From: Joakim Zhang <qiangqing.zhang@nxp.com>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, festevam@gmail.com
Cc: linux-imx@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: imx8mn-evk: add IR support
Date: Mon, 2 Nov 2020 10:25:27 +0800 [thread overview]
Message-ID: <20201102022527.14265-4-qiangqing.zhang@nxp.com> (raw)
In-Reply-To: <20201102022527.14265-1-qiangqing.zhang@nxp.com>
Add IR support on i.MX8MN EVK board.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index fda890589a09..76d042a4cf09 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -38,6 +38,14 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir>;
+ linux,autosuspend-period = <125>;
+ };
};
&fec1 {
@@ -202,6 +210,12 @@
>;
};
+ pinctrl_ir: irgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
--
2.17.1
next prev parent reply other threads:[~2020-11-02 2:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-02 2:25 [PATCH 0/3] arm64: dts: imx8m: add IR support Joakim Zhang
2020-11-02 2:25 ` [PATCH 1/3] arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR Joakim Zhang
2020-11-02 2:25 ` [PATCH 2/3] arm64: dts: imx8mm-evk: add IR support Joakim Zhang
2020-11-02 2:25 ` Joakim Zhang [this message]
2020-11-10 0:54 ` [PATCH 0/3] arm64: dts: imx8m: " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102022527.14265-4-qiangqing.zhang@nxp.com \
--to=qiangqing.zhang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).