* [PATCH v3 1/3] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove reg attribute
[not found] <20201104135631.1550125-1-narmstrong@baylibre.com>
@ 2020-11-04 13:56 ` Neil Armstrong
2020-11-04 13:56 ` [PATCH v3 2/3] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove phy cell parameter Neil Armstrong
2020-11-04 13:56 ` [PATCH v3 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog Neil Armstrong
2 siblings, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2020-11-04 13:56 UTC (permalink / raw)
To: kishon, repk, devicetree
Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
Rob Herring
The PHY registers happens to be at the beginning of a large zone containing
interleaved system registers (mainly clocks, power management, PHY control..),
found in all Amlogic SoC so far.
The goal is to model it the same way as the other "features" of this zone,
like Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
and Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
and have a coherent bindings scheme over the Amlogic SoCs.
This update the description, removed the reg attribute then updates the example
accordingly.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 18c1ec5e19ad..702763a84dac 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -9,27 +9,32 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY
maintainers:
- Remi Pommarel <repk@triplefau.lt>
+description: |+
+ The Everything-Else Power Domains node should be the child of a syscon
+ node with the required property:
+
+ - compatible: Should be the following:
+ "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+ Refer to the the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
properties:
compatible:
const: amlogic,axg-mipi-pcie-analog-phy
- reg:
- maxItems: 1
-
"#phy-cells":
const: 1
required:
- compatible
- - reg
- "#phy-cells"
additionalProperties: false
examples:
- |
- mpphy: phy@0 {
+ mpphy: phy {
compatible = "amlogic,axg-mipi-pcie-analog-phy";
- reg = <0x0 0xc>;
#phy-cells = <1>;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v3 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
[not found] <20201104135631.1550125-1-narmstrong@baylibre.com>
2020-11-04 13:56 ` [PATCH v3 1/3] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove reg attribute Neil Armstrong
2020-11-04 13:56 ` [PATCH v3 2/3] dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove phy cell parameter Neil Armstrong
@ 2020-11-04 13:56 ` Neil Armstrong
2 siblings, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2020-11-04 13:56 UTC (permalink / raw)
To: devicetree
Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
Remi Pommarel
The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param
to select a mode and implement runtime configuration & power on/off
for both functions since they are not exclusive.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Remi Pommarel <repk@triplefau.lt>
---
drivers/phy/amlogic/Kconfig | 1 +
.../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------
2 files changed, 136 insertions(+), 69 deletions(-)
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 99e8a4c7f1f3..db5d0cd757e3 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
depends on OF && (ARCH_MESON || COMPILE_TEST)
select GENERIC_PHY
select REGMAP_MMIO
+ select GENERIC_PHY_MIPI_DPHY
help
Enable this to support the Meson MIPI + PCIE analog PHY
found in Meson AXG SoCs.
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
index 1431cbf885e1..6eb21551bdd9 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -4,9 +4,13 @@
*
* Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
*/
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>
@@ -14,10 +18,10 @@
#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
#define HHI_MIPI_CNTL0_ENABLE BIT(29)
#define HHI_MIPI_CNTL0_BANDGAP BIT(26)
-#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
-#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
+#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16)
+#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
-#define HHI_MIPI_CNTL1 0x01
+#define HHI_MIPI_CNTL1 0x04
#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
@@ -25,100 +29,170 @@
#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
-#define HHI_MIPI_CNTL2 0x02
+#define HHI_MIPI_CNTL2 0x08
#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
-#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
+#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
+#define DSI_LANE_0 (1 << 4)
+#define DSI_LANE_1 (1 << 3)
+#define DSI_LANE_CLK (1 << 2)
+#define DSI_LANE_2 (1 << 1)
+#define DSI_LANE_3 (1 << 0)
+#define DSI_LANE_MASK (0x1F)
+
struct phy_axg_mipi_pcie_analog_priv {
struct phy *phy;
- unsigned int mode;
struct regmap *regmap;
+ bool dsi_configured;
+ bool dsi_enabled;
+ bool powered;
+ struct phy_configure_opts_mipi_dphy config;
};
-static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
- .reg_bits = 8,
- .val_bits = 32,
- .reg_stride = 4,
- .max_register = HHI_MIPI_CNTL2,
-};
+static void phy_bandgap_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
-static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
+}
+
+static void phy_bandgap_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
{
- struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_BANDGAP, 0);
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_ENABLE, 0);
