From: Santiago Hormazabal <santiagohssl@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Ezequiel Garcia <ezequiel@collabora.com>,
Hans Verkuil <hverkuil@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-kernel@vger.kernel.org
Cc: Santiago Hormazabal <santiagohssl@gmail.com>
Subject: [PATCH 3/3] media: kt0913: device tree binding
Date: Mon, 31 Aug 2020 19:06:01 -0300 [thread overview]
Message-ID: <20200831220601.20794-4-santiagohssl@gmail.com> (raw)
In-Reply-To: <20200831220601.20794-1-santiagohssl@gmail.com>
Document bindings for the kt0913 AM/FM radio tuner.
Signed-off-by: Santiago Hormazabal <santiagohssl@gmail.com>
---
.../bindings/media/i2c/ktm,kt0913.yaml | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml b/Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml
new file mode 100644
index 000000000000..2c3d1795da43
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ktm,kt0913.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Santiago Hormazabal <santiagohssl@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ktm,kt0913.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for the KTMicro KT0913 FM/AM radio tuner.
+
+maintainers:
+ - Santiago Hormazabal <santiagohssl@gmail.com>
+
+description: |-
+ The KT0913 is a low cost, low components FM/AM radio chip.
+ It uses the I2C protocol for operation.
+
+properties:
+ compatible:
+ const: ktm,kt0913
+
+ reg:
+ description: I2C device address
+ const: 0x35
+
+ ktm,anti-pop:
+ description: |
+ Selects the DAC Anti-Pop capacitor. Possible values are
+ 0 thru 3, which corresponds to 100uF (default), 60uF, 20uF or 10uF.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1, 2, 3]
+
+ ktm,refclk:
+ description: |
+ Selects the reference clock used on the KT0913. Possible
+ values are 0 thru 9, which corresponds to 32.768kHz (default),
+ 6.5MHz, 7.6MHz, 12MHz, 13MHz, 15.2MHz, 19.2MHz, 24MHz, 26MHz, 38kHz.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ kt0913: fm-am-tuner@35 {
+ compatible = "ktm,kt0913";
+ reg = <0x35>;
+ ktm,anti-pop = <0x01>;
+ ktm,refclk = <0x00>;
+ };
+ };
+...
--
2.24.1
next prev parent reply other threads:[~2020-08-31 22:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 22:05 [PATCH 0/3] KT0913 FM/AM driver Santiago Hormazabal
2020-08-31 22:05 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add KT Micro Santiago Hormazabal
2020-09-14 18:27 ` Rob Herring
2020-08-31 22:06 ` [PATCH 2/3] media: Add support for the AM/FM radio chip KT0913 from " Santiago Hormazabal
2020-09-03 16:45 ` Joe Perches
2020-09-03 19:51 ` Santiago Hormazabal
2020-09-09 14:06 ` Hans Verkuil
2020-08-31 22:06 ` Santiago Hormazabal [this message]
2020-09-03 16:11 ` [PATCH 3/3] media: kt0913: device tree binding Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831220601.20794-4-santiagohssl@gmail.com \
--to=santiagohssl@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).