From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>, <robh+dt@kernel.org>, <nsaenzjulienne@suse.de>
Cc: <patches@opensource.cirrus.com>, <alsa-devel@alsa-project.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-rpi-kernel@lists.infradead.org>,
Richard Fitzgerald <rf@opensource.cirrus.com>
Subject: [PATCH 2/7] ASoC: simple-card: Add plls and sysclks DT schema
Date: Wed, 14 Oct 2020 15:54:13 +0100 [thread overview]
Message-ID: <20201014145418.31838-3-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20201014145418.31838-1-rf@opensource.cirrus.com>
This adds the two new properties 'plls' and 'sysclks' to the dt bindings
schema document. These add the ability to set values that will be
passed to snd_soc_component_set_sysclk() and snd_soc_component_set_pll().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
.../bindings/sound/simple-card.yaml | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index 35e669020296..48c9a4313d58 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -92,6 +92,25 @@ definitions:
description: the widget names for which pin switches must be created.
$ref: /schemas/types.yaml#/definitions/string-array
+ plls:
+ description: |
+ A list of component pll settings that will be applied with
+ snd_soc_component_set_pll. Each entry is a phandle to the node of the
+ codec or cpu component, followed by the four arguments id, source,
+ frequency_in, frequency_out. Multiple entries can have the same phandle
+ so that several plls can be set in the same component.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ sysclks:
+ description: |
+ A list of component sysclk settings that will be applied with
+ snd_soc_component_set_sysclk. Each entry is a phandle to the node of
+ the codec or cpu component, followed by the four arguments id, source,
+ frequency, direction. Direction is 0 if the clock is an input, 1 if it
+ is an output. Multiple entries can have the same phandle so that several
+ clocks can be set in the same component.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
format:
description: audio format.
items:
@@ -192,6 +211,10 @@ patternProperties:
$ref: "#/definitions/prefix"
"^simple-audio-card,pin-switches$":
$ref: "#/definitions/pin-switches"
+ "^simple-audio-card,plls$":
+ $ref: "#/definitions/plls"
+ "^simple-audio-card,sysclks$":
+ $ref: "#/definitions/sysclks"
"^simple-audio-card,hp-det-gpio$":
maxItems: 1
"^simple-audio-card,mic-det-gpio$":
@@ -489,3 +512,36 @@ examples:
};
};
};
+
+#--------------------
+# Codec with component PLL and SYSCLK settings
+#--------------------
+ - |
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,plls = <
+ &cs47l15 1 1 32768 98304000
+ >;
+
+ simple-audio-card,sysclks = <
+ &cs47l15 1 4 98304000 0
+ &cs47l15 8 4 147456000 0
+ >;
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&cs47l15_codec_dai>;
+ simple-audio-card,frame-master = <&cs47l15_codec_dai>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&axi_i2s0 0>;
+ };
+
+ cs47l15_codec_dai: simple-audio-card,codec {
+ sound-dai = <&cs47l15 0>;
+
+ /* Disable dai_set_sysclk() */
+ system-clock-frequency = <0>;
+ mclk-fs = <0>;
+ };
+ };
--
2.20.1
next prev parent reply other threads:[~2020-10-14 14:55 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 14:54 [PATCH 0/7] Add dts for Rpi4 + Cirrus Lochnagar and codecs Richard Fitzgerald
2020-10-14 14:54 ` [PATCH 1/7] of: base: Add of_count_phandle_with_fixed_args() Richard Fitzgerald
2020-10-14 18:39 ` Rob Herring
2020-10-15 16:52 ` Robin Murphy
2020-10-16 9:10 ` Richard Fitzgerald
2020-10-16 13:31 ` Rob Herring
2020-10-16 15:14 ` Richard Fitzgerald
2020-10-14 14:54 ` Richard Fitzgerald [this message]
2020-10-14 14:54 ` [PATCH 3/7] ASoC: simple-card: Support setting component plls and sysclks Richard Fitzgerald
2020-10-14 14:54 ` [PATCH 4/7] ASoC: arizona: Allow codecs to be selected from kernel config Richard Fitzgerald
2020-10-15 0:19 ` kernel test robot
2020-10-14 14:54 ` [PATCH 5/7] ASoC: madera: " Richard Fitzgerald
2020-10-14 14:54 ` [PATCH 6/7] ARM: dts: Add dts for Raspberry Pi 4 + Cirrus Logic Lochnagar2 Richard Fitzgerald
2020-10-15 10:25 ` Nicolas Saenz Julienne
2020-10-15 11:14 ` Richard Fitzgerald
2020-10-15 15:12 ` Nicolas Saenz Julienne
2020-10-15 17:32 ` Mark Brown
2020-10-16 9:01 ` Richard Fitzgerald
2020-10-14 14:54 ` [PATCH 7/7] MAINTAINERS: Add dts for Cirrus Logic Lochnagar on RPi4 Richard Fitzgerald
2020-10-14 18:56 ` [PATCH 0/7] Add dts for Rpi4 + Cirrus Lochnagar and codecs Mark Brown
2020-10-16 13:30 ` Richard Fitzgerald
2020-10-16 15:18 ` Mark Brown
2020-10-19 20:48 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014145418.31838-3-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=patches@opensource.cirrus.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).