* [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio
@ 2020-07-06 17:33 Marcin Sloniewski
2020-07-06 17:33 ` [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible Marcin Sloniewski
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Marcin Sloniewski @ 2020-07-06 17:33 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Marcin Sloniewski, Rob Herring, Maxime Coquelin, Alexandre Torgue,
Manivannan Sadhasivam, Ahmad Fatoum, Sam Ravnborg, Linus Walleij,
Heiko Stuebner, Stephan Gerhold, Lubomir Rintel, Mark Brown,
allen, devicetree, linux-stm32, linux-kernel
Add the "seeed" vendor prefix for Seeed Technology Co., Ltd
Website: https://www.seeedstudio.com/
Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9aeab66be85f..7dd03b3e9d3c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -902,6 +902,8 @@ patternProperties:
description: Schindler
"^seagate,.*":
description: Seagate Technology PLC
+ "^seeed,.*":
+ description: Seeed Technology Co., Ltd
"^seirobotics,.*":
description: Shenzhen SEI Robotics Co., Ltd
"^semtech,.*":
--
2.26.2
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible 2020-07-06 17:33 [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Marcin Sloniewski @ 2020-07-06 17:33 ` Marcin Sloniewski 2020-07-15 22:04 ` Rob Herring 2020-07-06 17:33 ` [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board Marcin Sloniewski 2020-07-15 22:03 ` [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Rob Herring 2 siblings, 1 reply; 6+ messages in thread From: Marcin Sloniewski @ 2020-07-06 17:33 UTC (permalink / raw) To: linux-arm-kernel Cc: Marcin Sloniewski, Rob Herring, Maxime Coquelin, Alexandre Torgue, Manivannan Sadhasivam, Ahmad Fatoum, Sam Ravnborg, Linus Walleij, Stephan Gerhold, Heiko Stuebner, Lubomir Rintel, Mark Brown, allen, devicetree, linux-stm32, linux-kernel Document device tree bindings of Seeed SoM and carrier board. Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> --- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index 790e6dd48e34..22b9aaa75eee 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -39,6 +39,8 @@ properties: - enum: - arrow,stm32mp157a-avenger96 # Avenger96 - lxa,stm32mp157c-mc1 + - seeed,stm32mp157c-odyssey + - seeed,stm32mp157c-odyssey-som - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 -- 2.26.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible 2020-07-06 17:33 ` [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible Marcin Sloniewski @ 2020-07-15 22:04 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2020-07-15 22:04 UTC (permalink / raw) To: Marcin Sloniewski Cc: Linus Walleij, Ahmad Fatoum, linux-kernel, linux-stm32, linux-arm-kernel, Manivannan Sadhasivam, Rob Herring, Sam Ravnborg, devicetree, Mark Brown, Stephan Gerhold, Heiko Stuebner, allen, Lubomir Rintel, Alexandre Torgue, Maxime Coquelin On Mon, 06 Jul 2020 19:33:48 +0200, Marcin Sloniewski wrote: > Document device tree bindings of Seeed SoM and carrier board. > > Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> > --- > Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board 2020-07-06 17:33 [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Marcin Sloniewski 2020-07-06 17:33 ` [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible Marcin Sloniewski @ 2020-07-06 17:33 ` Marcin Sloniewski 2020-07-21 9:26 ` Alexandre Torgue 2020-07-15 22:03 ` [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Rob Herring 2 siblings, 1 reply; 6+ messages in thread From: Marcin Sloniewski @ 2020-07-06 17:33 UTC (permalink / raw) To: linux-arm-kernel Cc: Marcin Sloniewski, Rob Herring, Maxime Coquelin, Alexandre Torgue, Manivannan Sadhasivam, Ahmad Fatoum, Sam Ravnborg, Linus Walleij, Heiko Stuebner, Stephan Gerhold, Lubomir Rintel, Mark Brown, allen, devicetree, linux-stm32, linux-kernel Add support for Seeed Studio's stm32mp157c odyssey board. Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM and carrier board with USB and ETH interfaces, SD card connector, wifi and BT chip AP6236. In this patch only basic kernel boot is supported and interfacing SD card and on-board eMMC. Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> --- .../arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 276 ++++++++++++++++++ arch/arm/boot/dts/stm32mp157c-odyssey.dts | 72 +++++ 2 files changed, 348 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey.dts diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 000000000000..620ff9e7f370 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Seeed Studio Odyssey-STM32MP157C SOM"; + compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + memory@c0000000 { + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts new file mode 100644 index 000000000000..6c1b091af14f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + -- 2.26.2 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board 