[PATCH 1/2] arm64: dts: lx2160a: add dspi controller DT nodes

[PATCH 1/2] arm64: dts: lx2160a: add dspi controller DT nodes

[Qiang Zhao]

From: Chuanhua Han <chuanhua.han@nxp.com>

Add the dspi support on lx2160

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 ++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index abaeb58..f56172f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -777,6 +777,45 @@
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
 		esdhc0: esdhc@2140000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
-- 
2.7.4

[PATCH 2/2] arm64: dts: lx2160a: add DT node for all DSPI controller

[Qiang Zhao]

From: Chuanhua Han <chuanhua.han@nxp.com>

Add device tree node for first flash (CS0) connected
to all dspi controller.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 36 +++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 3b88e1e..2d1fe6c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -35,6 +35,42 @@
 	status = "okay";
 };
 
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &esdhc0 {
 	status = "okay";
 };
-- 
2.7.4

Re: [PATCH 1/2] arm64: dts: lx2160a: add dspi controller DT nodes

[Shawn Guo]

On Mon, Jun 22, 2020 at 04:17:51PM +0800, Qiang Zhao wrote:
> From: Chuanhua Han <chuanhua.han@nxp.com>
> 
> Add the dspi support on lx2160
> 
> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
> Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>

Applied both, thanks.