Re: [PATCH v3 1/2] bindings: pm8941-misc: Convert to YAML and add support for VBUS detection

[Rob Herring <robh@kernel.org>]

On Thu, Oct 22, 2020 at 02:47:43PM -0700, Guru Das Srinagesh wrote:
> From: Anirudh Ghayal <aghayal@codeaurora.org>
> 
> Convert bindings to YAML. Also add compatible string that adds support
> for reporting the VBUS status that can be detected via a dedicated PMIC
> pin.

Converting to yaml and add Vbus support should be 2 patches.

Really, the main pm8941 needs to be converted and then this one 
referenced by it.

> 
> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> ---
>  .../bindings/extcon/qcom,pm8941-misc.txt           | 41 --------------
>  .../bindings/extcon/qcom,pm8941-misc.yaml          | 65 ++++++++++++++++++++++
>  2 files changed, 65 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
>  create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
> deleted file mode 100644
> index 35383adb..0000000
> --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Qualcomm's PM8941 USB ID Extcon device
> -
> -Some Qualcomm PMICs have a "misc" module that can be used to detect when
> -the USB ID pin has been pulled low or high.
> -
> -PROPERTIES
> -
> -- compatible:
> -    Usage: required
> -    Value type: <string>
> -    Definition: Should contain "qcom,pm8941-misc";
> -
> -- reg:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Should contain the offset to the misc address space
> -
> -- interrupts:
> -    Usage: required
> -    Value type: <prop-encoded-array>
> -    Definition: Should contain the usb id interrupt
> -
> -- interrupt-names:
> -    Usage: required
> -    Value type: <stringlist>
> -    Definition: Should contain the string "usb_id" for the usb id interrupt
> -
> -Example:
> -
> -	pmic {
> -		usb_id: misc@900 {
> -			compatible = "qcom,pm8941-misc";
> -			reg = <0x900>;
> -			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
> -			interrupt-names = "usb_id";
> -		};
> -	}
> -
> -	usb-controller {
> -		extcon = <&usb_id>;
> -	};
> diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> new file mode 100644
> index 0000000..f422546
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
> +
> +maintainers:
> +  - Guru Das Srinagesh <gurus@codeaurora.org>
> +
> +description: |
> +  Some Qualcomm PMICs have a "misc" module that can be used to detect when
> +  the USB ID pin has been pulled low or high.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

Don't need oneOf for a single entry.

> +          - enum:
> +              - qcom,pm8941-misc
> +              - qcom,pmd-vbus-det
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 2

Need 'minItems: 1' if 1 or 2 interrupts is valid.

> +
> +  interrupt-names:
> +    anyOf:
> +      - items:

Don't need 'anyOf'

> +          - enum:
> +              - usb_id
> +              - usb_vbus

I think what you want here is:

minItems: 1
items:
  - const: usb_id
  - const: usb_vbus

Meaning 'usb_id' is always present and 'usb_vbus' is optional 2nd 
interrupt.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    pmic {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            interrupt-controller;
> +            #interrupt-cells = <4>;
> +
> +            usb_id: misc@900 {
> +                    compatible = "qcom,pm8941-misc";
> +                    reg = <0x900>;
> +                    interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
> +                    interrupt-names = "usb_id";
> +            };
> +    };
> +
> +    usb-controller {
> +           extcon = <&usb_id>;
> +    };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>