[PATCH v4 3/6] arm64: dts: sparx5: Add SPI controller and associated mmio-mux

[Lars Povlsen <lars.povlsen@microchip.com>]

This adds a SPI controller to the Microchip Sparx5 SoC, as well as the
mmio-mux that is required to select the right SPI interface for a
given SPI device.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 27 ++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 7e811e24f0e99..2169746703dfb 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -14,6 +14,7 @@ / {
 	#size-cells = <1>;
 
 	aliases {
+		spi0 = &spi0;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -119,8 +120,19 @@ gic: interrupt-controller@600300000 {
 		};
 
 		cpu_ctrl: syscon@600000000 {
-			compatible = "microchip,sparx5-cpu-syscon", "syscon";
+			compatible = "microchip,sparx5-cpu-syscon", "syscon",
+				     "simple-mfd";
 			reg = <0x6 0x00000000 0xd0>;
+			mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <0>;
+				/*
+				 * SI_OWNER and SI2_OWNER in GENERAL_CTRL
+				 * SPI:  value 9 - (SIMC,SIBM) = 0b1001
+				 * SPI2: value 6 - (SIBM,SIMC) = 0b0110
+				 */
+				mux-reg-masks = <0x88 0xf0>;
+			};
 		};
 
 		reset@611010008 {
@@ -155,6 +167,19 @@ uart1: serial@600102000 {
 			status = "disabled";
 		};
 
+		spi0: spi@600104000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-spi";
+			reg = <0x6 0x00104000 0x40>;
+			num-cs = <16>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		timer1: timer@600105000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0x6 0x00105000 0x1000>;
-- 
2.27.0