[RESEND PATCH v3 1/2] ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell

[RESEND PATCH v3 1/2] ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell

[Krzysztof Kozlowski]

The PCA95xx GPIO expander requires GPIO controller properties to operate
properly.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts | 2 ++
 1 file changed, 2 insertions(+)

The dt-schema changes were applied.

diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 4a1ca8f5b6a7..03c161493ffc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -121,6 +121,8 @@
 	pca9555@27 {
 		compatible = "nxp,pca9555";
 		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
 };
 
-- 
2.17.1

[RESEND PATCH v3 2/2] ARM: dts: aspeed: align GPIO hog names with dtschema

[Krzysztof Kozlowski]

dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts |  2 +-
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts  | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 21ae880c7530..d5ac379c909e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -564,7 +564,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		smbus0 {
+		smbus0-hog {
 			gpio-hog;
 			gpios = <4 GPIO_ACTIVE_HIGH>;
 			output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index cb85168f6761..577c211c469e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -827,7 +827,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus0 {
+				smbus0-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -852,7 +852,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus1 {
+				smbus1-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -900,7 +900,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus2 {
+				smbus2-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -925,7 +925,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus3 {
+				smbus3-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -992,7 +992,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus4 {
+				smbus4-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -1017,7 +1017,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus5 {
+				smbus5-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -1065,7 +1065,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus6 {
+				smbus6-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
@@ -1090,7 +1090,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 
-				smbus7 {
+				smbus7-hog {
 					gpio-hog;
 					gpios = <4 GPIO_ACTIVE_HIGH>;
 					output-high;
-- 
2.17.1