devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: Darius Berghe <darius.berghe@analog.com>
Cc: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <jic23@kernel.org>,
	<robh@kernel.org>
Subject: Re: [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings
Date: Mon, 27 Jul 2020 18:26:47 +0100	[thread overview]
Message-ID: <20200727182647.00002e3c@huawei.com> (raw)
In-Reply-To: <20200727135834.84093-3-darius.berghe@analog.com>

On Mon, 27 Jul 2020 16:58:33 +0300
Darius Berghe <darius.berghe@analog.com> wrote:

> Add compatible strings for these devices in the existing ltc2471
> driver.
> 
> Signed-off-by: Darius Berghe <darius.berghe@analog.com>

Hi Darius,

A few additional minor comments from me.

> ---
>  drivers/iio/adc/ltc2471.c | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/adc/ltc2471.c b/drivers/iio/adc/ltc2471.c
> index e1c4e966524d..8c57203b1fe4 100644
> --- a/drivers/iio/adc/ltc2471.c
> +++ b/drivers/iio/adc/ltc2471.c
> @@ -1,5 +1,7 @@
>  /*
> - * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors
> + * Driver for Linear Technology LTC2461, LTC2463, LTC2471 and LTC2473 voltage
> + * monitors.
> + * The LTC2463 is identical to the 2461, but reports a differential signal.
>   * The LTC2473 is identical to the 2471, but reports a differential signal.
>   *
>   * Copyright (C) 2017 Topic Embedded Products
> @@ -17,8 +19,10 @@
>  #include <linux/mod_devicetable.h>
>  
>  enum ltc2471_chips {
> +	ltc2461,
> +	ltc2463,
>  	ltc2471,
> -	ltc2473,
> +	ltc2473

Why drop the comma?  We've just added two new devices. Seems possible there
may be more in the future!

>  };
>  
>  struct ltc2471_data {
> @@ -122,7 +126,7 @@ static int ltc2471_i2c_probe(struct i2c_client *client,
>  	indio_dev->name = id->name;
>  	indio_dev->info = &ltc2471_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
> -	if (id->driver_data == ltc2473)
> +	if (id->driver_data == ltc2473 || id->driver_data == ltc2463)
If the only use of driver_data is going to be this check, then just set it
to 2473 for the 2463 and 2473.  It's not uncommon to do this when we have
a bunch of devices that look the same to software.

>  		indio_dev->channels = ltc2473_channel;
>  	else
>  		indio_dev->channels = ltc2471_channel;
> @@ -139,6 +143,8 @@ static int ltc2471_i2c_probe(struct i2c_client *client,
>  }
>  
>  static const struct i2c_device_id ltc2471_i2c_id[] = {
> +	{ "ltc2461", ltc2461 },
> +	{ "ltc2463", ltc2463 },
>  	{ "ltc2471", ltc2471 },
>  	{ "ltc2473", ltc2473 },
>  	{}
> @@ -146,6 +152,8 @@ static const struct i2c_device_id ltc2471_i2c_id[] = {
>  MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id);
>  
>  static const struct of_device_id ltc2471_of_match[] = {
> +	{ .compatible = "adi,ltc2461" },
> +	{ .compatible = "adi,ltc2463" },
>  	{ .compatible = "adi,ltc2471" },
>  	{ .compatible = "adi,ltc2473" },
>  	{}
> @@ -163,6 +171,6 @@ static struct i2c_driver ltc2471_i2c_driver = {
>  
>  module_i2c_driver(ltc2471_i2c_driver);
>  
> -MODULE_DESCRIPTION("LTC2471/LTC2473 ADC driver");
> +MODULE_DESCRIPTION("LTC2461/LTC2463/LTC2471/LTC2473 ADC driver");
>  MODULE_AUTHOR("Topic Embedded Products");
>  MODULE_LICENSE("GPL v2");


  reply	other threads:[~2020-07-27 17:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-27 13:58 iio:adc:ltc2371: add support for ltc2361/ltc2363 Darius Berghe
2020-07-27 13:58 ` [PATCH v3 1/3] ltc2471: add of_match_table for existing devices Darius Berghe
2020-07-27 13:58 ` [PATCH v3 2/3] ltc2471: ltc2461/ltc2463 compatible strings Darius Berghe
2020-07-27 17:26   ` Jonathan Cameron [this message]
2020-07-28  6:24     ` Berghe, Darius
2020-08-01 16:05       ` Jonathan Cameron
2020-07-27 13:58 ` [PATCH v3 3/3] ltc2471 driver yaml Darius Berghe
2020-07-27 17:24   ` Jonathan Cameron
2020-07-27 18:15   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200727182647.00002e3c@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=darius.berghe@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).