From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Jonathan Bakker <xc-racer2@live.ca>,
Sasha Levin <sashal@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH AUTOSEL 4.9 30/30] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node
Date: Mon, 26 Oct 2020 20:10:44 -0400 [thread overview]
Message-ID: <20201027001044.1027349-30-sashal@kernel.org> (raw)
In-Reply-To: <20201027001044.1027349-1-sashal@kernel.org>
From: Krzysztof Kozlowski <krzk@kernel.org>
[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]
The 'audio-subsystem' node is an artificial creation, not representing
real hardware. The hardware is described by its nodes - AUDSS clock
controller and I2S0.
Remove the 'audio-subsystem' node along with its undocumented compatible
to fix dtbs_check warnings like:
audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
1 file changed, 29 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index afc3eac0aba78..798f676041e09 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -220,43 +220,36 @@ i2c2: i2c@e1a00000 {
status = "disabled";
};
- audio-subsystem {
- compatible = "samsung,s5pv210-audss", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clk_audss: clock-controller@eee10000 {
- compatible = "samsung,s5pv210-audss-clock";
- reg = <0xeee10000 0x1000>;
- clock-names = "hclk", "xxti",
- "fout_epll",
- "sclk_audio0";
- clocks = <&clocks DOUT_HCLKP>, <&xxti>,
- <&clocks FOUT_EPLL>,
- <&clocks SCLK_AUDIO0>;
- #clock-cells = <1>;
- };
+ clk_audss: clock-controller@eee10000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xeee10000 0x1000>;
+ clock-names = "hclk", "xxti",
+ "fout_epll",
+ "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>,
+ <&clocks SCLK_AUDIO0>;
+ #clock-cells = <1>;
+ };
- i2s0: i2s@eee30000 {
- compatible = "samsung,s5pv210-i2s";
- reg = <0xeee30000 0x1000>;
- interrupt-parent = <&vic2>;
- interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
- clock-names = "iis",
- "i2s_opclk0",
- "i2s_opclk1";
- clocks = <&clk_audss CLK_I2S>,
- <&clk_audss CLK_I2S>,
- <&clk_audss CLK_DOUT_AUD_BUS>;
- samsung,idma-addr = <0xc0010000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
+ i2s0: i2s@eee30000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0xeee30000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <16>;
+ dma-names = "rx", "tx", "tx-sec";
+ dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ clock-names = "iis",
+ "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ samsung,idma-addr = <0xc0010000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
};
i2s1: i2s@e2100000 {
--
2.25.1
prev parent reply other threads:[~2020-10-27 0:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20201027001044.1027349-1-sashal@kernel.org>
2020-10-27 0:10 ` [PATCH AUTOSEL 4.9 28/30] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings Sasha Levin
2020-10-27 0:10 ` [PATCH AUTOSEL 4.9 29/30] ARM: dts: s5pv210: move PMU node out of clock controller Sasha Levin
2020-10-27 0:10 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201027001044.1027349-30-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=xc-racer2@live.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).