From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: <wsa@kernel.org>, <robh+dt@kernel.org>,
<ludovic.desroches@microchip.com>, <nicolas.ferre@microchip.com>,
<alexandre.belloni@bootlin.com>, <linux@armlinux.org.uk>,
<kamel.bouhara@bootlin.com>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: [PATCH 3/4] i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
Date: Tue, 4 Aug 2020 12:59:25 +0300 [thread overview]
Message-ID: <20200804095926.205643-4-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200804095926.205643-1-codrin.ciubotariu@microchip.com>
Even if I2C bus GPIO recovery is optional, devm_gpiod_get() can return
-EPROBE_DEFER, so we should at least treat that. This ends up with
i2c_register_adapter() to be able to return -EPROBE_DEFER.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
Changes from RFC:
- return -EINVAL if i2c_init_recovery() doesn't have the complete
information;
- 'else if' added when checking if i2c_generic_scl_recovery() is used;
- moved i2c_init_recovery() before class-link creation; class-link
cleanup removed;
- moved debug print when the adapter is probed after call to
i2c_init_recovery();
drivers/i2c/i2c-core-base.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index cf0c5eb152e1..99dbaead269e 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -375,15 +375,16 @@ static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
return i2c_gpio_init_generic_recovery(adap);
}
-static void i2c_init_recovery(struct i2c_adapter *adap)
+static int i2c_init_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
char *err_str;
if (!bri)
- return;
+ return 0;
- i2c_gpio_init_recovery(adap);
+ if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
if (!bri->recover_bus) {
err_str = "no recover_bus() found";
@@ -399,10 +400,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
if (gpiod_get_direction(bri->sda_gpiod) == 0)
bri->set_sda = set_sda_gpio_value;
}
- return;
- }
-
- if (bri->recover_bus == i2c_generic_scl_recovery) {
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
/* Generic SCL recovery */
if (!bri->set_scl || !bri->get_scl) {
err_str = "no {get|set}_scl() found";
@@ -414,10 +412,12 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
}
}
- return;
+ return 0;
err:
dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
adap->bus_recovery_info = NULL;
+
+ return -EINVAL;
}
static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
@@ -1444,12 +1444,16 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
if (res)
goto out_reg;
- dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
-
pm_runtime_no_callbacks(&adap->dev);
pm_suspend_ignore_children(&adap->dev, true);
pm_runtime_enable(&adap->dev);
+ res = i2c_init_recovery(adap);
+ if (res == -EPROBE_DEFER)
+ goto out_reg;
+
+ dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
#ifdef CONFIG_I2C_COMPAT
res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
adap->dev.parent);
@@ -1458,8 +1462,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
"Failed to create compatibility class link\n");
#endif
- i2c_init_recovery(adap);
-
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
i2c_acpi_register_devices(adap);
--
2.25.1
next prev parent reply other threads:[~2020-08-04 10:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-04 9:59 [PATCH 0/4] i2c: core: add generic GPIO bus recovery Codrin Ciubotariu
2020-08-04 9:59 ` [PATCH 1/4] dt-binding: i2c: add generic properties for " Codrin Ciubotariu
2020-08-05 8:28 ` wsa
2020-08-04 9:59 ` [PATCH 2/4] i2c: core: add generic I2C GPIO recovery Codrin Ciubotariu
2020-08-05 8:36 ` wsa
2020-08-04 9:59 ` Codrin Ciubotariu [this message]
2020-08-05 8:40 ` [PATCH 3/4] i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs wsa
2020-08-04 9:59 ` [PATCH 4/4] i2c: at91: Move to generic GPIO bus recovery Codrin Ciubotariu
2020-08-05 8:41 ` wsa
2020-08-05 8:52 ` [PATCH 0/4] i2c: core: add " wsa
2020-08-05 10:29 ` Codrin.Ciubotariu
2020-08-05 11:17 ` wsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200804095926.205643-4-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).