Re: [PATCH 2/3] dt-bindings: usb: cdns,usb3: Add cdns,phyrst-a-enable property

[Peter Chen <peter.chen@nxp.com>]

On 20-08-25 15:00:58, Roger Quadros wrote:
> Controller version 0x0002450D has USB2 PHY RX sensitivity issues
> that needs to be worked around by enabling phyrst-a-enable bit
> in PHYRST_CFG register.
> 
> There is no way to distinguish between the controller version
> before the device controller is started so we need to add this
> DT property.

Maybe you should say "There is no way to know controller version
at host mode, but this workaround needs for both host and device
mode, so we have to add this DT property", the same for the comments
of your driver code patch.

Peter
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> index 7bc0263accee..e670adc955e1 100644
> --- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> +++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
> @@ -58,6 +58,10 @@ properties:
>        buffers expressed in KB
>      $ref: /schemas/types.yaml#/definitions/uint32
>  
> +  cdns,phyrst-a-enable:
> +    description: Enable resetting of PHY if Rx fail is detected
> +    type: boolean
> +
>  required:
>    - compatible
>    - reg
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 

-- 

Thanks,
Peter Chen