Re: [PATCH 5/7] cpufreq: qcom-hw: Use regmap for accessing hardware registers

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On 0908, Viresh Kumar wrote:
> On 08-09-20, 13:27, Manivannan Sadhasivam wrote:
> > Use regmap for accessing cpufreq registers in hardware.
> 
> Why ? Please mention why a change is required in the log.
> 

Only because it is recommended to use regmap for abstracting the hw access.
Moreover it handles the proper locking for us in the core (spinlock vs mutex).
I've seen many subsystem maintainers prefer regmap over plain readl/writel
calls. I'll add the reason in commit log.

Thanks,
Mani

> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/cpufreq/qcom-cpufreq-hw.c | 55 ++++++++++++++++++++++++++-----
> >  1 file changed, 47 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> > index 41853db7c9b8..de816bcafd33 100644
> > --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> > +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> > @@ -12,6 +12,7 @@
> >  #include <linux/of_address.h>
> >  #include <linux/of_platform.h>
> >  #include <linux/pm_opp.h>
> > +#include <linux/regmap.h>
> >  #include <linux/slab.h>
> >  
> >  #define LUT_MAX_ENTRIES			40U
> > @@ -32,6 +33,7 @@ struct qcom_cpufreq_soc_data {
> >  
> >  struct qcom_cpufreq_data {
> >  	void __iomem *base;
> > +	struct regmap *regmap;
> >  	const struct qcom_cpufreq_soc_data *soc_data;
> >  };
> >  
> > @@ -85,8 +87,11 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
> >  	struct qcom_cpufreq_data *data = policy->driver_data;
> >  	const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
> >  	unsigned long freq = policy->freq_table[index].frequency;
> > +	int ret;
> >  
> > -	writel_relaxed(index, data->base + soc_data->reg_perf_state);
> > +	ret = regmap_write(data->regmap, soc_data->reg_perf_state, index);
> > +	if (ret)
> > +		return ret;
> >  
> >  	if (icc_scaling_enabled)
> >  		qcom_cpufreq_set_bw(policy, freq);
> > @@ -102,6 +107,7 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
> >  	const struct qcom_cpufreq_soc_data *soc_data;
> >  	struct cpufreq_policy *policy;
> >  	unsigned int index;
> > +	int ret;
> >  
> >  	policy = cpufreq_cpu_get_raw(cpu);
> >  	if (!policy)
> > @@ -110,7 +116,10 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
> >  	data = policy->driver_data;
> >  	soc_data = data->soc_data;
> >  
> > -	index = readl_relaxed(data->base + soc_data->reg_perf_state);
> > +	ret = regmap_read(data->regmap, soc_data->reg_perf_state, &index);
> > +	if (ret)
> > +		return 0;
> > +
> >  	index = min(index, LUT_MAX_ENTRIES - 1);
> >  
> >  	return policy->freq_table[index].frequency;
> > @@ -123,9 +132,12 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
> >  	const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
> >  	unsigned int index;
> >  	unsigned long freq;
> > +	int ret;
> >  
> >  	index = policy->cached_resolved_idx;
> > -	writel_relaxed(index, data->base + soc_data->reg_perf_state);
> > +	ret = regmap_write(data->regmap, soc_data->reg_perf_state, index);
> > +	if (ret)
> > +		return 0;
> >  
> >  	freq = policy->freq_table[index].frequency;
> >  	arch_set_freq_scale(policy->related_cpus, freq,
> > @@ -171,14 +183,24 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
> >  	}
> >  
> >  	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> > -		data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
> > -				      i * soc_data->lut_row_size);
> > +		ret = regmap_read(drv_data->regmap, soc_data->reg_freq_lut +
> > +				  i * soc_data->lut_row_size, &data);
> > +		if (ret) {
> > +			kfree(table);
> > +			return ret;
> > +		}
> > +
> >  		src = FIELD_GET(LUT_SRC, data);
> >  		lval = FIELD_GET(LUT_L_VAL, data);
> >  		core_count = FIELD_GET(LUT_CORE_COUNT, data);
> >  
> > -		data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
> > -				      i * soc_data->lut_row_size);
> > +		ret = regmap_read(drv_data->regmap, soc_data->reg_volt_lut +
> > +				  i * soc_data->lut_row_size, &data);
> > +		if (ret) {
> > +			kfree(table);
> > +			return ret;
> > +		}
> > +
> >  		volt = FIELD_GET(LUT_VOLT, data) * 1000;
> >  
> >  		if (src)
> > @@ -248,6 +270,13 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
> >  	}
> >  }
> >  
> > +static struct regmap_config qcom_cpufreq_regmap = {
> > +	.reg_bits = 32,
> > +	.reg_stride = 4,
> > +	.val_bits = 32,
> > +	.fast_io = true,
> > +};
> > +
> >  static const struct qcom_cpufreq_soc_data qcom_soc_data = {
> >  	.reg_enable = 0x0,
> >  	.reg_freq_lut = 0x110,
> > @@ -274,6 +303,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> >  	struct qcom_cpufreq_data *data;
> >  	const struct of_device_id *match;
> >  	int ret, index;
> > +	u32 val;
> >  
> >  	cpu_dev = get_cpu_device(policy->cpu);
> >  	if (!cpu_dev) {
> > @@ -316,9 +346,18 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> >  
> >  	data->soc_data = match->data;
> >  	data->base = base;
> > +	data->regmap = devm_regmap_init_mmio(dev, base, &qcom_cpufreq_regmap);
> > +	if (IS_ERR(data->regmap)) {
> > +		ret = PTR_ERR(data->regmap);
> > +		goto error;
> > +	}
> >  
> >  	/* HW should be in enabled state to proceed */
> > -	if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
> > +	ret = regmap_read(data->regmap, data->soc_data->reg_enable, &val);
> > +	if (ret)
> > +		goto error;
> > +
> > +	if (!(val & 0x1)) {
> >  		dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
> >  		ret = -ENODEV;
> >  		goto error;
> > -- 
> > 2.17.1
> 
> -- 
> viresh