[PATCH] Docs: Fixing Spelling errors in Documentation/devicetree/bindings/

[Marlon Rac Cambasis <marlonrc08@gmail.com>]

Fixing three spelling errors within Documentation/devicetree/bindings.
"specfied" replaced with "specified" in all three files modified. This
should hopefully reduce any confusion that a reader might have.

Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
---
 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt  | 2 +-
 Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +-
 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt      | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 70659c917bdc..372f473e80c4 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -75,7 +75,7 @@ Required Properties:
   The child node should contain a list of pin(s) on which a particular pin
   function selection or pin configuration (or both) have to applied. This
   list of pins is specified using the property name "samsung,pins". There
-  should be atleast one pin specfied for this property and there is no upper
+  should be atleast one pin specified for this property and there is no upper
   limit on the count of pins that can be specified. The pins are specified
   using pin names which are derived from the hardware manual of the SoC. As
   an example, the pins in GPA0 bank of the pin controller can be represented
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
index 6e802703af60..17b7a6a43a29 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
@@ -9,7 +9,7 @@ Optional property:
 - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
   NPCM7xx contain four software reset that represent numbers 1 to 4.
 
-  If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.
+  If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
 
 Example:
 	rstc: rstc@f0801000 {
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index d78d4a8fb868..a8197632d6d2 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -20,7 +20,7 @@ Optional properties:
    This is useful in situations where another watchdog engine on chip is
    to perform the reset.
 
-   If 'aspeed,reset-type=' is not specfied the default is to enable system
+   If 'aspeed,reset-type=' is not specified the default is to enable system
    reset.
 
    Reset types:
-- 
2.20.1