From: Sam Ravnborg <sam@ravnborg.org>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: devicetree@vger.kernel.org, thierry.reding@gmail.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v2 2/3] dt-bindings: display: panel: add TDO tl070wsh30 DSI panel bindings
Date: Mon, 7 Sep 2020 21:24:18 +0200 [thread overview]
Message-ID: <20200907192418.GA558348@ravnborg.org> (raw)
In-Reply-To: <358ee0c3-fe1c-b9b6-9ed8-086f9d14afd9@baylibre.com>
Hi Neil.
On Mon, Sep 07, 2020 at 03:24:47PM +0200, Neil Armstrong wrote:
> Hi,
>
> On 07/09/2020 13:45, Sam Ravnborg wrote:
> > Hi Neil.
> >
> > On Mon, Sep 07, 2020 at 01:10:26PM +0200, Neil Armstrong wrote:
> >> This add the bindings for the 1024*600 tl070wsh30 DSI panel.
> >
> > The binding looks like a panel-simple-dsi.yaml candidate.
> > Only differen is enable-gpios versus reset-gpios
>
> This is the only difference, the panel only has a reset signal and no
> enable signal.
>
> But I can add a reset-gpios to panel-simple-dsi.yaml, would it be ok ?
Yes, that would be fine as long as it is not a required property.
It was a mistake we did not add it from the beginning.
There has been patches floating to add reset-gpios to panle.simple.c
that I rejected - this was also wrong.
Really simple and dumb panels has no reset but dsi panels that
panel-simple supports too has a reset.
Sam
>
> Neil
>
> >
> > Could you check if we can use panel-simple-dsi-yaml.
> >
> > Sam
> >
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> >> ---
> >> .../display/panel/tdo,tl070wsh30.yaml | 58 +++++++++++++++++++
> >> 1 file changed, 58 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml
> >> new file mode 100644
> >> index 000000000000..20f4fdedfcb0
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml
> >> @@ -0,0 +1,58 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> >> +# Copyright 2020 BayLibre, SAS
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/display/panel/tdo,tl070wsh30.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: TDO TL070WSH30 DSI panel
> >> +
> >> +maintainers:
> >> + - Neil Armstrong <narmstrong@baylibre.com>
> >> +
> >> +allOf:
> >> + - $ref: panel-common.yaml#
> >> +
> >> +properties:
> >> +
> >> + compatible:
> >> + enum:
> >> + - tdo,tl070wsh30
> >> +
> >> + reg:
> >> + maxItems: 1
> >> + description: DSI virtual channel
> >> +
> >> + backlight: true
> >> + reset-gpios: true
> >> + port: true
> >> + power-supply: true
> >> +
> >> +additionalProperties: false
> >> +
> >> +required:
> >> + - compatible
> >> + - power-supply
> >> + - reset-gpios
> >> + - port
> >> + - reg
> >> +
> >> +examples:
> >> + - |
> >> + dsi {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + panel@0 {
> >> + compatible = "tdo,tl070wsh30";
> >> + reg = <0>;
> >> + power-supply = <&vcc_lcd_reg>;
> >> + backlight = <&panel_backlight>;
> >> + reset-gpios = <&gpio_reset>;
> >> +
> >> + port {
> >> + panel: endpoint {
> >> + remote-endpoint = <&mipi_dsi_out>;
> >> + };
> >> + };
> >> + };
> >> + };
> >> --
> >> 2.22.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
prev parent reply other threads:[~2020-09-07 19:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200907111027.21933-1-narmstrong@baylibre.com>
2020-09-07 11:10 ` [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add Shanghai Top Display Optolelectronics vendor prefix Neil Armstrong
2020-09-07 11:10 ` [PATCH v2 2/3] dt-bindings: display: panel: add TDO tl070wsh30 DSI panel bindings Neil Armstrong
2020-09-07 11:45 ` Sam Ravnborg
2020-09-07 13:24 ` Neil Armstrong
2020-09-07 19:24 ` Sam Ravnborg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907192418.GA558348@ravnborg.org \
--to=sam@ravnborg.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).