From: Vinod Koul <vkoul@kernel.org>
To: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] phy: socionext: Add UniPhier AHCI PHY driver support
Date: Thu, 16 Jul 2020 12:07:50 +0530 [thread overview]
Message-ID: <20200716063750.GH55478@vkoul-mobl> (raw)
In-Reply-To: <1594867382-27509-3-git-send-email-hayashi.kunihiko@socionext.com>
On 16-07-20, 11:43, Kunihiko Hayashi wrote:
> +static int uniphier_ahciphy_pxs3_init(struct uniphier_ahciphy_priv *priv)
> +{
> + int i;
> + u32 val;
> +
> + /* setup port parameter */
> + val = readl(priv->base + TXCTRL0);
> + val &= ~TXCTRL0_AMP_G3_MASK;
> + val |= FIELD_PREP(TXCTRL0_AMP_G3_MASK, 0x73);
> + val &= ~TXCTRL0_AMP_G2_MASK;
> + val |= FIELD_PREP(TXCTRL0_AMP_G2_MASK, 0x46);
> + val &= ~TXCTRL0_AMP_G1_MASK;
> + val |= FIELD_PREP(TXCTRL0_AMP_G1_MASK, 0x42);
> + writel(val, priv->base + TXCTRL0);
> +
> + val = readl(priv->base + TXCTRL1);
> + val &= ~TXCTRL1_DEEMPH_G3_MASK;
> + val |= FIELD_PREP(TXCTRL1_DEEMPH_G3_MASK, 0x23);
> + val &= ~TXCTRL1_DEEMPH_G2_MASK;
> + val |= FIELD_PREP(TXCTRL1_DEEMPH_G2_MASK, 0x05);
> + val &= ~TXCTRL1_DEEMPH_G1_MASK;
> + val |= FIELD_PREP(TXCTRL1_DEEMPH_G1_MASK, 0x05);
> +
> + val = readl(priv->base + RXCTRL);
> + val &= ~RXCTRL_LOS_LVL_MASK;
> + val |= FIELD_PREP(RXCTRL_LOS_LVL_MASK, 0x9);
> + val &= ~RXCTRL_LOS_BIAS_MASK;
> + val |= FIELD_PREP(RXCTRL_LOS_BIAS_MASK, 0x2);
> + val &= ~RXCTRL_RX_EQ_MASK;
> + val |= FIELD_PREP(RXCTRL_RX_EQ_MASK, 0x1);
> +
> + /* dummy read 25 times to make a wait time for the phy to stablize */
s/stablize/stabilize
> +static int uniphier_ahciphy_power_off(struct phy *phy)
> +{
> + struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
> + int ret = 0;
> +
> + if (priv->data->power_off)
> + ret = priv->data->power_off(priv);
> +
> + reset_control_assert(priv->rst);
> + clk_disable_unprepare(priv->clk);
> +
> + return ret;
> +}
> +
> +
multiple blank lines
> +static const struct phy_ops uniphier_ahciphy_ops = {
> + .init = uniphier_ahciphy_init,
> + .exit = uniphier_ahciphy_exit,
> + .power_on = uniphier_ahciphy_power_on,
> + .power_off = uniphier_ahciphy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int uniphier_ahciphy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct uniphier_ahciphy_priv *priv;
> + struct phy *phy;
> + struct phy_provider *phy_provider;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + priv->data = of_device_get_match_data(dev);
> + if (WARN_ON(!priv->data))
> + return -EINVAL;
> +
> + priv->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->clk_parent = devm_clk_get(dev, "link");
> + if (IS_ERR(priv->clk_parent))
> + return PTR_ERR(priv->clk_parent);
> +
> + if (priv->data->is_phy_clk) {
> + priv->clk = devm_clk_get(dev, "phy");
> + if (IS_ERR(priv->clk))
> + return PTR_ERR(priv->clk);
> + }
> +
> + priv->rst_parent = devm_reset_control_get_shared(dev, "link");
> + if (IS_ERR(priv->rst_parent))
> + return PTR_ERR(priv->rst_parent);
> +
> + priv->rst = devm_reset_control_get_shared(dev, "phy");
> + if (IS_ERR(priv->rst))
> + return PTR_ERR(priv->rst);
> +
> + phy = devm_phy_create(dev, dev->of_node, &uniphier_ahciphy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create phy\n");
> + return PTR_ERR(phy);
> + }
> +
> + phy_set_drvdata(phy, priv);
> + phy_provider = devm_of_phy_provider_register(dev,
> + of_phy_simple_xlate);
single line?
--
~Vinod
next prev parent reply other threads:[~2020-07-16 6:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-16 2:43 [PATCH v3 0/2] Add new UniPhier AHCI PHY driver Kunihiko Hayashi
2020-07-16 2:43 ` [PATCH v3 1/2] dt-bindings: phy: Add UniPhier AHCI PHY description Kunihiko Hayashi
2020-07-16 2:43 ` [PATCH v3 2/2] phy: socionext: Add UniPhier AHCI PHY driver support Kunihiko Hayashi
2020-07-16 6:37 ` Vinod Koul [this message]
2020-07-16 7:03 ` Kunihiko Hayashi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200716063750.GH55478@vkoul-mobl \
--to=vkoul@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hayashi.kunihiko@socionext.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox