_VDD_MPU_PRESENCE | \
> - OMAP4430_AUTO_CTRL_VDD_IVA(OMAP4430_AUTO_CTRL_VDD_RET) | \
> OMAP4430_AUTO_CTRL_VDD_MPU(OMAP4430_AUTO_CTRL_VDD_RET) | \
> OMAP4430_AUTO_CTRL_VDD_CORE(OMAP4430_AUTO_CTRL_VDD_RET))
>
OK.
Below is an untested attempt to sync the 4460 opp values with
what earlier TI kernels had. Not sure if this help, might be worth
testing :) My pandaboard-es seems to have a corrupt sdio card.
Regards,
Tony
8< ---------------------
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -66,21 +66,23 @@ struct omap_volt_data omap443x_vdd_core_volt_data[] = {
};
#define OMAP4460_VDD_MPU_OPP50_UV 1025000
-#define OMAP4460_VDD_MPU_OPP100_UV 1200000
-#define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000
-#define OMAP4460_VDD_MPU_OPPNITRO_UV 1375000
+#define OMAP4460_VDD_MPU_OPP100_UV 1203000
+#define OMAP4460_VDD_MPU_OPPTURBO_UV 1317000
+#define OMAP4460_VDD_MPU_OPPNITRO_UV 1380000
+#define OMAP4460_VDD_MPU_OPPNITROSB_UV 1390000
struct omap_volt_data omap446x_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
-#define OMAP4460_VDD_IVA_OPP50_UV 1025000
-#define OMAP4460_VDD_IVA_OPP100_UV 1200000
-#define OMAP4460_VDD_IVA_OPPTURBO_UV 1313000
+#define OMAP4460_VDD_IVA_OPP50_UV 950000
+#define OMAP4460_VDD_IVA_OPP100_UV 1140000
+#define OMAP4460_VDD_IVA_OPPTURBO_UV 1291000
#define OMAP4460_VDD_IVA_OPPNITRO_UV 1375000
struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
@@ -91,8 +93,8 @@ struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
-#define OMAP4460_VDD_CORE_OPP50_UV 1025000
-#define OMAP4460_VDD_CORE_OPP100_UV 1200000
+#define OMAP4460_VDD_CORE_OPP50_UV 962000
+#define OMAP4460_VDD_CORE_OPP100_UV 1127000
#define OMAP4460_VDD_CORE_OPP100_OV_UV 1250000
struct omap_volt_data omap446x_vdd_core_volt_data[] = {
--
2.27.0
next prev parent reply other threads:[~2020-07-10 17:59 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 23:19 [PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5 Suman Anna
2020-07-09 23:19 ` [PATCH 01/13] ARM: dts: omap4: Add timer_sys_ck clocks for timers Suman Anna
2020-07-09 23:19 ` [PATCH 02/13] ARM: dts: omap5: " Suman Anna
2020-07-09 23:19 ` [PATCH 03/13] ARM: dts: omap4: Update the DSP node Suman Anna
2020-07-09 23:19 ` [PATCH 04/13] ARM: dts: omap4: Add IPU DT node Suman Anna
2020-07-09 23:19 ` [PATCH 05/13] ARM: dts: omap4: Add aliases for rproc nodes Suman Anna
2020-07-09 23:19 ` [PATCH 06/13] ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP Suman Anna
2020-08-12 5:31 ` Guillaume Tucker
2020-08-14 14:32 ` Guillaume Tucker
2020-08-14 15:26 ` Suman Anna
2020-08-14 16:33 ` Guillaume Tucker
2020-08-14 19:33 ` Suman Anna
2020-08-20 9:17 ` Guillaume Tucker
2020-07-09 23:19 ` [PATCH 07/13] ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU Suman Anna
2020-07-09 23:19 ` [PATCH 08/13] ARM: dts: omap5: Add DSP and IPU nodes Suman Anna
2020-07-09 23:19 ` [PATCH 09/13] ARM: dts: omap5: Add aliases for rproc nodes Suman Anna
2020-07-09 23:19 ` [PATCH 10/13] ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP Suman Anna
2020-07-09 23:19 ` [PATCH 11/13] ARM: dts: omap5-uevm: Add system timers to DSP and IPU Suman Anna
2020-07-09 23:19 ` [PATCH 12/13] ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP Suman Anna
2020-07-09 23:19 ` [PATCH 13/13] ARM: dts: omap5-uevm: " Suman Anna
2020-07-10 16:58 ` [PATCH 00/13] Add IPU & DSP remoteprocs on OMAP4 and OMAP5 Tony Lindgren
2020-07-10 17:17 ` Suman Anna
2020-07-10 17:28 ` Suman Anna
2020-07-10 17:59 ` Tony Lindgren [this message]
2020-07-10 18:29 ` Suman Anna
2020-07-10 20:45 ` Suman Anna
2020-07-10 22:08 ` Tony Lindgren
2020-07-10 17:40 ` Tony Lindgren
2020-07-10 18:24 ` Suman Anna
2020-07-13 18:24 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200710175907.GH5849@atomide.com \
--to=tony@atomide.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).