2020-07-06 17:33 ` [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board Marcin Sloniewski @ 2020-07-21 9:26 ` Alexandre Torgue 0 siblings, 0 replies; 6+ messages in thread From: Alexandre Torgue @ 2020-07-21 9:26 UTC (permalink / raw) To: Marcin Sloniewski, linux-arm-kernel Cc: Rob Herring, Maxime Coquelin, Manivannan Sadhasivam, Ahmad Fatoum, Sam Ravnborg, Linus Walleij, Heiko Stuebner, Stephan Gerhold, Lubomir Rintel, Mark Brown, allen, devicetree, linux-stm32, linux-kernel Hi Marcin, On 7/6/20 7:33 PM, Marcin Sloniewski wrote: > Add support for Seeed Studio's stm32mp157c odyssey board. > Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM > and carrier board with USB and ETH interfaces, SD card connector, > wifi and BT chip AP6236. > > In this patch only basic kernel boot is supported and interfacing > SD card and on-board eMMC. > > Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> Thanks for adding a new STM32MP157 board. Nothing to say about your DT patchs except that Makefile update is missing. regards Alex > --- > .../arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 276 ++++++++++++++++++ > arch/arm/boot/dts/stm32mp157c-odyssey.dts | 72 +++++ > 2 files changed, 348 insertions(+) > create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey.dts > > diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi > new file mode 100644 > index 000000000000..620ff9e7f370 > --- /dev/null > +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi > @@ -0,0 +1,276 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. > + */ > + > +/dts-v1/; > + > +#include "stm32mp157.dtsi" > +#include "stm32mp15xc.dtsi" > +#include "stm32mp15-pinctrl.dtsi" > +#include "stm32mp15xxac-pinctrl.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/mfd/st,stpmic1.h> > + > +/ { > + model = "Seeed Studio Odyssey-STM32MP157C SOM"; > + compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; > + > + memory@c0000000 { > + reg = <0xc0000000 0x20000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + mcuram2: mcuram2@10000000 { > + compatible = "shared-dma-pool"; > + reg = <0x10000000 0x40000>; > + no-map; > + }; > + > + vdev0vring0: vdev0vring0@10040000 { > + compatible = "shared-dma-pool"; > + reg = <0x10040000 0x1000>; > + no-map; > + }; > + > + vdev0vring1: vdev0vring1@10041000 { > + compatible = "shared-dma-pool"; > + reg = <0x10041000 0x1000>; > + no-map; > + }; > + > + vdev0buffer: vdev0buffer@10042000 { > + compatible = "shared-dma-pool"; > + reg = <0x10042000 0x4000>; > + no-map; > + }; > + > + mcuram: mcuram@30000000 { > + compatible = "shared-dma-pool"; > + reg = <0x30000000 0x40000>; > + no-map; > + }; > + > + retram: retram@38000000 { > + compatible = "shared-dma-pool"; > + reg = <0x38000000 0x10000>; > + no-map; > + }; > + > + gpu_reserved: gpu@d4000000 { > + reg = <0xd4000000 0x4000000>; > + no-map; > + }; > + }; > + > + led { > + compatible = "gpio-leds"; > + blue { > + label = "heartbeat"; > + gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + }; > +}; > + > +&gpu { > + contiguous-area = <&gpu_reserved>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins_a>; > + i2c-scl-rising-time-ns = <185>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + /* spare dmas for other usage */ > + /delete-property/dmas; > + /delete-property/dma-names; > + > + pmic: stpmic@33 { > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + status = "okay"; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + ldo1-supply = <&v3v3>; > + ldo3-supply = <&vdd_ddr>; > + ldo6-supply = <&v3v3>; > + pwr_sw1-supply = <&bst_out>; > + pwr_sw2-supply = <&bst_out>; > + > + vddcore: buck1 { > + regulator-name = "vddcore"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd_ddr: buck2 { > + regulator-name = "vdd_ddr"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd: buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + st,mask-reset; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + v3v3: buck4 { > + regulator-name = "v3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-over-current-protection; > + regulator-initial-mode = <0>; > + }; > + > + v1v8_audio: ldo1 { > + regulator-name = "v1v8_audio"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + interrupts = <IT_CURLIM_LDO1 0>; > + }; > + > + v3v3_hdmi: ldo2 { > + regulator-name = "v3v3_hdmi"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + interrupts = <IT_CURLIM_LDO2 0>; > + }; > + > + vtt_ddr: ldo3 { > + regulator-name = "vtt_ddr"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <750000>; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + vdd_usb: ldo4 { > + regulator-name = "vdd_usb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + interrupts = <IT_CURLIM_LDO4 0>; > + }; > + > + vdda: ldo5 { > + regulator-name = "vdda"; > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + interrupts = <IT_CURLIM_LDO5 0>; > + regulator-boot-on; > + }; > + > + v1v2_hdmi: ldo6 { > + regulator-name = "v1v2_hdmi"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + interrupts = <IT_CURLIM_LDO6 0>; > + }; > + > + vref_ddr: vref_ddr { > + regulator-name = "vref_ddr"; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + bst_out: boost { > + regulator-name = "bst_out"; > + interrupts = <IT_OCP_BOOST 0>; > + }; > + > + vbus_otg: pwr_sw1 { > + regulator-name = "vbus_otg"; > + interrupts = <IT_OCP_OTG 0>; > + }; > + > + vbus_sw: pwr_sw2 { > + regulator-name = "vbus_sw"; > + interrupts = <IT_OCP_SWOUT 0>; > + regulator-active-discharge; > + }; > + }; > + > + onkey { > + compatible = "st,stpmic1-onkey"; > + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; > + interrupt-names = "onkey-falling", "onkey-rising"; > + power-off-time-sec = <10>; > + status = "okay"; > + }; > + > + watchdog { > + compatible = "st,stpmic1-wdt"; > + status = "disabled"; > + }; > + }; > +}; > + > +&ipcc { > + status = "okay"; > +}; > + > +&iwdg2 { > + timeout-sec = <32>; > + status = "okay"; > +}; > + > +&m4_rproc { > + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, > + <&vdev0vring1>, <&vdev0buffer>; > + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; > + mbox-names = "vq0", "vq1", "shutdown"; > + interrupt-parent = <&exti>; > + interrupts = <68 1>; > + status = "okay"; > +}; > + > +&rng1 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&sdmmc2 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; > + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; > + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; > + non-removable; > + no-sd; > + no-sdio; > + st,neg-edge; > + bus-width = <4>; > + vmmc-supply = <&v3v3>; > + vqmmc-supply = <&v3v3>; > + mmc-ddr-3_3v; > + status = "okay"; > +}; > + > diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts > new file mode 100644 > index 000000000000..6c1b091af14f > --- /dev/null > +++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. > + */ > + > +/dts-v1/; > + > +#include "stm32mp157c-odyssey-som.dtsi" > + > +/ { > + model = "Seeed Studio Odyssey-STM32MP157C Board"; > + compatible = "seeed,stm32mp157c-odyssey", "st,stm32mp157"; > + > + aliases { > + ethernet0 = ðernet0; > + serial0 = &uart4; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +ðernet0 { > + status = "okay"; > + pinctrl-0 = <ðernet0_rgmii_pins_a>; > + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; > + pinctrl-names = "default", "sleep"; > + phy-mode = "rgmii-id"; > + max-speed = <1000>; > + phy-handle = <&phy0>; > + > + mdio0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "snps,dwmac-mdio"; > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&i2c1_pins_a>; > + pinctrl-1 = <&i2c1_pins_sleep_a>; > + i2c-scl-rising-time-ns = <100>; > + i2c-scl-falling-time-ns = <7>; > + status = "okay"; > + /delete-property/dmas; > + /delete-property/dma-names; > +}; > + > +&sdmmc1 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc1_b4_pins_a>; > + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; > + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; > + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > + disable-wp; > + st,neg-edge; > + bus-width = <4>; > + vmmc-supply = <&v3v3>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart4_pins_a>; > + status = "okay"; > +}; > + > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio 2020-07-06 17:33 [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Marcin Sloniewski 2020-07-06 17:33 ` [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible Marcin Sloniewski 2020-07-06 17:33 ` [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board Marcin Sloniewski @ 2020-07-15 22:03 ` Rob Herring 2 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2020-07-15 22:03 UTC (permalink / raw) To: Marcin Sloniewski Cc: Heiko Stuebner, devicetree, Manivannan Sadhasivam, Maxime Coquelin, Rob Herring, linux-stm32, Mark Brown, Lubomir Rintel, allen, linux-kernel, Sam Ravnborg, Alexandre Torgue, linux-arm-kernel, Ahmad Fatoum, Linus Walleij, Stephan Gerhold On Mon, 06 Jul 2020 19:33:47 +0200, Marcin Sloniewski wrote: > Add the "seeed" vendor prefix for Seeed Technology Co., Ltd > Website: https://www.seeedstudio.com/ > > Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-21 9:27 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-07-06 17:33 [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Marcin Sloniewski 2020-07-06 17:33 ` [PATCH 2/3] dt-bindings: arm: stm32: document Odyssey compatible Marcin Sloniewski 2020-07-15 22:04 ` Rob Herring 2020-07-06 17:33 ` [PATCH 3/3] ARM: dts: stm32: add initial support for stm32mp157-odyssey board Marcin Sloniewski 2020-07-21 9:26 ` Alexandre Torgue 2020-07-15 22:03 ` [PATCH 1/3] dt-bindings: vendor-prefixes: add Seeed Studio Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).