From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
linux-kernel@vger.kernel.org (open list),
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Taniya Das <tdas@codeaurora.org>
Subject: [PATCH v3 0/7] SM8150 and SM8250 dispcc drivers
Date: Fri, 11 Sep 2020 11:34:00 -0400 [thread overview]
Message-ID: <20200911153412.21672-1-jonathan@marek.ca> (raw)
Add display clock drivers required to get DSI and DP displays working on
SM8150 and SM8250 SoCs.
Derived from downstream drivers. Notable changes compared to downstream:
- EDP clks removed (nothing uses these even in downstream it seems)
- freq_tbl values for dp_link clk is in Hz and not kHz
v2:
- updated dts example to reflect the change (first patch)
- updated config_ctl_hi1_val in sm8250 dispcc to latest downstream
v3:
- combined dt-binding: "gcc_disp_gpll0_clk_src" is needed by sc7180 too
- use the right order in drivers/clk/qcom/Kconfig
Jonathan Marek (7):
dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as
sc7180
arm64: dts: qcom: sdm845-dispcc: same name for dp_phy clocks as sc7180
dt-bindings: clock: combine qcom,sdm845-dispcc and qcom,sc7180-dispcc
dt-bindings: clock: Introduce QCOM SM8150 display clock bindings
dt-bindings: clock: Introduce QCOM SM8250 display clock bindings
clk: qcom: Add display clock controller driver for SM8150
clk: qcom: Add display clock controller driver for SM8250
...om,sdm845-dispcc.yaml => qcom,dispcc.yaml} | 32 +-
.../bindings/clock/qcom,sc7180-dispcc.yaml | 86 --
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +-
drivers/clk/qcom/Kconfig | 18 +
drivers/clk/qcom/Makefile | 2 +
drivers/clk/qcom/dispcc-sm8150.c | 1152 +++++++++++++++++
drivers/clk/qcom/dispcc-sm8250.c | 1100 ++++++++++++++++
.../dt-bindings/clock/qcom,dispcc-sm8150.h | 69 +
.../dt-bindings/clock/qcom,dispcc-sm8250.h | 66 +
9 files changed, 2430 insertions(+), 99 deletions(-)
rename Documentation/devicetree/bindings/clock/{qcom,sdm845-dispcc.yaml => qcom,dispcc.yaml} (74%)
delete mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
create mode 100644 drivers/clk/qcom/dispcc-sm8150.c
create mode 100644 drivers/clk/qcom/dispcc-sm8250.c
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8150.h
create mode 100644 include/dt-bindings/clock/qcom,dispcc-sm8250.h
--
2.26.1
next reply other threads:[~2020-09-11 16:14 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 15:34 Jonathan Marek [this message]
2020-09-11 15:34 ` [PATCH v3 1/7] dt-bindings: clock: sdm845-dispcc: same name for dp_phy clocks as sc7180 Jonathan Marek
2020-09-22 22:57 ` Rob Herring
2020-09-11 15:34 ` [PATCH v3 2/7] arm64: dts: qcom: " Jonathan Marek
2020-09-11 15:34 ` [PATCH v3 3/7] dt-bindings: clock: combine qcom,sdm845-dispcc and qcom,sc7180-dispcc Jonathan Marek
2020-09-22 19:02 ` Stephen Boyd
2020-09-11 15:34 ` [PATCH v3 4/7] dt-bindings: clock: Introduce QCOM SM8150 display clock bindings Jonathan Marek
2020-09-11 15:34 ` [PATCH v3 5/7] dt-bindings: clock: Introduce QCOM SM8250 " Jonathan Marek
2020-09-22 19:04 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200911153412.21672-1-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).