[PATCH v3 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw

[Grygorii Strashko <grygorii.strashko@ti.com>]

Hi All,

This series adds DT nodes for TI J7200 SoC
- Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
  with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking and board data

This series depends on:
 - [PATCH v4 0/5] arm64: Initial support for Texas Instrument's J7200 Platform [1]
   from: Lokesh Vutla <lokeshvutla@ti.com>

[1] https://patchwork.kernel.org/cover/11774429/

Changes in v3:
 - rebase on top of [1]
 - updated dependencies
 - added tested-by

Changes in v2:
 - fixed DT build warnings (Nishanth Menon)

v1: https://lore.kernel.org/patchwork/cover/1301067/

Grygorii Strashko (3):
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs

Peter Ujfalusi (1):
  arm64: dts: ti: k3-j7200: add DMA support

 .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  48 +++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
 3 files changed, 211 insertions(+)

-- 
2.17.1