[PATCH v6 00/13] irqchip: ti,sci-intr/inta: Update the dt bindings to accept different interrupt parents

[Lokesh Vutla <lokeshvutla@ti.com>]

Hi Marc,
	This is continuation of the RFC patches[0] regarding the driver
updates to support for following interrupt parent connection:
- INTR -> INTR
- INTA -> GICv3
The current existing driver assumes that INTR is always connected to
GICv3 and INTA is always connected to INTR.

As discussed this change breaks the DT backward compatibility but it
allows to not depend on TISCI firmware properties in DT node. IMHO, this
will ensure that any future changes will not effect DT properties.

This series depends on the the new Yaml bindings for common TISCI[1].

[0] https://lore.kernel.org/linux-arm-kernel/20190923042405.26064-1-lokeshvutla@ti.com/
[1] https://patchwork.kernel.org/patch/11676843/

Tested with: (There is a build error on Today's master while building dtbs. So I enabled
	      only the TI specific components for building DTBS).
- DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml"
  v8make dt_binding_check
- DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml"
  v8make dt_binding_check
- DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml"
  v8make dtbs_check
- DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml"
  v8make dtbs_check
- v8make allmodconfig

Changes since v5:
- Rebased on latest master.
- Collected Reviewed-by from Rob.
- Included DT changes in the same series so that everything can be merged in a single go.
  Without DT changes, there are regressions for DMA and other consumer peripherals so suggestion
  is to merge everthing in a single go. DT changes apply cleanly on next and Linus's master
  without any merge conflicts.

Changes since v4:
- Fixed Rob's comment on INTR and INTA yaml documentation
- Collected Reviewed-by's and Acked-by's

Changes since v3:
- Hardcode param_count based on parent instead of reading it from DT.
- Drop storing TISCI device id in platform device id field.

Changes since v2:
- Fixed comments from Rob
- Fixed DT schema warnings.

Changes since v1:
- Rebased on top of latest Linux master
- Dropped DT patches.

Lokesh Vutla (13):
  firmware: ti_sci: Drop the device id to resource type translation
  firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
  firmware: ti_sci: Add support for getting resource with subtype
  dt-bindings: irqchip: ti,sci-intr: Update bindings to drop the usage
    of gic as parent
  dt-bindings: irqchip: Convert ti,sci-intr bindings to yaml
  irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
  dt-bindings: irqchip: ti,sci-inta: Update docs to support different
    parent.
  dt-bindings: irqchip: Convert ti,sci-inta bindings to yaml
  irqchip/ti-sci-inta: Do not store TISCI device id in platform device
    id field
  irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
  arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
  arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
  arm64: dts: k3-am65: Update the RM resource types

 .../interrupt-controller/ti,sci-inta.txt      |  66 --------
 .../interrupt-controller/ti,sci-inta.yaml     |  98 +++++++++++
 .../interrupt-controller/ti,sci-intr.txt      |  82 ---------
 .../interrupt-controller/ti,sci-intr.yaml     | 102 ++++++++++++
 MAINTAINERS                                   |   4 +-
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |  36 ++--
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  12 +-
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |   8 +-
 .../arm64/boot/dts/ti/k3-am654-base-board.dts |   4 +-
 .../dts/ti/k3-j721e-common-proc-board.dts     |  10 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  43 ++---
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  12 +-
 drivers/firmware/ti_sci.c                     | 155 ++++++++----------
 drivers/irqchip/irq-ti-sci-inta.c             |  95 +++++++++--
 drivers/irqchip/irq-ti-sci-intr.c             | 152 ++++++++++-------
 include/linux/soc/ti/ti_sci_protocol.h        |  13 ++
 16 files changed, 516 insertions(+), 376 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
 delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml

-- 
2.27.0