From: Krzysztof Kozlowski <krzk@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Krzysztof Opasiak <k.opasiak@samsung.com>,
Kukjin Kim <kgene@kernel.org>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-nfc@lists.01.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 1/8] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema
Date: Thu, 10 Sep 2020 18:12:12 +0200 [thread overview]
Message-ID: <20200910161219.6237-2-krzk@kernel.org> (raw)
In-Reply-To: <20200910161219.6237-1-krzk@kernel.org>
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema.
This is conversion only so it includes properties with invalid prefixes
(s3fwrn5,en-gpios) which should be addressed later.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 --------
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 62 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
create mode 100644 Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
deleted file mode 100644
index f02f6fb7f81c..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Samsung S3FWRN5 NCI NFC Controller
-
-Required properties:
-- compatible: Should be "samsung,s3fwrn5-i2c".
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
-- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
- sleep/wakeup control
-
-Example:
-
-&hsi2c_4 {
- s3fwrn5@27 {
- compatible = "samsung,s3fwrn5-i2c";
-
- reg = <0x27>;
-
- interrupt-parent = <&gpa1>;
- interrupts = <3 0 0>;
-
- s3fwrn5,en-gpios = <&gpf1 4 0>;
- s3fwrn5,fw-gpios = <&gpj0 2 0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 000000000000..f43d31a2d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Krzysztof Opasiak <k.opasiak@samsung.com>
+
+properties:
+ compatible:
+ const: samsung,s3fwrn5-i2c
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ s3fwrn5,en-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used for enabling/disabling the chip
+
+ s3fwrn5,fw-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - reg
+ - s3fwrn5,en-gpios
+ - s3fwrn5,fw-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&gpa1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+ s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ac79fdbdf8d0..ec4f1d9cb3dc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Supported
+F: Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
F: drivers/nfc/s3fwrn5
SAMSUNG S5C73M3 CAMERA DRIVER
--
2.17.1
next prev parent reply other threads:[~2020-09-10 18:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 16:12 [PATCH v3 0/8] nfc: s3fwrn5: Few cleanups Krzysztof Kozlowski
2020-09-10 16:12 ` Krzysztof Kozlowski [this message]
2020-09-10 16:12 ` [PATCH v3 2/8] dt-bindings: net: nfc: s3fwrn5: Remove wrong vendor prefix from GPIOs Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 3/8] " Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 4/8] nfc: s3fwrn5: Remove unneeded 'ret' variable Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 5/8] nfc: s3fwrn5: Add missing CRYPTO_HASH dependency Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 6/8] nfc: s3fwrn5: Constify s3fwrn5_fw_info when not modified Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 7/8] MAINTAINERS: Add Krzysztof Kozlowski to Samsung S3FWRN5 and remove Robert Krzysztof Kozlowski
2020-09-10 16:12 ` [PATCH v3 8/8] arm64: dts: exynos: Use newer S3FWRN5 GPIO properties in Exynos5433 TM2 Krzysztof Kozlowski
2020-09-10 22:22 ` [PATCH v3 0/8] nfc: s3fwrn5: Few cleanups David Miller
2020-09-11 6:08 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910161219.6237-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=k.opasiak@samsung.com \
--cc=kgene@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfc@lists.01.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).