From: Dan Murphy <dmurphy@ti.com>
To: <davem@davemloft.net>, <andrew@lunn.ch>, <f.fainelli@gmail.com>,
<hkallweit1@gmail.com>, <robh@kernel.org>
Cc: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next v3 0/4] DP83TD510 Single Pair 10Mbps Ethernet PHY
Date: Fri, 30 Oct 2020 12:29:46 -0500 [thread overview]
Message-ID: <20201030172950.12767-1-dmurphy@ti.com> (raw)
Hello
The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The
PHY is capable of 10Mbps communication over long distances and exceeds the
IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification. The PHY supports
various voltage level signalling and can be forced to support a specific
voltage or allowed to perfrom auto negotiation on the voltage level. The
default for the PHY is auto negotiation but if the PHY is forced to a specific
voltage then the LP must also support the same voltage.
Add the 10BASE-T1L linkmodes for ethtool to properly advertise the PHY's
capability.
Dan
Dan Murphy (4):
ethtool: Add 10base-T1L link mode entries
dt-bindings: net: Add Rx/Tx output configuration for 10base T1L
dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
.../devicetree/bindings/net/ethernet-phy.yaml | 5 +
.../devicetree/bindings/net/ti,dp83td510.yaml | 62 ++
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83td510.c | 681 ++++++++++++++++++
drivers/net/phy/phy-core.c | 4 +-
include/uapi/linux/ethtool.h | 2 +
net/ethtool/common.c | 2 +
net/ethtool/linkmodes.c | 2 +
9 files changed, 764 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
create mode 100644 drivers/net/phy/dp83td510.c
--
2.28.0.585.ge1cfff676549
next reply other threads:[~2020-10-30 17:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 17:29 Dan Murphy [this message]
2020-10-30 17:29 ` [PATCH net-next v3 1/4] ethtool: Add 10base-T1L link mode entries Dan Murphy
2020-10-30 19:43 ` Andrew Lunn
2020-11-05 2:42 ` Florian Fainelli
2020-10-30 17:29 ` [PATCH net-next v3 2/4] dt-bindings: net: Add Rx/Tx output configuration for 10base T1L Dan Murphy
2020-10-30 19:56 ` Andrew Lunn
2020-11-03 16:52 ` Dan Murphy
2020-11-03 17:07 ` Andrew Lunn
2020-11-04 22:08 ` Rob Herring
2020-10-30 17:29 ` [PATCH net-next v3 3/4] dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY Dan Murphy
2020-10-31 9:27 ` Ioana Ciornei
2020-11-02 17:12 ` Rob Herring
2020-10-30 17:29 ` [PATCH net-next v3 4/4] net: phy: dp83td510: Add support for the " Dan Murphy
2020-10-30 20:15 ` Andrew Lunn
2020-11-03 17:07 ` Dan Murphy
2020-11-03 17:18 ` Andrew Lunn
2020-11-03 17:35 ` Dan Murphy
2020-11-05 3:03 ` Florian Fainelli
2020-10-30 23:03 ` Jakub Kicinski
2020-11-03 17:09 ` Dan Murphy
2020-11-03 17:21 ` Andrew Lunn
2020-11-03 17:23 ` Dan Murphy
2020-11-03 17:38 ` Andrew Lunn
2020-10-31 9:18 ` Ioana Ciornei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201030172950.12767-1-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).