+}
- /* MIPI not supported yet */
- if (priv->mode != PHY_TYPE_PCIE)
- return -EINVAL;
+static void phy_dsi_analog_enable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
+ u32 reg;
regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
- HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
+ HHI_MIPI_CNTL0_DIF_REF_CTL1,
+ FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0x1b8));
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ BIT(31), BIT(31));
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_DIF_REF_CTL0,
+ FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8));
+
+ regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x001e);
+
+ regmap_write(priv->regmap, HHI_MIPI_CNTL2,
+ (0x26e0 << 16) | (0x459 << 0));
+
+ reg = DSI_LANE_CLK;
+ switch (priv->config.lanes) {
+ case 4:
+ reg |= DSI_LANE_3;
+ fallthrough;
+ case 3:
+ reg |= DSI_LANE_2;
+ fallthrough;
+ case 2:
+ reg |= DSI_LANE_1;
+ fallthrough;
+ case 1:
+ reg |= DSI_LANE_0;
+ break;
+ default:
+ reg = 0;
+ }
+
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
+ HHI_MIPI_CNTL2_CH_EN,
+ FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
+
+ priv->dsi_enabled = true;
+}
+static void phy_dsi_analog_disable(struct phy_axg_mipi_pcie_analog_priv *priv)
+{
regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
- HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
- return 0;
+ HHI_MIPI_CNTL0_DIF_REF_CTL1,
+ FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0));
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0, BIT(31), 0);
+ regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
+ HHI_MIPI_CNTL0_DIF_REF_CTL1, 0);
+
+ regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0x6);
+
+ regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0x00200000);
+
+ priv->dsi_enabled = false;
}
-static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
+static int phy_axg_mipi_pcie_analog_configure(struct phy *phy,
+ union phy_configure_opts *opts)
{
struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+ int ret;
- /* MIPI not supported yet */
- if (priv->mode != PHY_TYPE_PCIE)
- return -EINVAL;
+ ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+ if (ret)
+ return ret;
+
+ memcpy(&priv->config, opts, sizeof(priv->config));
+
+ priv->dsi_configured = true;
+
+ /* If PHY was already powered on, setup the DSI analog part */
+ if (priv->powered) {
+ /* If reconfiguring, disable & reconfigure */
+ if (priv->dsi_enabled)
+ phy_dsi_analog_disable(priv);
+
+ usleep_range(100, 200);
+
+ phy_dsi_analog_enable(priv);
+ }
- regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
- HHI_MIPI_CNTL0_BANDGAP, 0);
- regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
- HHI_MIPI_CNTL0_ENABLE, 0);
return 0;
}
-static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
+static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
{
+ struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+ phy_bandgap_enable(priv);
+
+ if (priv->dsi_configured)
+ phy_dsi_analog_enable(priv);
+
+ priv->powered = true;
+
return 0;
}
-static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
+static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
{
+ struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
+
+ phy_bandgap_disable(priv);
+
+ if (priv->dsi_enabled)
+ phy_dsi_analog_disable(priv);
+
+ priv->powered = false;
+
return 0;
}
static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
- .init = phy_axg_mipi_pcie_analog_init,
- .exit = phy_axg_mipi_pcie_analog_exit,
+ .configure = phy_axg_mipi_pcie_analog_configure,
.power_on = phy_axg_mipi_pcie_analog_power_on,
.power_off = phy_axg_mipi_pcie_analog_power_off,
.owner = THIS_MODULE,
};
-static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
- struct of_phandle_args *args)
-{
- struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
- unsigned int mode;
-
- if (args->args_count != 1) {
- dev_err(dev, "invalid number of arguments\n");
- return ERR_PTR(-EINVAL);
- }
-
- mode = args->args[0];
-
- /* MIPI mode is not supported yet */
- if (mode != PHY_TYPE_PCIE) {
- dev_err(dev, "invalid phy mode select argument\n");
- return ERR_PTR(-EINVAL);
- }
-
- priv->mode = mode;
- return priv->phy;
-}
-
static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
{
struct phy_provider *phy;
@@ -126,27 +200,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
struct phy_axg_mipi_pcie_analog_priv *priv;
struct device_node *np = dev->of_node;
struct regmap *map;
- struct resource *res;
- void __iomem *base;
int ret;
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base)) {
- dev_err(dev, "failed to get regmap base\n");
- return PTR_ERR(base);
- }
-
- map = devm_regmap_init_mmio(dev, base,
- &phy_axg_mipi_pcie_analog_regmap_conf);
+ /* Get the hhi system controller node */
+ map = syscon_node_to_regmap(of_get_parent(dev->of_node));
if (IS_ERR(map)) {
- dev_err(dev, "failed to get HHI regmap\n");
+ dev_err(dev,
+ "failed to get HHI regmap\n");
return PTR_ERR(map);
}
+
priv->regmap = map;
priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
@@ -160,8 +227,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
phy_set_drvdata(priv->phy, priv);
dev_set_drvdata(dev, priv);
- phy = devm_of_phy_provider_register(dev,
- phy_axg_mipi_pcie_analog_xlate);
+ phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread