[PATCH net-next 0/3] net: systemport: Clock support

[PATCH net-next 0/3] net: systemport: Clock support

[Florian Fainelli]

Hi David,

This patch series makes the SYSTEMPORT driver request and manage its
main and Wake-on-LAN clocks appropriately.

Florian Fainelli (3):
  dt-bindings: net: Document Broadcom SYSTEMPORT clocks
  net: systemport: fetch and use clock resources
  net: systemport: Manage Wake-on-LAN clock

 .../bindings/net/brcm,systemport.txt          |  5 +++
 drivers/net/ethernet/broadcom/bcmsysport.c    | 40 ++++++++++++++++++-
 drivers/net/ethernet/broadcom/bcmsysport.h    |  2 +
 3 files changed, 45 insertions(+), 2 deletions(-)

-- 
2.25.1

[PATCH net-next 1/3] dt-bindings: net: Document Broadcom SYSTEMPORT clocks

[Florian Fainelli]

The Broadcom SYSTEMPORT adapters require the use of two clocks for
normal operations and during Wake-on-LAN, document those in the binding
document.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/net/brcm,systemport.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
index 83f29e0e11ba..745bb1776572 100644
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.txt
@@ -20,6 +20,11 @@ Optional properties:
 - systemport,num-tier1-arb: number of tier 1 arbiters, an integer
 - systemport,num-txq: number of HW transmit queues, an integer
 - systemport,num-rxq: number of HW receive queues, an integer
+- clocks: When provided, must be two phandles to the functional clocks nodes of
+  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
+  during normal operation, while the second phandle is the Wake-on-LAN clock.
+- clock-names: When provided, names of the functional clock phandles, first
+  name should be "sw_sysport" and second should be "sw_sysportwol".
 
 Example:
 ethernet@f04a0000 {
-- 
2.25.1

[PATCH net-next 2/3] net: systemport: fetch and use clock resources

[Florian Fainelli]

We disable clocks shortly after probing the device to save as much power as
possible in case the interface is never used. When bcm_sysport_open() is
invoked, clocks are enabled, and disabled in bcm_sysport_stop().

A similar scheme is applied to the suspend/resume functions.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 30 +++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index dfed9ade6950..91eadba5540c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -20,6 +20,7 @@
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
 #include <net/dsa.h>
+#include <linux/clk.h>
 #include <net/ip.h>
 #include <net/ipv6.h>
 
@@ -186,6 +187,11 @@ static int bcm_sysport_set_features(struct net_device *dev,
 				    netdev_features_t features)
 {
 	struct bcm_sysport_priv *priv = netdev_priv(dev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	/* Read CRC forward */
 	if (!priv->is_lite)
@@ -197,6 +203,8 @@ static int bcm_sysport_set_features(struct net_device *dev,
 	bcm_sysport_set_rx_csum(dev, features);
 	bcm_sysport_set_tx_csum(dev, features);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 }
 
@@ -1940,6 +1948,8 @@ static int bcm_sysport_open(struct net_device *dev)
 	unsigned int i;
 	int ret;
 
+	clk_prepare_enable(priv->clk);
+
 	/* Reset UniMAC */
 	umac_reset(priv);
 
@@ -1970,7 +1980,8 @@ static int bcm_sysport_open(struct net_device *dev)
 				0, priv->phy_interface);
 	if (!phydev) {
 		netdev_err(dev, "could not attach to PHY\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_clk_disable;
 	}
 
 	/* Reset house keeping link status */
@@ -2048,6 +2059,8 @@ static int bcm_sysport_open(struct net_device *dev)
 	free_irq(priv->irq0, dev);
 out_phy_disconnect:
 	phy_disconnect(phydev);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -2106,6 +2119,8 @@ static int bcm_sysport_stop(struct net_device *dev)
 	/* Disconnect from PHY */
 	phy_disconnect(dev->phydev);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 }
 
@@ -2487,6 +2502,10 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 	/* Initialize private members */
 	priv = netdev_priv(dev);
 
+	priv->clk = devm_clk_get_optional(&pdev->dev, "sw_sysport");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
 	/* Allocate number of TX rings */
 	priv->tx_rings = devm_kcalloc(&pdev->dev, txq,
 				      sizeof(struct bcm_sysport_tx_ring),
@@ -2588,6 +2607,8 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		goto err_deregister_notifier;
 	}
 
