From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [linux-sunxi] [PATCH v2] arm64: dts: allwinner: h6: PineH64 model B: Add wifi
Date: Sat, 31 Oct 2020 22:12:51 +0100 [thread overview]
Message-ID: <20201031211251.GA6511@Red> (raw)
In-Reply-To: <20201030172530.1096394-1-jernej.skrabec@siol.net>
On Fri, Oct 30, 2020 at 06:25:30PM +0100, Jernej Skrabec wrote:
> PineH64 model B contains RTL8723CS wifi+bt combo module.
>
> Since bluetooth support is not yet squared away, only wifi is enabled
> for now.
>
> Acked-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> Changes from v1:
> - added Chen-Yu tag
> - added vqmmc-supply
>
> .../dts/allwinner/sun50i-h6-pine-h64-model-b.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> index f4c8966a6497..7fea1e4e2d49 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> @@ -10,6 +10,12 @@ / {
> compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
>
> /delete-node/ reg_gmac_3v3;
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
> + post-power-on-delay-ms = <200>;
> + };
> };
>
> &hdmi_connector {
> @@ -19,3 +25,12 @@ &hdmi_connector {
> &emac {
> phy-supply = <®_aldo2>;
> };
> +
> +&mmc1 {
> + vmmc-supply = <®_cldo3>;
> + vqmmc-supply = <®_aldo1>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> --
Hello
Tested-by: <clabbe.montjoie@gmail.com>
RTL8723CS driver probe and related iwlist commands works. (like listing availlable channels)
But connecting to a wireless network was not successfully tested yet. (I need to set a test network).
Regards
next prev parent reply other threads:[~2020-10-31 21:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 17:25 [PATCH v2] arm64: dts: allwinner: h6: PineH64 model B: Add wifi Jernej Skrabec
2020-10-31 21:12 ` Corentin Labbe [this message]
2020-11-02 10:23 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201031211251.GA6511@Red \
--to=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).