From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tom Joseph <tjoseph@cadence.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v8 00/15] Add PCIe support to TI's J721E SoC
Date: Thu, 23 Jul 2020 11:02:58 +0100 [thread overview]
Message-ID: <20200723100258.GA7195@e121166-lin.cambridge.arm.com> (raw)
In-Reply-To: <20200722110317.4744-1-kishon@ti.com>
On Wed, Jul 22, 2020 at 04:33:02PM +0530, Kishon Vijay Abraham I wrote:
> TI's J721E SoC uses Cadence PCIe core to implement both RC mode
> and EP mode.
>
> The high level features are:
> *) Supports Legacy, MSI and MSI-X interrupt
> *) Supports upto GEN4 speed mode
> *) Supports SR-IOV
> *) Supports multiple physical function
> *) Ability to route all transactions via SMMU
>
> This patch series
> *) Add support in Cadence PCIe core to be used for TI's J721E SoC
> *) Add a driver for J721E PCIe wrapper
>
> v1 of the series can be found @ [1]
> v2 of the series can be found @ [2]
> v3 of the series can be found @ [5]
> v4 of the series can be found @ [6]
> v5 of the series can be found @ [7]
> v6 of the series can be found @ [8]
> v7 of the series can be found @ [9]
>
> Changes from v7:
> 1) Replaced WARN with pr_warn
> 2) Included support for "dma-ranges" property patch in this series [10]
>
> Changes from v6:
> 1) Fixed bot found errors running 'make dt_binding_check'
>
> Changes from v5:
> 1) Added Reviewed-by: for PATCH #6
> 2) Protect writes to PCI_STATUS with spin_lock during raising interrupts
> in EP mode to reduce the time between read and write of RMW.
>
> Changes from v4:
> 1) Added Reviewed-by: & Acked-by: tags from RobH
> 2) Removed un-used accessors for pcie-cadence.h and removed having ops
> for read/write accessors
> 3) Updated cdns,cdns-pcie-host.yaml to remove "mem" from reg
>
> Changes from v3:
> 1) Changed the order of files in MAINTAINTERS file to fix Joe's comments
> 2) Fixed indentation and added Reviewed-by: Rob Herring <robh@kernel.org>
> 3) Cleaned up computing msix_tbl
> 4) Fixed RobH's comment on J721E driver
>
> Changes from v2:
> 1) Converting Cadence binding to YAML schema was done as a
> separate series [3] & [4]. [3] is merged and [4] is
> pending.
> 2) Included MSI-X support in this series
> 3) Added link down interrupt handling (only error message)
> 4) Rebased to latest 5.7-rc1
> 5) Adapted TI J721E binding to [3] & [4]
>
> Changes from v1:
> 1) Added DT schemas cdns-pcie-host.yaml, cdns-pcie-ep.yaml and
> cdns-pcie.yaml for Cadence PCIe core and included it in
> TI's PCIe DT schema.
> 2) Added cpu_addr_fixup() for Cadence Platform driver.
> 3) Fixed subject/description/renamed functions as commented by
> Andrew Murray.
>
> [1] -> http://lore.kernel.org/r/20191209092147.22901-1-kishon@ti.com
> [2] -> http://lore.kernel.org/r/20200106102058.19183-1-kishon@ti.com
> [3] -> http://lore.kernel.org/r/20200305103017.16706-1-kishon@ti.com
> [4] -> http://lore.kernel.org/r/20200417114322.31111-1-kishon@ti.com
> [5] -> http://lore.kernel.org/r/20200417125753.13021-1-kishon@ti.com
> [6] -> http://lore.kernel.org/r/20200506151429.12255-1-kishon@ti.com
> [7] -> http://lore.kernel.org/r/20200522033631.32574-1-kishon@ti.com
> [8] -> http://lore.kernel.org/r/20200708093018.28474-1-kishon@ti.com
> [9] -> http://lore.kernel.org/r/20200713110141.13156-1-kishon@ti.com
> [10] -> http://lore.kernel.org/r/20200521080153.5902-1-kishon@ti.com
>
> Alan Douglas (1):
> PCI: cadence: Add MSI-X support to Endpoint driver
>
> Kishon Vijay Abraham I (14):
> PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits"
> property
> PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
> linux/kernel.h: Add PTR_ALIGN_DOWN macro
> PCI: cadence: Convert all r/w accessors to perform only 32-bit
> accesses
> PCI: cadence: Add support to start link and verify link status
> PCI: cadence: Allow pci_host_bridge to have custom pci_ops
> dt-bindings: PCI: cadence: Remove "mem" from reg binding
> PCI: cadence: Add new *ops* for CPU addr fixup
> PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
> dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
> dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
> PCI: j721e: Add TI J721E PCIe driver
> misc: pci_endpoint_test: Add J721E in pci_device_id table
> MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
>
> .../bindings/pci/cdns,cdns-pcie-host.yaml | 8 +-
> .../bindings/pci/ti,j721e-pci-ep.yaml | 94 ++++
> .../bindings/pci/ti,j721e-pci-host.yaml | 113 ++++
> MAINTAINERS | 4 +-
> drivers/misc/pci_endpoint_test.c | 9 +
> drivers/pci/controller/cadence/Kconfig | 23 +
> drivers/pci/controller/cadence/Makefile | 1 +
> drivers/pci/controller/cadence/pci-j721e.c | 493 ++++++++++++++++++
> .../pci/controller/cadence/pcie-cadence-ep.c | 129 ++++-
> .../controller/cadence/pcie-cadence-host.c | 310 +++++++++--
> .../controller/cadence/pcie-cadence-plat.c | 13 +
> drivers/pci/controller/cadence/pcie-cadence.c | 8 +-
> drivers/pci/controller/cadence/pcie-cadence.h | 161 +++++-
> include/linux/kernel.h | 1 +
> 14 files changed, 1297 insertions(+), 70 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
> create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
> create mode 100644 drivers/pci/controller/cadence/pci-j721e.c
Applied to pci/cadence for v5.9, thanks !
Lorenzo
next prev parent reply other threads:[~2020-07-23 10:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-22 11:03 [PATCH v8 00/15] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 01/15] PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property Kishon Vijay Abraham I
2020-07-22 11:45 ` Lorenzo Pieralisi
2020-07-22 22:30 ` Rob Herring
2020-07-22 11:03 ` [PATCH v8 02/15] PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 03/15] linux/kernel.h: Add PTR_ALIGN_DOWN macro Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 04/15] PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 05/15] PCI: cadence: Add support to start link and verify link status Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 06/15] PCI: cadence: Allow pci_host_bridge to have custom pci_ops Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 07/15] dt-bindings: PCI: cadence: Remove "mem" from reg binding Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 08/15] PCI: cadence: Add new *ops* for CPU addr fixup Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 09/15] PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 10/15] PCI: cadence: Add MSI-X support to Endpoint driver Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 11/15] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 12/15] dt-bindings: PCI: Add EP " Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 13/15] PCI: j721e: Add TI J721E PCIe driver Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 14/15] misc: pci_endpoint_test: Add J721E in pci_device_id table Kishon Vijay Abraham I
2020-07-22 11:03 ` [PATCH v8 15/15] MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe Kishon Vijay Abraham I
2020-07-23 10:02 ` Lorenzo Pieralisi [this message]
2020-07-23 10:12 ` [PATCH v8 00/15] Add PCIe support to TI's J721E SoC Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200723100258.GA7195@e121166-lin.cambridge.arm.com \
--to=lorenzo.pieralisi@arm.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tjoseph@cadence.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).