From: kholk11@gmail.com
To: todor.too@gmail.com
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
mchehab@kernel.org, robh+dt@kernel.org, marijns95@gmail.com,
konradybcio@gmail.com, martin.botka1@gmail.com,
linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
robert.foss@linaro.org,
AngeloGioacchino Del Regno <kholk11@gmail.com>
Subject: [PATCH v2 2/7] media: camss: vfe-4-7: Rename get_ub_size, set_qos, set_ds, wm_enable
Date: Thu, 22 Oct 2020 19:47:01 +0200 [thread overview]
Message-ID: <20201022174706.8813-3-kholk11@gmail.com> (raw)
In-Reply-To: <20201022174706.8813-1-kholk11@gmail.com>
From: AngeloGioacchino Del Regno <kholk11@gmail.com>
In preparation to add support for VFE 4.8, rename these functions
by adding the vfe version that they are referred to (for example,
vfe_get_ub_size -> vfe47_get_ub_size), as these are the only ones
that will be different for the VFE version 4.8.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
.../media/platform/qcom/camss/camss-vfe-4-7.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index 0dca8bf9281e..6f380a450ca1 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -246,7 +246,7 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
dev_err(dev, "VFE HW Version = 0x%08x\n", hw_version);
}
-static u16 vfe_get_ub_size(u8 vfe_id)
+static u16 vfe47_get_ub_size(u8 vfe_id)
{
if (vfe_id == 0)
return MSM_VFE_VFE0_UB_SIZE_RDI;
@@ -299,7 +299,7 @@ static void vfe_halt_clear(struct vfe_device *vfe)
writel_relaxed(0x0, vfe->base + VFE_0_BUS_BDG_CMD);
}
-static void vfe_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
+static void vfe47_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
{
if (enable)
vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
@@ -883,7 +883,7 @@ static void vfe_set_clamp_cfg(struct vfe_device *vfe)
writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MIN_CFG);
}
-static void vfe_set_qos(struct vfe_device *vfe)
+static void vfe47_set_qos(struct vfe_device *vfe)
{
u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
@@ -898,7 +898,7 @@ static void vfe_set_qos(struct vfe_device *vfe)
writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
}
-static void vfe_set_ds(struct vfe_device *vfe)
+static void vfe47_set_ds(struct vfe_device *vfe)
{
u32 val = VFE_0_BUS_BDG_DS_CFG_0_CFG;
u32 val16 = VFE_0_BUS_BDG_DS_CFG_16_CFG;
@@ -1098,11 +1098,11 @@ static irqreturn_t vfe_isr(int irq, void *dev)
const struct vfe_hw_ops vfe_ops_4_7 = {
.hw_version_read = vfe_hw_version_read,
- .get_ub_size = vfe_get_ub_size,
+ .get_ub_size = vfe47_get_ub_size,
.global_reset = vfe_global_reset,
.halt_request = vfe_halt_request,
.halt_clear = vfe_halt_clear,
- .wm_enable = vfe_wm_enable,
+ .wm_enable = vfe47_wm_enable,
.wm_frame_based = vfe_wm_frame_based,
.wm_line_based = vfe_wm_line_based,
.wm_set_framedrop_period = vfe_wm_set_framedrop_period,
@@ -1128,8 +1128,8 @@ const struct vfe_hw_ops vfe_ops_4_7 = {
.set_scale_cfg = vfe_set_scale_cfg,
.set_crop_cfg = vfe_set_crop_cfg,
.set_clamp_cfg = vfe_set_clamp_cfg,
- .set_qos = vfe_set_qos,
- .set_ds = vfe_set_ds,
+ .set_qos = vfe47_set_qos,
+ .set_ds = vfe47_set_ds,
.set_cgc_override = vfe_set_cgc_override,
.set_camif_cfg = vfe_set_camif_cfg,
.set_camif_cmd = vfe_set_camif_cmd,
--
2.28.0
next prev parent reply other threads:[~2020-10-22 17:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-22 17:46 [PATCH v2 0/7] Add support for SDM630/660 Camera Subsystem kholk11
2020-10-22 17:47 ` [PATCH v2 1/7] media: camss: ispif: Correctly reset based on the VFE ID kholk11
2022-05-25 9:03 ` Vladimir Zapolskiy
2022-05-25 11:33 ` Dmitry Baryshkov
2020-10-22 17:47 ` kholk11 [this message]
2020-10-22 17:47 ` [PATCH v2 3/7] media: camss: vfe: Add support for VFE 4.8 kholk11
2020-10-22 17:47 ` [PATCH v2 4/7] media: camss: Add support for SDM630/636/660 camera subsystem kholk11
2020-10-22 17:47 ` [PATCH v2 5/7] media: camss: csiphy-3ph: Add support for SDM630/660 kholk11
2020-10-22 17:47 ` [PATCH v2 6/7] media: dt-bindings: media: qcom,camss: Add bindings for SDM660 camss kholk11
2020-10-30 15:43 ` Rob Herring
2020-10-22 17:47 ` [PATCH v2 7/7] media: camss: csiphy: Set rate on csiX_phy clock on SDM630/660 kholk11
2020-10-26 19:50 ` [PATCH v2 0/7] Add support for SDM630/660 Camera Subsystem Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201022174706.8813-3-kholk11@gmail.com \
--to=kholk11@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marijns95@gmail.com \
--cc=martin.botka1@gmail.com \
--cc=mchehab@kernel.org \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).