From: Krzysztof Kozlowski <krzk@kernel.org>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
Han Xu <han.xu@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v2 11/19] arm64: dts: imx8mn-ddr4-evk: Align regulator names with schema
Date: Fri, 28 Aug 2020 18:47:42 +0200 [thread overview]
Message-ID: <20200828164750.10377-12-krzk@kernel.org> (raw)
In-Reply-To: <20200828164750.10377-1-krzk@kernel.org>
Device tree schema expects regulator names to be lowercase. Changing to
lowercase has multiple effects:
1. LDO6 supply is now properly configured, because regulator driver
looks for supplies by lowercase name,
2. User-visible names via sysfs or debugfs are now lowercase,
2. dtbs_check warnings are fixed:
pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../boot/dts/freescale/imx8mn-ddr4-evk.dts | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 3ac8f9d3c372..8f7155716c84 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -60,7 +60,7 @@
regulators {
buck1_reg: BUCK1 {
- regulator-name = "BUCK1";
+ regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -69,7 +69,7 @@
};
buck2_reg: BUCK2 {
- regulator-name = "BUCK2";
+ regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
@@ -79,14 +79,14 @@
buck3_reg: BUCK3 {
// BUCK5 in datasheet
- regulator-name = "BUCK3";
+ regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
};
buck4_reg: BUCK4 {
// BUCK6 in datasheet
- regulator-name = "BUCK4";
+ regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -95,7 +95,7 @@
buck5_reg: BUCK5 {
// BUCK7 in datasheet
- regulator-name = "BUCK5";
+ regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
@@ -104,7 +104,7 @@
buck6_reg: BUCK6 {
// BUCK8 in datasheet
- regulator-name = "BUCK6";
+ regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -112,7 +112,7 @@
};
ldo1_reg: LDO1 {
- regulator-name = "LDO1";
+ regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -120,7 +120,7 @@
};
ldo2_reg: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -128,7 +128,7 @@
};
ldo3_reg: LDO3 {
- regulator-name = "LDO3";
+ regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -136,7 +136,7 @@
};
ldo4_reg: LDO4 {
- regulator-name = "LDO4";
+ regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -144,7 +144,7 @@
};
ldo6_reg: LDO6 {
- regulator-name = "LDO6";
+ regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
--
2.17.1
next prev parent reply other threads:[~2020-08-28 16:50 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 16:47 [PATCH v2 00/19] arm64: dts: imx8: Align pins and regulators with dtschema Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 01/19] dt-bindings: mfd: rohm,bd71847-pmic: Correct clock properties requirements Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 02/19] dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 03/19] arm64: dts: imx8mm-beacon-kit: Add missing build through Makefile Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 04/19] arm64: dts: imx8mm-beacon-som: Align regulator names with schema Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 05/19] arm64: dts: imx8mm-beacon-som: Fix atmel,24c64 EEPROM compatible Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 06/19] arm64: dts: imx8mm-beacon: Align pin configuration group names with schema Krzysztof Kozlowski
2020-09-05 6:11 ` Shawn Guo
2020-08-28 16:47 ` [PATCH v2 07/19] arm64: dts: imx8mm-evk: Align regulator " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 08/19] arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC Krzysztof Kozlowski
2020-08-31 5:30 ` Vaittinen, Matti
2020-09-05 6:11 ` Shawn Guo
2020-08-28 16:47 ` [PATCH v2 09/19] arm64: dts: imx8mm-evk: Align pin configuration group names with schema Krzysztof Kozlowski
2020-09-05 6:13 ` Shawn Guo
2020-08-28 16:47 ` [PATCH v2 10/19] arm64: dts: imx8mm-ddr4-evk: " Krzysztof Kozlowski
2020-08-28 16:47 ` Krzysztof Kozlowski [this message]
2020-08-31 5:27 ` [PATCH v2 11/19] arm64: dts: imx8mn-ddr4-evk: Align regulator " Vaittinen, Matti
2020-08-28 16:47 ` [PATCH v2 12/19] arm64: dts: imx8mn-evk: Align pin configuration group " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 13/19] arm64: dts: imx8mq-evk: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 14/19] arm64: dts: imx8mq-librem5-devkit: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 15/19] arm64: dts: imx8mq-phanbell: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 16/19] arm64: dts: imx8mq-pico-pi: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 17/19] arm64: dts: imx8mq-sr-som: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 18/19] arm64: dts: imx8mq-hummingboard-pulse: " Krzysztof Kozlowski
2020-08-28 16:47 ` [PATCH v2 19/19] arm64: dts: imx8qxp-colibri: " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200828164750.10377-12-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=han.xu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).