[PATCH 05/20] dt-bindings:iio:adc:marvell,berlin2-adc yaml conversion

[Jonathan Cameron <jic23@kernel.org>]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Part of a general move of IIO bindings over to yaml.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 .../bindings/iio/adc/berlin2_adc.txt          | 19 -------
 .../bindings/iio/adc/marvell,berlin2-adc.yaml | 50 +++++++++++++++++++
 2 files changed, 50 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
deleted file mode 100644
index 908334c6b07f..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Berlin Analog to Digital Converter (ADC)
-
-The Berlin ADC has 8 channels, with one connected to a temperature sensor.
-It is part of the system controller register set. The ADC node should be a
-sub-node of the system controller node.
-
-Required properties:
-- compatible: must be "marvell,berlin2-adc"
-- interrupts: the interrupts for the ADC and the temperature sensor
-- interrupt-names: should be "adc" and "tsen"
-
-Example:
-
-adc: adc {
-	compatible = "marvell,berlin2-adc";
-	interrupt-parent = <&sic>;
-	interrupts = <12>, <14>;
-	interrupt-names = "adc", "tsen";
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
new file mode 100644
index 000000000000..496cddbe96ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/marvell,belin2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Berlin 2 Analog to Digital Convertor (ADC)
+
+maintainers:
+  - Antoine Tenart <antoine.tenart@free-electrons.com>
+
+description:
+  The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+  It is part of the system controller register set. The ADC node should be a
+  sub-node of the system controller node.
+
+properties:
+  compatible:
+    const: marvell,berlin2-adc
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: adc
+      - const: tsen
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl {
+        adc {
+            compatible = "marvell,berlin2-adc";
+            interrupt-parent = <&sic>;
+            interrupts = <12>, <14>;
+            interrupt-names = "adc", "tsen";
+        };
+    };
+...
-- 
2.28.0