From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9E3ACC433E1 for ; Thu, 16 Jul 2020 15:25:24 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7C2852076A for ; Thu, 16 Jul 2020 15:25:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1594913124; bh=9+40yAt/nYgZCf//uFqEotTulKNXYearIODt1X6941Y=; h=Date:From:To:Cc:Subject:References:In-Reply-To:List-ID:From; b=2CZaWY6VEs1Ic31NEp8R62mRpytOB3GHSqxjnzCLTzUArPepC9UREAwAsxavF1wo7 PPyRq6hp27ngRyVGp6nRFabvl6mc45/qkBcLDbF6PwQaiP/Qb5ISmpe3okOJcIzwcC ssRREkGI8U0UHlgFEXiTqTJ6aqg3ohXoZW7+h5rk= Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728714AbgGPPZY (ORCPT ); Thu, 16 Jul 2020 11:25:24 -0400 Received: from mail-il1-f194.google.com ([209.85.166.194]:33898 "EHLO mail-il1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728182AbgGPPZX (ORCPT ); Thu, 16 Jul 2020 11:25:23 -0400 Received: by mail-il1-f194.google.com with SMTP id t4so5413282iln.1; Thu, 16 Jul 2020 08:25:22 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:content-transfer-encoding :in-reply-to; bh=+8sCFotjHvcqhcaFqEJm3//tlFTHSiLL36jSVd2F5HE=; b=T5ijFrwRfyuwoDV13BZZHj+YhSREKzq1goicXuBjwBkBemzBjhNj9L9qck27Gkztb1 dwmZlDbJLDA1G1qZci7+GISr/xYTXm356k0n5e41dYXXk6l6AMBRrHHGZgArVFUqSwfl 0dAmxVlcM0qmTCeyGI/FFB+0BjxsBK2TnKf0idtBPNYXPVIwNcA7NWUCHgeJExX9Kec/ SpRmb7e6KQMTZmFjcoEDZlF4RpyDSbQzGFSq49o8e/aNGtQNOySnxZ8XZEAkLR7tmDDt TRcOrFib6Lbkr+jCMPb87+8rMm00vzOEjDSsDT3348KN5H0vSOlm1nhEDhxFpmSfjpZA wCQg== X-Gm-Message-State: AOAM531lN5/klnR+LKrXNrMdQqQrSLGW8ltwi2O4rJh9nDpUux4LyLtb YncfsQPLE/9O0QeOtd6OUw== X-Google-Smtp-Source: ABdhPJwn6vFzj1XNYFeW1m4BKLuhwFnyytZX9Cw/iMShPrTEdtRLc4LiWXYdfH8C0ZpSgSVU5E/RaQ== X-Received: by 2002:a92:41d2:: with SMTP id o201mr4910551ila.298.1594913121556; Thu, 16 Jul 2020 08:25:21 -0700 (PDT) Received: from xps15 ([64.188.179.252]) by smtp.gmail.com with ESMTPSA id a13sm2784409ilk.19.2020.07.16.08.25.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 16 Jul 2020 08:25:21 -0700 (PDT) Received: (nullmailer pid 2369449 invoked by uid 1000); Thu, 16 Jul 2020 15:25:20 -0000 Date: Thu, 16 Jul 2020 09:25:20 -0600 From: Rob Herring To: Niklas =?iso-8859-1?Q?S=F6derlund?= Cc: Hans Verkuil , devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: Re: [PATCH v2 2/3] dt-bindings: adv7604: Convert bindings to json-schema Message-ID: <20200716152520.GA2351503@bogus> References: <20200715091455.1772470-1-niklas.soderlund+renesas@ragnatech.se> <20200715091455.1772470-3-niklas.soderlund+renesas@ragnatech.se> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20200715091455.1772470-3-niklas.soderlund+renesas@ragnatech.se> Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Wed, Jul 15, 2020 at 11:14:54AM +0200, Niklas Söderlund wrote: > Convert ADV7604 video decoder documentation to json-schema. > > Signed-off-by: Niklas Söderlund > --- > * Changes since v1 > - Simplify enum for reg-names. > --- > .../devicetree/bindings/media/i2c/adv7604.txt | 87 ---------- > .../bindings/media/i2c/adv7604.yaml | 161 ++++++++++++++++++ > 2 files changed, 161 insertions(+), 87 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/i2c/adv7604.txt > create mode 100644 Documentation/devicetree/bindings/media/i2c/adv7604.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt > deleted file mode 100644 > index 8c7cdc7cd7aaebc8..0000000000000000 > --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt > +++ /dev/null > @@ -1,87 +0,0 @@ > -* Analog Devices ADV7604/11/12 video decoder with HDMI receiver > - > -The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated > -HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog > -input, and the ADV7611 has one HDMI input and no analog input. The 7612 is > -similar to the 7611 but has 2 HDMI inputs. > - > -These device tree bindings support the ADV7611/12 only at the moment. > - > -Required Properties: > - > - - compatible: Must contain one of the following > - - "adi,adv7611" for the ADV7611 > - - "adi,adv7612" for the ADV7612 > - > - - reg: I2C slave addresses > - The ADV76xx has up to thirteen 256-byte maps that can be accessed via the > - main I2C ports. Each map has it own I2C address and acts as a standard > - slave device on the I2C bus. The main address is mandatory, others are > - optional and revert to defaults if not specified. You've lost this detail which either as a schema or freeform text seems important.. > - > -The device node must contain one 'port' child node per device input and output > -port, in accordance with the video interface bindings defined in > -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes > -are numbered as follows. > - > - Port ADV7611 ADV7612 > ------------------------------------------------------------- > - HDMI 0 0, 1 > - Digital output 1 2 > - > -The digital output port node must contain at least one endpoint. > - > -Optional Properties: > - > - - hpd-gpios: References to the GPIOs that control the HDMI hot-plug > - detection pins, one per HDMI input. The active flag indicates the GPIO > - level that enables hot-plug detection. > - - reset-gpios: Reference to the GPIO connected to the device's reset pin. > - - default-input: Select which input is selected after reset. > - - reg-names : Names of maps with programmable addresses. > - It can contain any map needing a non-default address. > - Possible maps names are : > - "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe", > - "rep", "edid", "hdmi", "test", "cp", "vdp" > - > -Optional Endpoint Properties: > - > - The following three properties are defined in video-interfaces.txt and are > - valid for source endpoints only. > - > - - hsync-active: Horizontal synchronization polarity. Defaults to active low. > - - vsync-active: Vertical synchronization polarity. Defaults to active low. > - - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge. > - > - If none of hsync-active, vsync-active and pclk-sample is specified the > - endpoint will use embedded BT.656 synchronization. > - > -Example: > - > - hdmi_receiver@4c { > - compatible = "adi,adv7611"; > - /* > - * The edid page will be accessible @ 0x66 on the I2C bus. All > - * other maps will retain their default addresses. > - */ > - reg = <0x4c>, <0x66>; > - reg-names = "main", "edid"; > - > - reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; > - hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; > - > - #address-cells = <1>; > - #size-cells = <0>; > - > - default-input = <0>; > - > - port@0 { > - reg = <0>; > - }; > - port@1 { > - reg = <1>; > - hdmi_in: endpoint { > - remote-endpoint = <&ccdc_in>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml > new file mode 100644 > index 0000000000000000..b585745b66d70ac9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml > @@ -0,0 +1,161 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices ADV7604/11/12 video decoder with HDMI receiver > + > +maintainers: > + - Hans Verkuil > + > +description: > + The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated > + HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog > + input, and the ADV7611 has one HDMI input and no analog input. The 7612 is > + similar to the 7611 but has 2 HDMI inputs. > + > + These device tree bindings support the ADV7611/12 only at the moment. > + > +properties: > + compatible: > + items: > + - enum: > + - adi,adv7611 > + - adi,adv7612 > + > + reg: > + minItems: 1 > + maxItems: 13 > + > + reg-names: > + minItems: 1 > + maxItems: 13 > + items: > + enum: [ main, avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ] > + > + reset-gpios: > + maxItems: 1 > + > + hpd-gpios: > + minItems: 1 > + description: > + References to the GPIOs that control the HDMI hot-plug detection pins, > + one per HDMI input. The active flag indicates the GPIO level that > + enables hot-plug detection. > + > + default-input: > + maxItems: 1 > + description: > + Select which input is selected after reset. > + > + ports: > + type: object > + description: > + A node containing input and output port nodes with endpoint definitions > + as documented in > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > +required: > + - compatible > + - reg Add: additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: adi,adv7611 > + then: > + properties: > + ports: > + properties: > + '#address-cells': > + const: 1 > + '#size-cells': > + const: 0 > + port@0: > + type: object > + description: Input port > + port@1: > + type: object > + description: Output port > + > + required: > + - port@1 > + > + additionalProperties: false > + > + required: > + - ports > + > + - if: > + properties: > + compatible: > + contains: > + const: adi,adv7612 > + then: > + properties: > + ports: > + properties: > + '#address-cells': > + const: 1 > + '#size-cells': > + const: 0 > + port@2: > + type: object > + description: Output port > + > + patternProperties: > + "^port@[0-1]$": > + type: object > + description: Input port > + > + required: > + - port@2 > + > + additionalProperties: false > + > + required: > + - ports > + > +examples: > + - | > + #include > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + hdmi_receiver@4c { > + compatible = "adi,adv7611"; > + /* > + * The edid page will be accessible @ 0x66 on the I2C bus. All > + * other maps will retain their default addresses. > + */ > + reg = <0x4c>, <0x66>; > + reg-names = "main", "edid"; > + > + reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; > + hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; > + default-input = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + }; > + > + port@1 { > + reg = <1>; > + hdmi_in: endpoint { > + remote-endpoint = <&ccdc_in>; > + }; > + }; > + }; > + > + > + }; > + }; > -- > 2.27.0 >