From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7C9D6C4361B for ; Thu, 6 Aug 2020 11:05:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 62E18221E2 for ; Thu, 6 Aug 2020 11:05:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="upLcmO6b" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728848AbgHFHtY (ORCPT ); Thu, 6 Aug 2020 03:49:24 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:50380 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728788AbgHFHtR (ORCPT ); Thu, 6 Aug 2020 03:49:17 -0400 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 0767mspG108586; Thu, 6 Aug 2020 02:48:54 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1596700134; bh=mQz77AWFdi3UjjdsG0v0lCQYWub3Idv8f0kCXeTCPRY=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=upLcmO6b7ZD1XphOY2IwbRdL0avHcY0fbBbtijrfSsypjWM57ZIfYH9oXEC0B+1wa 3YXwBTHFwl3uKEgzQcwcrM0JrEscxdRxdAwN2km6zk/2Gc6jXv9BM0Ms3ROU34+n++ nwtV3rTkk+RZaGdeBPS/+eN6i4WnipzlLhpgM7TU= Received: from DLEE103.ent.ti.com (dlee103.ent.ti.com [157.170.170.33]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 0767mskP017928 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 6 Aug 2020 02:48:54 -0500 Received: from DLEE105.ent.ti.com (157.170.170.35) by DLEE103.ent.ti.com (157.170.170.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Thu, 6 Aug 2020 02:48:53 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Thu, 6 Aug 2020 02:48:53 -0500 Received: from lokesh-ssd.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 0767mSYs051454; Thu, 6 Aug 2020 02:48:49 -0500 From: Lokesh Vutla To: Marc Zyngier , Rob Herring CC: Thomas Gleixner , Nishanth Menon , Tero Kristo , Santosh Shilimkar , Linux ARM Mailing List , Sekhar Nori , Grygorii Strashko , Peter Ujfalusi , Device Tree Mailing List , Suman Anna , Lokesh Vutla , Rob Herring Subject: [PATCH v6 05/13] dt-bindings: irqchip: Convert ti,sci-intr bindings to yaml Date: Thu, 6 Aug 2020 13:18:18 +0530 Message-ID: <20200806074826.24607-6-lokeshvutla@ti.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200806074826.24607-1-lokeshvutla@ti.com> References: <20200806074826.24607-1-lokeshvutla@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org In order to automate the verification of DT nodes convert ti,sci-intr.txt ti,sci-intr.yaml. Reviewed-by: Rob Herring Signed-off-by: Lokesh Vutla --- .../interrupt-controller/ti,sci-intr.txt | 83 -------------- .../interrupt-controller/ti,sci-intr.yaml | 102 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 103 insertions(+), 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt deleted file mode 100644 index c7046f3da201..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ /dev/null @@ -1,83 +0,0 @@ -Texas Instruments K3 Interrupt Router -===================================== - -The Interrupt Router (INTR) module provides a mechanism to mux M -interrupt inputs to N interrupt outputs, where all M inputs are selectable -to be driven per N output. An Interrupt Router can either handle edge triggered -or level triggered interrupts and that is fixed in hardware. - - Interrupt Router - +----------------------+ - | Inputs Outputs | - +-------+ | +------+ +-----+ | - | GPIO |----------->| | irq0 | | 0 | | Host IRQ - +-------+ | +------+ +-----+ | controller - | . . | +-------+ - +-------+ | . . |----->| IRQ | - | INTA |----------->| . . | +-------+ - +-------+ | . +-----+ | - | +------+ | N | | - | | irqM | +-----+ | - | +------+ | - | | - +----------------------+ - -There is one register per output (MUXCNTL_N) that controls the selection. -Configuration of these MUXCNTL_N registers is done by a system controller -(like the Device Memory and Security Controller on K3 AM654 SoC). System -controller will keep track of the used and unused registers within the Router. -Driver should request the system controller to get the range of GIC IRQs -assigned to the requesting hosts. It is the drivers responsibility to keep -track of Host IRQs. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Router Node: ----------------------------- -Required Properties: -- compatible: Must be "ti,sci-intr". -- ti,intr-trigger-type: Should be one of the following: - 1: If intr supports edge triggered interrupts. - 4: If intr supports level triggered interrupts. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value should be 1. - First cell should contain interrupt router input number - as specified by hardware. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dev-id: TISCI device id of interrupt controller. -- ti,interrupt-ranges: Set of triplets containing ranges that convert - the INTR output interrupt numbers to parent's - interrupt number. Each triplet has following entries: - - First entry specifies the base for intr output irq - - Second entry specifies the base for parent irqs - - Third entry specifies the limit - -For more details on TISCI IRQ resource management refer: -https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html - -Example: --------- -The following example demonstrates both interrupt router node and the consumer -node(main gpio) on the AM654 SoC: - -main_gpio_intr: interrupt-controller0 { - compatible = "ti,sci-intr"; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <1>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <131>; - ti,interrupt-ranges = <0 360 32>; -}; - -main_gpio0: gpio@600000 { - ... - interrupt-parent = <&main_gpio_intr>; - interrupts = <192>, <193>, <194>, <195>, <196>, <197>; - ... -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000000..cff6a956afb4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 0fdb9a7c5ffd..58d4740b0a9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16992,7 +16992,7 @@ S: Maintained F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt -F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt F: drivers/clk/keystone/sci-clk.c -- 2.27.0