devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list),
	bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM
	SYSTEMPORT ETHERNET DRIVER)
Subject: [PATCH net-next 2/3] net: systemport: fetch and use clock resources
Date: Tue,  1 Sep 2020 14:43:47 -0700	[thread overview]
Message-ID: <20200901214348.1523403-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20200901214348.1523403-1-f.fainelli@gmail.com>

We disable clocks shortly after probing the device to save as much power as
possible in case the interface is never used. When bcm_sysport_open() is
invoked, clocks are enabled, and disabled in bcm_sysport_stop().

A similar scheme is applied to the suspend/resume functions.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 30 +++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index dfed9ade6950..91eadba5540c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -20,6 +20,7 @@
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
 #include <net/dsa.h>
+#include <linux/clk.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
 
@@ -186,6 +187,11 @@ static int bcm_sysport_set_features(struct net_device *dev,
 				    netdev_features_t features)
 {
 	struct bcm_sysport_priv *priv = netdev_priv(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	/* Read CRC forward */
 	if (!priv->is_lite)
@@ -197,6 +203,8 @@ static int bcm_sysport_set_features(struct net_device *dev,
 	bcm_sysport_set_rx_csum(dev, features);
 	bcm_sysport_set_tx_csum(dev, features);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 }
 
@@ -1940,6 +1948,8 @@ static int bcm_sysport_open(struct net_device *dev)
 	unsigned int i;
 	int ret;
 
+	clk_prepare_enable(priv->clk);
+
 	/* Reset UniMAC */
 	umac_reset(priv);
 
@@ -1970,7 +1980,8 @@ static int bcm_sysport_open(struct net_device *dev)
 				0, priv->phy_interface);
 	if (!phydev) {
 		netdev_err(dev, "could not attach to PHY\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_clk_disable;
 	}
 
 	/* Reset house keeping link status */
@@ -2048,6 +2059,8 @@ static int bcm_sysport_open(struct net_device *dev)
 	free_irq(priv->irq0, dev);
 out_phy_disconnect:
 	phy_disconnect(phydev);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -2106,6 +2119,8 @@ static int bcm_sysport_stop(struct net_device *dev)
 	/* Disconnect from PHY */
 	phy_disconnect(dev->phydev);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 }
 
@@ -2487,6 +2502,10 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 	/* Initialize private members */
 	priv = netdev_priv(dev);
 
+	priv->clk = devm_clk_get_optional(&pdev->dev, "sw_sysport");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
 	/* Allocate number of TX rings */
 	priv->tx_rings = devm_kcalloc(&pdev->dev, txq,
 				      sizeof(struct bcm_sysport_tx_ring),
@@ -2588,6 +2607,8 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		goto err_deregister_notifier;
 	}
 
+	clk_prepare_enable(priv->clk);
+
 	priv->rev = topctrl_readl(priv, REV_CNTL) & REV_MASK;
 	dev_info(&pdev->dev,
 		 "Broadcom SYSTEMPORT%s " REV_FMT
@@ -2596,6 +2617,8 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		 (priv->rev >> 8) & 0xff, priv->rev & 0xff,
 		 priv->irq0, priv->irq1, txq, rxq);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 
 err_deregister_notifier:
@@ -2752,6 +2775,8 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d)
 	if (device_may_wakeup(d) && priv->wolopts)
 		ret = bcm_sysport_suspend_to_wol(priv);
 
+	clk_disable_unprepare(priv->clk);
+
 	return ret;
 }
 
@@ -2765,6 +2790,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 	if (!netif_running(dev))
 		return 0;
 
+	clk_prepare_enable(priv->clk);
+
 	umac_reset(priv);
 
 	/* Disable the UniMAC RX/TX */
@@ -2844,6 +2871,7 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 out_free_tx_rings:
 	for (i = 0; i < dev->num_tx_queues; i++)
 		bcm_sysport_fini_tx_ring(priv, i);
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 6d80735fbc7f..51800053e88c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -770,6 +770,7 @@ struct bcm_sysport_priv {
 	u32			wolopts;
 	u8			sopass[SOPASS_MAX];
 	unsigned int		wol_irq_disabled:1;
+	struct clk		*clk;
 
 	/* MIB related fields */
 	struct bcm_sysport_mib	mib;
-- 
2.25.1


  parent reply	other threads:[~2020-09-01 21:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 21:43 [PATCH net-next 0/3] net: systemport: Clock support Florian Fainelli
2020-09-01 21:43 ` [PATCH net-next 1/3] dt-bindings: net: Document Broadcom SYSTEMPORT clocks Florian Fainelli
2020-09-01 21:43 ` Florian Fainelli [this message]
2020-09-01 21:43 ` [PATCH net-next 3/3] net: systemport: Manage Wake-on-LAN clock Florian Fainelli
2020-09-03 22:06 ` [PATCH net-next 0/3] net: systemport: Clock support David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200901214348.1523403-3-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).