+	clk_prepare_enable(priv->clk);
+
 	priv->rev = topctrl_readl(priv, REV_CNTL) & REV_MASK;
 	dev_info(&pdev->dev,
 		 "Broadcom SYSTEMPORT%s " REV_FMT
@@ -2596,6 +2617,8 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		 (priv->rev >> 8) & 0xff, priv->rev & 0xff,
 		 priv->irq0, priv->irq1, txq, rxq);
 
+	clk_disable_unprepare(priv->clk);
+
 	return 0;
 
 err_deregister_notifier:
@@ -2752,6 +2775,8 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d)
 	if (device_may_wakeup(d) && priv->wolopts)
 		ret = bcm_sysport_suspend_to_wol(priv);
 
+	clk_disable_unprepare(priv->clk);
+
 	return ret;
 }
 
@@ -2765,6 +2790,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 	if (!netif_running(dev))
 		return 0;
 
+	clk_prepare_enable(priv->clk);
+
 	umac_reset(priv);
 
 	/* Disable the UniMAC RX/TX */
@@ -2844,6 +2871,7 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 out_free_tx_rings:
 	for (i = 0; i < dev->num_tx_queues; i++)
 		bcm_sysport_fini_tx_ring(priv, i);
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 6d80735fbc7f..51800053e88c 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -770,6 +770,7 @@ struct bcm_sysport_priv {
 	u32			wolopts;
 	u8			sopass[SOPASS_MAX];
 	unsigned int		wol_irq_disabled:1;
+	struct clk		*clk;
 
 	/* MIB related fields */
 	struct bcm_sysport_mib	mib;
-- 
2.25.1

[PATCH net-next 3/3] net: systemport: Manage Wake-on-LAN clock

[Florian Fainelli]

It is necessary to manage the Wake-on-LAN clock to turn on the
appropriate blocks for MPD or CFP-based packet matching to work
otherwise we will not be able to reliably match packets during suspend.

Reported-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 10 +++++++++-
 drivers/net/ethernet/broadcom/bcmsysport.h |  1 +
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 91eadba5540c..b25c70b74c92 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2583,6 +2583,10 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 	if (!ret)
 		device_set_wakeup_capable(&pdev->dev, 1);
 
+	priv->wol_clk = devm_clk_get_optional(&pdev->dev, "sw_sysportwol");
+	if (IS_ERR(priv->wol_clk))
+		return PTR_ERR(priv->wol_clk);
+
 	/* Set the needed headroom once and for all */
 	BUILD_BUG_ON(sizeof(struct bcm_tsb) != 8);
 	dev->needed_headroom += sizeof(struct bcm_tsb);
@@ -2772,8 +2776,10 @@ static int __maybe_unused bcm_sysport_suspend(struct device *d)
 	bcm_sysport_fini_rx_ring(priv);
 
 	/* Get prepared for Wake-on-LAN */
-	if (device_may_wakeup(d) && priv->wolopts)
+	if (device_may_wakeup(d) && priv->wolopts) {
+		clk_prepare_enable(priv->wol_clk);
 		ret = bcm_sysport_suspend_to_wol(priv);
+	}
 
 	clk_disable_unprepare(priv->clk);
 
@@ -2791,6 +2797,8 @@ static int __maybe_unused bcm_sysport_resume(struct device *d)
 		return 0;
 
 	clk_prepare_enable(priv->clk);
+	if (priv->wolopts)
+		clk_disable_unprepare(priv->wol_clk);
 
 	umac_reset(priv);
 
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 51800053e88c..3a5cb6f128f5 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -771,6 +771,7 @@ struct bcm_sysport_priv {
 	u8			sopass[SOPASS_MAX];
 	unsigned int		wol_irq_disabled:1;
 	struct clk		*clk;
+	struct clk		*wol_clk;
 
 	/* MIB related fields */
 	struct bcm_sysport_mib	mib;
-- 
2.25.1

Re: [PATCH net-next 0/3] net: systemport: Clock support

[David Miller]

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue,  1 Sep 2020 14:43:45 -0700

> This patch series makes the SYSTEMPORT driver request and manage its
> main and Wake-on-LAN clocks appropriately.

Series applied, thanks.